Abstract
Bridging the "reality gap" remains a significant challenge in robotics. While reinforcement learning (RL) policies trained in simulation can be transferred to the real world, they often suffer from suboptimality or instability when faced with evolving environmental conditions. This paper presents Safe Continual Domain Adaptation (SCDA), a framework that enables robots to safely and continuously fine-tune their control policies after deployment. By combining safe RL with continual learning techniques, SCDA allows for environment-specific optimization while maintaining strict safety constraints and preventing the "catastrophic forgetting" of initial training.
Introduction
Training robotic systems directly in the real world is often impractical due to high costs, time requirements, and the risk of hardware damage. Consequently, simulation-to-reality (Sim2Real) transfer is the standard approach. However, simulations are imperfect models of reality. Techniques like Domain Randomization (DR) attempt to solve this by training policies to be robust across a wide range of simulated parameters. While effective for transfer, DR often results in "conservative" policies that lack peak performance in any specific real-world setting. Furthermore, real-world conditions—such as mechanical wear or temperature fluctuations—change over time, necessitating post-deployment adaptation. Standard online RL adaptation is often too dangerous for physical hardware due to its unstable exploration phases.
Methodology: The SCDA Framework
The SCDA framework addresses these challenges by integrating three core components to ensure that adaptation is both effective and safe.
- Safe Reinforcement Learning (PCRPO): To mitigate the risks of online exploration, the authors utilize Policy Constraint Reward Policy Optimization. This algorithm incorporates a "safety critic" that enforces predefined safety bounds (e.g., joint limits or collision avoidance) during both simulation and real-world adaptation.
- Continual Learning (EWC): To prevent the robot from losing the general capabilities learned in simulation while adapting to a specific environment, the framework employs Elastic Weight Consolidation. EWC uses the Fisher Information Matrix (FIM) to identify neural network weights critical to the general task. During adaptation, changes to these "important" weights are penalized, while less critical weights are allowed to adjust to the new domain.
- Domain Randomization: Wide DR is used during the initial pretraining phase to provide a robust baseline and to calculate the initial parameter importance (FIM) required for EWC.
Experimental Evaluation
The framework was evaluated using a KUKA LBR iiwa 14 robotic arm on two distinct tasks:
- Reach-and-Balance: A 2-degree-of-freedom (DOF) task focused on reaching targets quickly while strictly avoiding joint limits.
- Grasping: A complex 7-DOF task involving a 3-finger Robotiq gripper, where the robot must successfully grasp a box while avoiding collisions with its stand.
Testing was conducted in both a high-fidelity "realistic" simulator and on physical hardware to validate the Sim2Real transfer and subsequent adaptation.
Key Insights and Results
A primary technical insight of this work is the effectiveness of selective plasticity. By using EWC, the model distinguishes between weights necessary for the core task and those that can be modified for environmental tuning.
As shown in the experimental results, SCDA significantly outperforms baseline methods:
- Performance Gains: In the grasping task, SCDA improved the real-world success rate from a 20% zero-shot baseline to 60% after adaptation.
- Safety Maintenance: Unlike standard adaptation methods that often violate constraints to maximize rewards, SCDA reduced safety costs to zero during the adaptation process.
- Stability: The framework maintained high performance across a variety of targets, avoiding the overfitting issues seen in non-continual adaptation methods.
Conclusion and Future Work
SCDA demonstrates that safe, continuous adaptation in the real world is achievable by combining safety-constrained optimization with importance-aware weight updates. This allows robots to evolve from "jack-of-all-trades" robust policies to environment-specific "experts."
Future research will focus on automating the detection of domain shifts to eliminate the need for manual triggering of the adaptation mode. Additionally, the authors aim to integrate formal methods to provide even stronger safety guarantees during the earliest stages of policy learning.
Summary updated