Selective and Accurate Detection of Nitrate in Aquaculture Water with Surface-Enhanced Raman Scattering (SERS) Using Gold Nanoparticles Decorated with β-Cyclodextrins

Zhen Li, Yang Hu, Liu Wang, Houfang Liu, Tian‐Ling Ren, Cong Wang, Daoliang LiSensors 2024 · DOI

TL;DR

This paper presents a novel Surface-Enhanced Raman Scattering (SERS) method for the selective and accurate detection of nitrate in aquaculture water. By functionalizing gold nanoparticles with β-cyclodextrin, the researchers created a highly sensitive substrate that overcomes limitations of existing methods, paving the way for improved water quality monitoring in aquaculture.

What Problem Does This Paper Address?

Aquaculture is a vital industry, but maintaining water quality is crucial for the health of aquatic organisms and the safety of products. Nitrate nitrogen, a common pollutant originating from fish feed and waste, poses a threat to aquatic life and can convert into more toxic nitrite. Existing methods for nitrate detection, such as ion-selective electrodes and spectrophotometry, often suffer from low sensitivity, narrow linear ranges, poor selectivity, or require complex instrumentation and sample preparation. This makes real-time, accurate monitoring in dynamic aquaculture environments challenging. The authors aim to develop a more effective SERS-based approach to address these limitations.

Methods

The core of this work is the development of a novel SERS substrate: β-cyclodextrin-modified gold nanoparticles (SH-β-CD@AuNPs). Here's how it works:

  1. Nitrate to Nitrite Conversion: Nitrate ions (NO₃⁻) are first converted into nitrite ions (NO₂⁻) using vanadium(III) chloride (VCl₃) under acidic conditions. This is a key step because nitrite is more reactive in the subsequent detection chemistry.
  2. BTAH Formation: The nitrite ions then react with o-phenylenediamine (OPD) to form benzotriazole (BTAH). This molecule is the target analyte for SERS detection.
  3. SERS Substrate: The SH-β-CD@AuNPs substrate is crucial. Gold nanoparticles (AuNPs) provide the surface for Surface-Enhanced Raman Scattering. The β-cyclodextrin (β-CD) molecules, attached via thiol groups, create a supramolecular structure. This β-CD shell is designed to selectively bind BTAH, enhancing its SERS signal and improving selectivity.
  4. SERS Detection: The BTAH, now bound to the SH-β-CD@AuNPs, is analyzed using SERS. The characteristic Raman peaks of BTAH are then correlated to the original nitrate concentration.

The preparation of the SH-β-CD@AuNPs involved synthesizing AuNPs using sodium citrate reduction and then modifying them with mono-(6-mercapto)-β-cyclodextrin. The experimental conditions, including pH, temperature, reaction time, and reactant concentrations, were optimized for maximum sensitivity and accuracy.

Datasets

The study utilized standard laboratory reagents and prepared nitrate solutions of varying concentrations for calibration and validation. Real water samples were collected from:

  • Tap water
  • Aquaculture water from a fish tank (carp)
  • Aquaculture water from land-based factories (grouper)
  • Seawater

These samples were spiked with known nitrate concentrations to evaluate the method's performance in complex matrices. No new benchmark datasets were introduced; rather, existing water types were used for practical validation.

Key Insights and Ideas

  • Supramolecular Synergy: The combination of gold nanoparticles (for SERS enhancement) and β-cyclodextrin (for selective binding) is a powerful strategy. The β-CD's hydrophobic cavity effectively "traps" the BTAH, leading to a significant boost in SERS signal and improved selectivity compared to bare AuNPs.
  • Indirect Detection Power: Converting nitrate to nitrite, and then to BTAH, is an ingenious indirect detection method. This multi-step process allows for the use of a highly sensitive SERS probe (BTAH) that wouldn't be directly formed from nitrate.
  • Optimized Reaction Conditions: The paper meticulously details the optimization of various parameters (pH, temperature, time, concentrations). This highlights the importance of fine-tuning each step for robust and reliable results. For instance, achieving an optimal pH of 2.5 was critical for the cyclization reaction.
  • Stability and Reproducibility: The SH-β-CD@AuNPs substrate demonstrated good stability over three weeks and excellent reproducibility across different batches, crucial for practical, real-world applications.

