TL;DR
This study uses satellite data from the Tropospheric Emissions Spectrometer (TES) to track pollution outflow from Mexico City, finding that TES can capture regional pollution plumes but struggles with precise measurements directly over the city due to retrieval limitations. The paper highlights discrepancies between satellite and in-situ measurements of CO variability, impacting the reliability of satellite-derived ozone-CO correlations for mapping pollution.
What Problem Does This Paper Address?
Mega-cities are significant sources of air pollution with far-reaching impacts on regional and global air quality and climate. Mexico City, a megacity with over 19 million inhabitants, is particularly notorious for its high pollution levels, stemming from household activities and vehicle emissions. Understanding how this pollution disperses and transforms in the atmosphere is crucial for effective air quality management and climate modeling. While in-situ aircraft campaigns provide detailed measurements, satellite observations offer broader spatial coverage. However, validating and interpreting satellite data, especially for complex pollution plumes, requires careful comparison with ground-based or airborne measurements. This paper addresses the challenge of using satellite data (specifically TES) to observe and quantify pollution outflow from Mexico City, comparing it with aircraft measurements and a chemical transport model to assess its capabilities and limitations.
Methods
The study employs a multi-pronged approach:
- Aircraft Measurements: Data from the MILAGRO/INTEX-B campaigns, utilizing the NASA DC-8 and NSF C-130 aircraft, provided in-situ measurements of ozone (O3), carbon monoxide (CO), and nitrogen oxides (NOx). These measurements were crucial for validating satellite data and understanding the fine-scale pollution plumes.
- Satellite Observations: The Tropospheric Emission Spectrometer (TES) aboard the Aura satellite provided vertical profiles of O3 and CO. The paper details the TES retrieval process, including the application of averaging kernels to account for the instrument's vertical resolution and a priori information.
- Chemical Transport Modeling: The GEOS-Chem global 3-D chemical transport model was used to simulate atmospheric composition. Model results were convolved with TES averaging kernels to enable direct comparison with TES retrievals.
The core of the methodology involves comparing the spatial and temporal variability of O3 and CO, as well as their correlation (ΔO3/ΔCO), across these three data sources.
Datasets
- MILAGRO/INTEX-B Aircraft Data: In-situ measurements of O3, CO, and NOx from the NASA DC-8 and NSF C-130 aircraft during March 2006, focusing on the region around Mexico City.
- Tropospheric Emission Spectrometer (TES) Data: Version 3 (V003, F04_04) O3 and CO retrievals from March 2006, covering the Mexico City Metropolitan Area (MCMA) and surrounding regions.
- GEOS-Chem Model Output: Simulated O3 and CO concentrations from the GEOS-Chem model (version 7-04-10) for September 2005-March 2006, with a focus on March 2006.
Key Insights and Ideas
- TES Captures Regional Outflow, Not City Center: While TES shows significant enhancements in O3 and CO over regions downwind of Mexico City, it struggles to accurately capture pollution levels directly over the city. This is attributed to retrieval issues and the instrument's relatively coarse spatial resolution.
- CO Variability Discrepancy: A key finding is the significantly lower day-to-day and spatial variability in TES CO measurements compared to in-situ aircraft data. This discrepancy is a major concern.
- Impact on O3-CO Correlation: The reduced CO variability in TES data leads to an apparent overestimation of the O3-CO enhancement ratio (ΔO3/ΔCO) when derived from satellite observations compared to aircraft data. This challenges the direct use of TES O3-CO correlations for mapping continental pollution outflow.
- Model Performance: The GEOS-Chem model, even with a coarse resolution, showed some agreement with in-situ data but exhibited a low bias in CO, potentially due to emission inventory limitations.
Key Results
- Pollution Altitude: Pollution outflow from the MCMA was predominantly observed at altitudes between 600-800 hPa, consistent with the high elevation of the Mexico City Basin.
- O3-CO Correlation (In-situ): Aircraft measurements showed a strong O3-CO correlation (R=0.78) with an enhancement ratio (ΔO3/ΔCO) of 0.28 mol mol⁻¹ for the study domain.
- O3-CO Correlation (TES): TES data yielded a correlation coefficient of R=0.50 and a significantly higher enhancement ratio of ΔO3/ΔCO = 0.43 mol mol⁻¹.
- O3-CO Correlation (GEOS-Chem): The GEOS-Chem model showed a correlation of R=0.58 and an enhancement ratio of ΔO3/ΔCO = 0.25 mol mol⁻¹ (with TES averaging kernels applied).
Limitations and Future Work
- TES Retrieval Limitations: The paper explicitly notes poor sensitivity for O3 and CO over the Mexico City Basin itself, hindering direct measurements of the source. Further investigation into these retrieval issues is ongoing.
- Spatiotemporal Mismatch: Direct comparison of absolute concentrations between TES and aircraft data is challenging due to differences in sampling times and spatial coverage.
- Model Resolution: The 2° x 2.5° resolution of the GEOS-Chem model may be too coarse to fully capture the spatial variability of pollution outflow.
- Future Work: The authors suggest that the application of TES CO-O3 correlation to map continental pollution outflow needs further examination due to the observed discrepancies. Improving model simulations with finer horizontal resolutions is also recommended to better understand pollution dynamics.
Summary updated