SAR IMAGE DESPECKLING BY SELECTIVE 3D FILTERING OF MULTIPLE COMPRESSIVE RECONSTRUCTED IMAGES

Mahboob Iqbal, Jie Chen, Wei Yang, Pengbo Wang, Bing SunElectromagnetic 2013 · DOI

Abstract

A novel despeckling technique for Synthetic Aperture Radar (SAR) images is presented, leveraging multiple image reconstruction and selective 3-dimensional filtering. By applying Compressive Sensing (CS) theory to multiple subsets of pixels derived from a single SAR image, a stack of reconstructed images is generated. These images are then merged using a gradient-aware 3D filtering process that distinguishes between edge and non-edge regions. Experimental results on TerraSAR-X data demonstrate that this approach significantly improves visual quality and quantitative metrics such as the Equivalent Number of Looks (ENL) and Edge Save Index (ESI) compared to state-of-the-art methods.

Introduction

Synthetic Aperture Radar (SAR) provides critical high-resolution Earth observation data regardless of weather or light conditions. However, the coherent nature of SAR imaging introduces "speckle," a multiplicative noise that degrades image interpretability and complicates automated analysis. Traditional denoising methods often struggle to balance noise suppression with the preservation of fine spatial details. This paper proposes a framework that synthesizes multiple observations from a single image to exploit statistical redundancy for superior despeckling.

Proposed Methodology

The proposed framework operates in three primary stages: subset selection, multiple compressive reconstruction, and selective 3D filtering.

Figure 1: Flowchart of the proposed SAR image despeckling technique showing the path from the original image to the final clean output.

1. Subset Selection

To simulate multiple observations from a single source, the original SAR image is partitioned into $P$ mutually exclusive pixel groups. From these, $T$ distinct subsets are formed. A key constraint is that each subset must contain at least 20% unique pixels compared to any other subset, ensuring diverse noise realizations across the generated "views."

2. Multiple Compressive Reconstruction

Each subset serves as a measurement vector within a Compressive Sensing framework. Using the GPSR algorithm and Haar wavelets, a full SAR image is reconstructed for each subset. The inherent sparsity constraints of CS reconstruction act as a preliminary noise filter, as high-frequency speckle is less likely to be represented in the sparse wavelet domain.

3. Selective 3D Filtering

The final "clean" image is produced by merging the stack of reconstructed images (70 in the implemented study). A gradient-based decision mechanism determines the filtering strategy for each pixel to optimize the balance between smoothing and detail preservation:

  • Edge Pixels: In regions with high gradients (features), a 1x1xT mean kernel (pixel-wise average) is used to maintain sharp transitions.
  • Non-Edge Pixels: In smooth regions with low gradients, a 3x3xT median filter is applied to aggressively suppress noise across both spatial and temporal (stack) dimensions.
Figure 5: Detailed view of the selective 3D filtering process, illustrating the different kernels applied to edge and non-edge pixels.

Experimental Results

The technique was validated using real-world TerraSAR-X satellite data across maritime, urban, and rural scenes.

Quantitative Performance

The proposed method consistently outperformed benchmarks such as Lee, Frost, BM3D, and PPB. Notably, for complex urban scenes in Tianjin, the method achieved an Equivalent Number of Looks (ENL) of 44.96, nearly doubling the 26.22 achieved by the high-performing BM3D algorithm. High Edge Save Index (ESI) values further confirmed that the gradient-aware filtering successfully protected structural details while smoothing homogeneous areas.

Visual Quality

Qualitative analysis shows that the proposed method produces cleaner images with fewer artifacts than patch-based methods. The "synthetic multi-looking" effectively smooths background noise, while the selective filter prevents the blurring of critical edges, such as those found on ships or urban infrastructure.

Conclusion

By combining Compressive Sensing with a selective 3D filtering strategy, this research provides a robust solution for SAR image despeckling. The ability to generate and statistically merge multiple reconstructions from a single source image overcomes the limitations of traditional single-image filters, offering a significant advancement for high-resolution radar imaging applications.

Summary updated

Abstract

A despeckling technique based on multiple image reconstruction and selective 3-dimensional filtering is proposed. Multiple SAR images are reconstructed from a single SAR image by employing compressive sensing (CS) theory. In order to obtain multiple images from single SAR image, multiple subsets of pixels are selected from input SAR image by imposing restriction that each subset has at least 20% different pixels from any other subset. These subsets are taken as measurement vectors in CS framework to obtain multiple SAR images. A despeckled image is obtained by employing selective 3-dimensional filtering to multiple reconstructed SAR image. The proposed technique is tested on single look complex TerraSAT-X data set, and experimental results exhibit that the proposed technique outperformed benchmark despekling methods in terms of visual quality and despeckling quality metrics.
BibTeX
@inproceedings{iqbal2013sar,
  author = {Mahboob Iqbal and Jie Chen and Wei Yang and Pengbo Wang and Bing Sun},
  title = {{SAR IMAGE DESPECKLING BY SELECTIVE 3D FILTERING OF MULTIPLE COMPRESSIVE RECONSTRUCTED IMAGES}},
  booktitle = {Electromagnetic},
  year = {2013},
  doi = {10.2528/pier12091504},
}
Figure