Abstract
In robotic path planning, the shortest path is not always the most desirable. Often, specific topological constraints—such as navigating to the left or right of an obstacle—must be respected. This paper introduces a method to perform path planning under homotopy class constraints by leveraging complex analysis. By defining a complex function with singularities (poles) inside obstacles, the line integral along a path yields a unique "L-value" representing its homotopy class. This L-value is integrated into an augmented state-space graph, enabling standard search algorithms like A* to find optimal paths within specified topological constraints. The approach is evaluated on various grid and visibility graph environments, demonstrating efficiency and versatility.
Introduction
Standard robot path planning typically focuses on finding the shortest collision-free path from a start to a goal. However, complex scenarios—such as multi-robot coordination, surveillance avoidance, or specific mission parameters—often require the robot to navigate around obstacles in a particular way. These distinct navigation strategies are known as homotopy classes. Two paths belong to the same homotopy class if one can be continuously deformed into the other without intersecting any obstacles.
Historically, planning with these constraints was computationally expensive and relied on complex geometric representations that struggled with irregular obstacles or non-Euclidean cost functions. This paper addresses these challenges by transforming abstract topological constraints into a numerical state variable that can be seamlessly integrated into robust graph-search frameworks.
Methodology
Complex Analysis and the L-Value
The proposed method treats the 2D environment as a complex plane ($\mathbb{C}$). For each obstacle that defines a relevant homotopy constraint, a "representative point" or pole ($a_i$) is placed within its interior. A special complex function, $\mathcal{F}(z)$, is defined such that it has singularities at these poles.
By applying the Cauchy Integral Theorem, the authors demonstrate that the line integral of this function along a path results in a value—the "L-value"—that uniquely identifies the path's homotopy class. If two paths share the same L-value, they are topologically equivalent relative to the chosen poles.
L-Augmented Graph Search
To find the optimal path within a specific class, the search space is expanded. Instead of defining a state solely by its coordinates $(x, y)$, the state is augmented to include the current L-value: $(x, y, L)$. This process effectively "unrolls" the environment, allowing the search algorithm to distinguish between states that are physically identical but reached via different topological routes.
Because the constraint is now a state variable, standard algorithms like A* or Dijkstra’s can be employed to find the lowest-cost path within a desired homotopy class or to identify the top $N$ best paths across different classes.
Key Insights and Results
- Topology as a State Variable: Reducing complex topological properties to a single complex number allows for a unified approach to path planning.
- Discretization Independence: The method works across various environmental representations, including uniform grids and visibility graphs.
- Noise Filtering: Designers can ignore irrelevant obstacles (like sensor noise) by simply not placing representative poles within them, while still avoiding them physically during the search.
- Efficiency: In large-scale $1000 \times 1000$ environments, the algorithm found optimal paths in the primary homotopy class in approximately 1.7 seconds. Finding the 10th-best class took roughly 20.8 seconds, demonstrating scalability.
Conclusion and Future Work
This complex-analytic approach provides a mathematically rigorous and computationally efficient framework for constrained path planning. While highly effective in 2D, extending this work to 3D environments remains a challenge, as homotopy in 3D involves different topological structures (like knots) that do not map directly to 2D complex analysis. Future research will also explore improving numerical precision for extremely long paths and automating the selection of representative points for complex obstacle geometries.
Summary updated