Room-Temperature Ammonia Sensor Based on ZnO Nanorods Deposited on ST-Cut Quartz Surface Acoustic Wave Devices

Wei Li, Yuanjun Guo, Yongliang Tang, Xiaotao Zu, Jinyi Ma, Lu Wang, Yongqing FuSensors 2017 · DOI

TL;DR

Researchers have developed a more sensitive and stable room-temperature ammonia sensor by depositing zinc oxide (ZnO) nanorods onto a surface acoustic wave (SAW) device. This nanorod-based sensor significantly outperforms a traditional ZnO thin-film sensor, offering a promising advancement for industrial safety and environmental monitoring.

What Problem Does This Paper Address?

Ammonia (NH3) is a critical industrial gas with significant implications for safety and health. Its detection is vital in various settings, from industrial processes to clinical diagnostics. While various ammonia sensors exist, including semiconductor and electrochemical types, Surface Acoustic Wave (SAW) sensors offer distinct advantages like high speed, small size, excellent sensitivity, low cost, and wireless capabilities. The core challenge lies in developing highly sensitive and stable sensing layers for these SAW devices that can operate effectively at room temperature, avoiding the need for complex temperature control systems. Previous research has explored ZnO as a sensing material, but the specific application of ZnO nanorods (NRs) grown via a simplified, seed-layer-free hydrothermal method on ST-cut quartz SAW devices for room-temperature ammonia sensing remained an underexplored area.

Methods

The study employed a seed-layer-free hydrothermal method to grow ZnO nanorods (NRs) directly onto ST-cut quartz SAW devices. This method is highlighted as being simpler and faster than conventional multi-step hydrothermal techniques. For comparison, a sol-gel and spin-coating technique was used to deposit a thin ZnO film (30 nm) onto similar SAW devices.

The fabricated SAW devices were characterized using:

  • Field-Emission Scanning Electron Microscopy (FE-SEM) and Atomic Force Microscopy (AFM) to analyze the morphology and surface roughness of the ZnO nanofilms and NRs.
  • X-ray Diffraction (XRD) to determine the crystalline structure of the ZnO materials.
  • A frequency counter to measure the output signal of the SAW sensors.

Ammonia sensing experiments were conducted in a sealed testing chamber (2000 mL) at a controlled room temperature (25 °C) and humidity (25%). Ammonia gas was introduced dynamically using a syringe, and the frequency shift of the SAW sensor was monitored. The study investigated responses to various ammonia concentrations (10-100 ppm) and evaluated sensor performance metrics such as response time, recovery time, sensitivity, stability, and reproducibility.

Datasets

Not discussed in the paper. The study utilized standard ammonia gas (2% purity) obtained from the National Institute of Testing Technology of China for sensing experiments.

Key Insights and Ideas

  • Seed-Layer-Free Hydrothermal Growth is Effective: The simplified hydrothermal method successfully produced ZnO NRs with a high surface-to-volume ratio, which is crucial for gas sensing. This approach offers a practical advantage over more complex multi-step methods.
  • Nanostructure Matters for Sensitivity: The ZnO NRs, with their significantly larger surface area compared to the ZnO nanofilm, exhibited a much higher sensitivity to ammonia. This is attributed to the increased availability of active sites for gas adsorption and reaction.
  • ST-Cut Quartz for Temperature Stability: The use of ST-cut quartz substrates is a key design choice, providing excellent temperature stability near room temperature. This allows for reliable room-temperature operation without the need for external temperature compensation, simplifying the sensor system.
  • Mechanism of Sensing: The sensing mechanism involves the adsorption of oxygen molecules onto the ZnO surface, forming a depletion layer. Upon exposure to ammonia, a reaction occurs between ammonia and oxygen, leading to the release of electrons and an increase in the ZnO layer's conductivity. This change in conductivity affects the SAW velocity and, consequently, the sensor's resonant frequency.

Key Results

  • Superior Sensitivity of ZnO NRs: The ZnO NR-based sensor showed a negative frequency shift of -1094 Hz for 100 ppm ammonia, which was approximately 3.6 times larger than the -307 Hz shift observed for the ZnO nanofilm sensor.
  • Faster Response (Initially) for NRs: While the nanofilm sensor reached 90% of its saturated value in 143 seconds, the NR sensor took 151 seconds. However, the NR sensor showed a much larger overall frequency shift.
  • Comparable Recovery Times: The 90% recovery time for the NR sensor was 568 seconds, compared to 426 seconds for the nanofilm sensor.
  • Linear Response and Higher Sensitivity Slope: The frequency shift of the NR sensor exhibited a more pronounced linear relationship with ammonia concentration, with a slope 3.8 times steeper than that of the nanofilm sensor.
  • Good Reproducibility: The ZnO NR sensor demonstrated good reproducibility, with a fluctuation in maximum frequency shift of less than 10% over four cycles, outperforming the nanofilm sensor's fluctuation of around 13%.
  • Long-Term Stability: Both sensors showed stable responses to various ammonia concentrations over a 60-day period, indicating good long-term operational stability.

Limitations and Future Work

  • Uneven NR Distribution: The paper notes that the distribution of ZnO NRs was uneven, and their growth was irregular. Further optimization of the growth process could lead to more uniform nanostructures.
  • Response Time for NRs: While the NR sensor showed higher sensitivity, its response time to reach 90% of saturation was slightly longer than the nanofilm sensor at 100 ppm. Future work could focus on optimizing NR morphology or surface functionalization to improve response speed.
  • Cross-Sensitivity: The paper does not extensively discuss the cross-sensitivity of the sensor to other gases. Investigating selectivity to ammonia over other common interfering gases would be a valuable next step.
  • Wireless Operation: While SAW sensors inherently support wireless capabilities, this specific implementation focused on wired measurements. Demonstrating wireless operation would further highlight the practical advantages.

Summary updated

BibTeX
@article{li2017room,
  author = {Wei Li and Yuanjun Guo and Yongliang Tang and Xiaotao Zu and Jinyi Ma and Lu Wang and Yongqing Fu},
  title = {{Room-Temperature Ammonia Sensor Based on ZnO Nanorods Deposited on ST-Cut Quartz Surface Acoustic Wave Devices}},
  journal = {Sensors},
  year = {2017},
  doi = {10.3390/s17051142},
}
Figure