Room TemperatureMagnetoresistance Property of Co-TiO2 NanocompositeFilm Prepared by StrongMagneticTarget Co-sputtering

Haoyu Chen, Yiwen Zhang, Zhong Wu, Zhenbo Qin, Shanshan Wu, Wenbin HuJournal of Inorganic Materials 2020 · DOI

Abstract

This study explores the fabrication of Co-TiO₂ nanocomposite films using a specialized "strong magnetic target" co-sputtering technique designed to inhibit cobalt oxidation. By maintaining cobalt in its metallic state within a TiO₂ insulating matrix, the researchers achieved a significant room-temperature tunneling magnetoresistance (TMR) of 8.25%. The results demonstrate a clear transition from metallic to tunneling-dominated transport as cobalt concentration decreases, offering a viable path for developing biocompatible spintronic components.

Introduction

Spintronics—electronics that exploit the intrinsic spin of electrons—require materials capable of maintaining high spin polarization. Nanocomposite films consisting of magnetic metal granules (such as Cobalt) embedded in an insulating matrix (like TiO₂) are prime candidates due to their Tunneling Magnetoresistance (TMR) properties.

A major manufacturing hurdle in creating these films is the tendency for cobalt to oxidize during the deposition process. This oxidation creates a "dead layer" around magnetic particles, destroying their spin properties and degrading the TMR effect. This paper addresses the challenge of depositing these materials simultaneously while preserving the pure metallic state of the cobalt granules.

Experimental Methods

The researchers employed a Strong Magnetic Target Co-sputtering method to overcome the oxidation issue. Unlike standard magnetron sputtering, this setup uses a high-intensity magnetic field at the cobalt target head. This innovation increases the kinetic energy and volume of sputtered cobalt particles, effectively "burying" them into the film before they can react with surrounding oxygen.

Chemical states were verified using X-ray Photoelectron Spectroscopy (XPS). As shown in the analysis of the Co 2p peaks, the strong magnetic target approach successfully maintained a high proportion of metallic cobalt across various concentrations, minimizing the formation of bivalent cobalt (Co²⁺).

XPS spectra of the Co 2p region for films with different Co concentrations, showing the dominance of metallic cobalt and minimal bivalent cobalt.

Key Insights and Results

Structural and Chemical Integrity

The study confirms that the "strong magnetic" approach effectively outruns oxidation. While traditional reactive sputtering often leads to significant cobalt oxide formation, this method ensures the granules remain primarily metallic. Structural analysis via X-ray Diffraction (XRD) and Transmission Electron Microscopy (TEM) confirmed the presence of hcp-structured cobalt nanoparticles.

Nanostructure and Magnetoresistance

High-resolution TEM imaging revealed that the cobalt nanoparticles range from 5 to 9 nm in diameter, with inter-particle spacings of approximately 1 to 2 nm. This specific morphology is the "sweet spot" required for efficient electron tunneling between isolated magnetic granules.

High-resolution TEM image showing hcp-Co nanoparticles embedded in the TiO₂ matrix with labeled crystal planes.

The film with 51.3 at% Co exhibited the most impressive performance, reaching a room-temperature TMR of 8.25%. This represents a marked improvement over previous Co-oxide composite studies. As the cobalt concentration decreased from 71.3 at% to 51.3 at%, the film's resistivity increased by nearly three orders of magnitude, signaling a transition from a metallic conductive regime to a tunneling-dominated regime.

Magnetic Phase Transition

The researchers observed a shift from ferromagnetism to superparamagnetism as the cobalt content decreased. At lower concentrations, the individual nanoparticles become small enough that their magnetic moments fluctuate thermally, a characteristic behavior of superparamagnetic systems that is highly desirable for certain sensor applications.

Conclusion and Future Outlook

By utilizing a strong magnetic target co-sputtering technique, this research successfully produced Co-TiO₂ nanocomposite films with high room-temperature TMR. The use of TiO₂—a well-known biocompatible material—suggests that these films could be integrated into medical implants or advanced biosensors. Future work may focus on further refining particle distribution or exploring alternative insulating matrices to push TMR values even higher, potentially rivaling more complex magnetic tunnel junction architectures.

Summary updated

Abstract

Co-TiO 2 , ,
BibTeX
@article{chen2020room,
  author = {Haoyu Chen and Yiwen Zhang and Zhong Wu and Zhenbo Qin and Shanshan Wu and Wenbin Hu},
  title = {{Room TemperatureMagnetoresistance Property of Co-TiO<sub>2</sub> NanocompositeFilm Prepared by StrongMagneticTarget Co-sputtering}},
  journal = {Journal of Inorganic Materials},
  year = {2020},
  doi = {10.15541/jim20200020},
}
Figure