Key Results

  • High Sensitivity: The developed SERS method achieved very low detection limits (LOD) for nitrate, with the lowest being 1.05 × 10⁻² µmol/L at the 1600 cm⁻¹ peak.
  • Wide Linear Range: The method demonstrated a reliable linear relationship for nitrate concentrations in the range of 0.1–30.0 µmol/L.
  • Distinct SERS Peaks: BTAH exhibited clear SERS characteristic peaks at 1168, 1240, 1375, and 1600 cm⁻¹, allowing for accurate identification and quantification.
  • Excellent Selectivity: The method showed high selectivity, with minimal interference from common ions found in aquaculture water (e.g., Cl⁻, SO₄²⁻, NH₄⁺, Fe³⁺, Mg²⁺) at concentrations 100 times higher than nitrate.
  • Real-World Validation: The method performed well on actual aquaculture water samples, with spiked recoveries ranging from 96.8% to 103.4% and relative standard deviations between 1.89% and 4.21%.

Limitations and Future Work

  • Interference from Nitrite: While the method is selective for nitrate, the initial conversion step means that the presence of nitrite in the original sample needs to be accounted for. The authors address this by suggesting a simultaneous measurement of nitrite and total nitrate+nitrite, then calculating nitrate by subtraction.
  • "Dual-Mode" Detection: The authors propose future research focusing on a "dual-mode" detection approach, combining SERS with fluorescence. This aims to further enhance detection accuracy, sensitivity, and selectivity by leveraging the SH-β-CD@AuNPs substrate for both sensing mechanisms.

Summary updated

Abstract

A surface-enhanced Raman scattering (SERS) method for measuring nitrate nitrogen in aquaculture water was developed using a substrate of β-cyclodextrin-modified gold nanoparticles (SH-β-CD@AuNPs). Addressing the issues of low sensitivity, narrow linear range, and relatively poor selectivity of single metal nanoparticles in the SERS detection of nitrate nitrogen, we combined metal nanoparticles with cyclodextrin supramolecular compounds to prepare a AuNPs substrate enveloped by cyclodextrin, which exhibits ultra-high selectivity and Raman activity. Subsequently, vanadium(III) chloride was used to convert nitrate ions into nitrite ions. The adsorption mechanism between the reaction product benzotriazole (BTAH) of o-phenylenediamine (OPD) and nitrite ions on the SH-β-CD@AuNPs substrate was studied through SERS, achieving the simultaneous detection of nitrate nitrogen and nitrite nitrogen. The experimental results show that BTAH exhibits distinct SERS characteristic peaks at 1168, 1240, 1375, and 1600 cm<sup>-1</sup>, with the lowest detection limits of 3.33 × 10<sup>-2</sup>, 5.84 × 10<sup>-2</sup>, 2.40 × 10<sup>-2</sup>, and 1.05 × 10<sup>-2</sup> μmol/L, respectively, and a linear range of 0.1-30.0 μmol/L. The proposed method provides an effective tool for the selective and accurate online detection of nitrite and nitrate nitrogen in aquaculture water.
BibTeX
@inproceedings{li2024selective,
  author = {Zhen Li and Yang Hu and Liu Wang and Houfang Liu and Tian‐Ling Ren and Cong Wang and Daoliang Li},
  title = {{Selective and Accurate Detection of Nitrate in Aquaculture Water with Surface-Enhanced Raman Scattering (SERS) Using Gold Nanoparticles Decorated with β-Cyclodextrins}},
  booktitle = {Sensors},
  year = {2024},
  doi = {10.3390/s24041093},
}
Figure