Schematic Diagrams Design of Displacement Suppression Mechanism with One Degree-of-Freedom in a Rope-Guided Hoisting System

Lu Yan, Guohua Cao, Naige Wang, Weihong PengSymmetry 2020 · DOI

TL;DR

This paper introduces a systematic method for designing displacement suppression mechanisms (DSMs) for rope-guided hoisting systems, crucial for deep mining operations. By employing topological graph theory and a novel vertex symmetry identification approach, the authors generate and analyze a library of four-bar and six-bar DSM schematics, offering practical solutions for various shaft conditions.

What Problem Does This Paper Address?

Deep mining operations are increasingly common, requiring hoisting systems that can handle heavier loads at higher speeds with greater stability. Rope-guided hoisting systems, while common, face challenges with lateral stiffness of guide rails, especially at greater depths. This can lead to significant swinging of the hoisting conveyance, posing safety risks. While tensioning the guide ropes can help, it has limitations. The paper addresses the need for effective Displacement Suppression Mechanisms (DSMs) that can actively counteract this lateral deflection, particularly in confined mine shaft spaces. The challenge lies in systematically designing and identifying suitable DSM configurations from a vast design space of possible mechanisms.

Methods

The authors propose a multi-step approach to design and identify DSM schematic diagrams:

  • Topological Graph Representation: Mechanisms are first represented as topological graphs, simplifying them into planar four-bar and six-bar structures.
  • Extended Adjacency Matrix: A novel "extended adjacency matrix" is defined to capture not only the connectivity of kinematic parts but also the types of joints (prismatic/revolute) and the position of mechanical racks. This matrix is crucial for distinguishing between different schematic diagrams that might arise from the same topological graph.
  • Vertex Symmetry Identification: A two-step method is introduced to identify symmetrical vertices within topological graphs. This involves checking for "equal adjacency symmetry" (identical adjacent relationships) and "equivalent adjacency symmetry" (symmetry under different numbering schemes). This step is key to reducing redundant designs and identifying unique mechanism structures.
  • Computational Identification Procedure: A detailed algorithm is presented that uses the identified symmetrical vertexes and rack positions to generate all possible extended adjacency matrices for four-bar and six-bar mechanisms with one or two prismatic joints.
  • Schematic Diagram Generation: The extended adjacency matrices are then used to derive the actual schematic diagrams of the DSMs.

Datasets

Not discussed in the paper. The paper focuses on a systematic design methodology rather than training or evaluating on existing datasets.

Key Insights and Ideas

  • Systematic Design for DSMs: The paper moves beyond ad-hoc design by providing a structured, algorithmic approach to generate and classify DSM schematics.
  • Importance of Extended Adjacency Matrix: This novel matrix is crucial for accurately representing and differentiating schematic diagrams, going beyond simple topological connectivity.
  • Vertex Symmetry for Efficiency: The symmetry identification method effectively prunes the design space, ensuring that only non-isomorphic and distinct DSM configurations are generated.
  • Four-bar vs. Six-bar Trade-offs: The analysis highlights that four-bar mechanisms are simpler, lighter, and suitable for smaller spaces with less swing, while six-bar mechanisms offer greater stability and resistance, making them ideal for wider shafts in deep mines.
  • Prismatic Joint Role: The paper emphasizes the role of prismatic joints, often in conjunction with a spring, in enabling the locking mechanism required for DSMs.

Key Results

The paper successfully generates a set of alternative schematic diagrams for one-DOF four-bar and six-bar DSMs. The analysis categorizes these mechanisms based on their structure (number of bars, joints, rack position) and provides recommendations:

  • Four-bar mechanisms: Suitable for mine shafts with limited space and minimal swing, offering simplicity and fewer parts.
  • Six-bar mechanisms: Particularly those with two prismatic joints and a three-degree mechanical rack, are recommended for wider shafts in deep mines due to their enhanced stability and double resistant force.

The paper demonstrates that these generated DSMs fulfill the requirements of swinging within a certain angle and being lockable in limited positions.

Limitations and Future Work

  • Focus on 4-bar and 6-bar: The study limits its scope to four-bar and six-bar mechanisms, acknowledging that higher-order mechanisms (8, 10, 12 bars) would introduce significant complexity.
  • Dimension Synthesis: While schematic diagrams are provided, the paper explicitly states that "dimension synthesis to each structure is still required to be solved." This means optimizing the actual dimensions of the parts for specific applications is a necessary next step.
  • Experimental Validation: The paper focuses on theoretical design and identification; experimental validation of the proposed DSMs in real-world mine shaft conditions is not presented.

Future work should focus on the dimension synthesis of the proposed DSM structures and their experimental validation to confirm their performance in practical rope-guided hoisting systems.

Summary updated

BibTeX
@article{yan2020schematic,
  author = {Lu Yan and Guohua Cao and Naige Wang and Weihong Peng},
  title = {{Schematic Diagrams Design of Displacement Suppression Mechanism with One Degree-of-Freedom in a Rope-Guided Hoisting System}},
  journal = {Symmetry},
  year = {2020},
  doi = {10.3390/sym12030474},
}
Figure