Seepage Time Soft Sensor Model of Nonwoven Fabric Based on the Extreme Learning Machine Integrating Monte Carlo

Jing Zhang, Yiqiang Fan, Lulu Zhang, Chi Xu, Xiaobin Dong, Luyao Liu, Zhongping Zhang, Xianbo QiuSensors 2021 · DOI

TL;DR

This paper introduces a novel "MCELM" model that combines Monte Carlo (MC) data augmentation with Extreme Learning Machines (ELM) to accurately and rapidly predict the liquid seepage time in nonwoven fabrics. This approach is crucial for optimizing manufacturing processes, particularly for critical applications like masks during the COVID-19 pandemic.

What Problem Does This Paper Address?

Nonwoven fabrics are essential materials, especially for protective equipment like masks, due to their unique porous structure that allows for breathability while filtering particles. However, accurately modeling and predicting how liquids (like dyes or bodily fluids) penetrate these complex structures is challenging. Traditional methods are often slow and computationally expensive, hindering rapid manufacturing and quality control. Specifically, predicting the "seepage time" – the time it takes for a liquid to permeate the fabric – is critical for optimizing dyeing processes and ensuring the efficacy of protective materials. The paper aims to bridge this gap by developing a fast and accurate predictive model for this seepage time.

Methods

The core of this work is the development of the MCELM (Monte Carlo - Extreme Learning Machine) model. The process involves two main stages:

  1. Data Augmentation with Monte Carlo (MC): Recognizing that experimental data for nonwoven fabric properties can be scarce, the researchers employ the Monte Carlo method. This technique is used to generate synthetic data samples, effectively expanding the original dataset. This is crucial for training robust machine learning models, especially when dealing with limited real-world measurements. The paper also includes a T-test to statistically verify that the expanded data is not significantly different from the original data, ensuring its validity.
  2. Prediction with Extreme Learning Machine (ELM): Once the data is augmented, an Extreme Learning Machine (ELM) is used to build the predictive model. ELM is a type of single-hidden-layer feed-forward neural network known for its fast training speed and good generalization performance, as its hidden layer weights and biases are randomly initialized and not iteratively adjusted. The ELM learns the complex relationship between the physical and structural characteristics of the nonwoven fabric (like pore size, porosity, height) and the liquid seepage time.

The MCELM model is then compared against traditional Back Propagation (BP) neural networks and Radial Basis Function (RBF) neural networks, also augmented with MC (MCBP and MCRBF), to demonstrate its superiority.

Datasets

The study utilizes a dataset of real dyeing data collected from experimental tests. This dataset includes input variables such as bore diameter (nm), porosity (%), and height (mm) of the nonwoven fabric, and the output variable is the dyeing time (s). Due to the limited size of this real-world dataset, the Monte Carlo method was employed to generate additional samples, creating an expanded dataset for training and evaluation.

Key Insights and Ideas

  • Data Augmentation is Key for Complex Materials: The paper highlights the critical role of data augmentation techniques like Monte Carlo when dealing with the inherent complexity and variability of materials like nonwoven fabrics, where obtaining extensive experimental data can be costly and time-consuming.
  • ELM's Efficiency for Nonwoven Fabric Modeling: Extreme Learning Machines prove to be a highly effective and efficient choice for modeling the nonwoven fabric seepage process, offering a significant speed advantage over traditional neural networks.
  • Bridging Microstructure and Macroscopic Behavior: The MCELM model successfully establishes a link between the physical/structural characteristics of nonwoven fabrics and their liquid seepage behavior, offering a new perspective for understanding and predicting material performance.
  • Practical Implications for Manufacturing: The ability to accurately and rapidly predict seepage time has direct implications for optimizing manufacturing processes, leading to improved quality, reduced waste, and increased production efficiency.

Key Results

The MCELM model demonstrated superior performance compared to MCBP and MCRBF:

  • Accuracy: The MCELM achieved the lowest prediction error, with a minimum error of 4.22% when using 10 hidden layer nodes. This was 1.56% lower than MCBP and 0.39% lower than MCRBF.
  • Speed: The MCELM model significantly reduced prediction time. While COMSOL simulations took approximately 90 seconds per data point, the MCELM model could predict immersion time in under 6 seconds, with the overall run time being considerably faster than BP and RBF methods.
  • Statistical Validation: A T-test confirmed that the data expanded by the MC method showed no significant difference from the original experimental data, validating the augmentation process.

Limitations and Future Work

  • Limited Experimental Data: While MC addresses data scarcity, the initial reliance on a small experimental dataset is a limitation. The paper validates the MC expansion, but further studies with larger, diverse datasets would strengthen the model.
  • Generalizability: The study focuses on dyeing time. Future work could explore the model's applicability to other liquid seepage scenarios (e.g., filtration, absorption) and different types of nonwoven fabrics.
  • Parameter Optimization: While the paper explores different numbers of hidden layer nodes, further systematic hyperparameter tuning for the ELM could potentially yield even better results.
  • Real-time Application: The paper demonstrates rapid prediction, but integrating this into real-time manufacturing feedback loops could be a future direction.

Summary updated

Abstract

Nonwoven fiber materials are materials with multifunctional purposes, and are widely used to make masks for preventing the new Coronavirus Disease 2019. Because of the complexity and particularity of their structure, it becomes difficult to model the penetration and flow characteristics of liquid in nonwoven fiber materials. In this paper, a novel seepage time soft sensor model of nonwoven fabric, based on Monte Carlo (MC), integrating extreme learning machine (ELM) (MCELM) is proposed. The Monte Carlo method is used to expand data samples. Then, an ELM method is used to establish the prediction model of the dyeing time of the nonwoven fiber material overlaps with the porous medium, as well as the insertion degree and height of the different quantity of hides. Compared with the back propagation (BP) neural network and radial basis function (RBF) neural network, the results show that the prediction model based on the MCELM method has significant power in terms of accuracy and prediction speed, which is conducive to the precise and rapid manufacture of nonwoven fiber materials in practical applications between liquid seepage characteristics and structural characteristics of porous media. Furthermore, the relationship between the proposed models has certain value for predicting the behavior and use of nonwoven fiber materials with different structural characteristics and related research processes.
BibTeX
@inproceedings{zhang2021seepage,
  author = {Jing Zhang and Yiqiang Fan and Lulu Zhang and Chi Xu and Xiaobin Dong and Luyao Liu and Zhongping Zhang and Xianbo Qiu},
  title = {{Seepage Time Soft Sensor Model of Nonwoven Fabric Based on the Extreme Learning Machine Integrating Monte Carlo}},
  booktitle = {Sensors},
  year = {2021},
  doi = {10.3390/s21072377},
}
Figure