Abstract
To improve the energy-saving effect of power grids, a safe and energy-saving dispatching method for large power grids considering demand response is proposed. From the perspective of grid load, power generation capacity, transmission capacity, and energy supply, the demand response of grid energy-saving dispatching is analyzed. This paper also conducts research on energy-saving dispatch of the power grids based on the analysis results and from the perspective of loss control. The experimental results show that the operation efficiency of the distribution network has been significantly improved after the dispatching method in this paper, which shows that the large power grid security and energy-saving dispatching method considering demand response has high practicability.
Introduction
As power grids expand and incorporate volatile renewable energy sources and big data technologies, traditional dispatching methods are struggling to keep up. The core challenge is twofold: maintaining absolute grid safety while minimizing the massive energy losses that occur during generation, transmission, and distribution. Existing methods often fail to account for the dynamic nature of user demand or the specific "marginal" costs of increasing power at different nodes. There is a pressing need for a "smarter" scheduling approach that doesn't just react to load changes but proactively manages them through interactive participation from both power plants and end-users.
Methodology
The authors developed a multi-layered dispatching framework built on two primary pillars:
Four-Pillar Demand Analysis
The system evaluates the grid through four lenses:
- Load Analysis: Predicting peak/valley trends using historical and weather data.
- Generation Capacity: Monitoring equipment health and efficiency.
- Transmission Capacity: Evaluating network reliability and upgrading paths.
- Energy Supply: Making decisions based on the mix of coal, nuclear, gas, and renewables.
Mathematical Loss and Risk Modeling
- Marginal Energy Consumption ($\lambda_k$): The paper introduces a formula to calculate the ratio of change in coal consumption to the total system load increment. This allows the system to identify which units are most efficient to "ramp up" at any given moment.
- Power Risk Severity Function ($Y$): To prevent system instability, the authors use a severity function that defines the "bearing limit" of the grid. This helps avoid "excessive storage events" and ensures that energy-saving measures don't compromise safety.
- Interactive Scheduling: Unlike top-down "command and control" models, this method grants partial autonomy to generators and users, allowing them to adjust plans for economic benefit without hitting safety thresholds.
Experimental Setup
The study evaluated the method using a simulated 10 kV medium voltage distribution network. This testbed consisted of 10 nodes, providing a controlled environment to measure efficiency and response rates over a three-month period.
Results and Discussion
The experimental results showed a dramatic improvement over traditional load-side demand response technology. The proposed method maintained a consistent 99.99% operation efficiency across all three test months, whereas the baseline technology fluctuated between 45% and 56%.
Comparative Advantages
The shift from "empirical scheduling" (relying on past experience) to "early warning and pre-control" is the primary driver of the efficiency gains. By focusing on the marginal cost of coal consumption rather than average costs, the dispatcher can make much finer adjustments to which plants are carrying the load.
Key performance metrics include:
- User Output Rate: In the first month of simulation, the user output rate increased by 31.2% compared to the baseline.
- Design Accuracy: The system achieved 100% distribution design accuracy, significantly higher than the ~66% seen in the baseline technology.
Conclusion
The proposed dispatching method successfully balances grid safety with aggressive energy-saving goals. By integrating demand response and sophisticated loss control, it moves the grid toward "fine scheduling" and "intelligent control." Future research will focus on scaling these mathematical models to national-level grids and integrating complex electricity market pricing models.
Summary updated