Role of Li2O2@Li2CO3 Interfaces on Charge Transport in Nonaqueous Li–Air Batteries

Yedilfana Setarge Mekonnen, J. M. García‐Lastra, Jens S. Hummelshøj, Chengjun Jin, Tejs VeggeThe Journal of Physical Chemistry C 2015 · DOI

TL;DR

This paper investigates how the interface between lithium peroxide (Li₂O₂) and lithium carbonate (Li₂CO₃) affects charge transport in non-aqueous Li-O₂ batteries. The study reveals that these interfaces, often formed during battery operation, significantly hinder electron transport due to lithium vacancies, but may offer new pathways for electron polaron hopping, potentially improving battery performance.

What Problem Does This Paper Address?

Li-O₂ batteries hold immense promise for high energy density storage, far exceeding conventional Li-ion batteries. However, their practical application is hampered by issues like poor rechargeability and limited cyclability. A key factor contributing to these limitations is the formation of a cathode-electrolyte interface (CEI) layer, primarily composed of Li₂O₂ and Li₂CO₃, which impedes the movement of ions and electrons. While Li₂O₂ itself is known to have poor electronic conductivity, the specific role of the Li₂O₂@Li₂CO₃ interface in charge transport, especially under realistic operating conditions, has remained less understood. This paper aims to elucidate how these interfaces influence both ionic and electronic transport properties at the oxygen electrode, providing crucial insights for improving Li-O₂ battery performance.

Methods

The researchers employed a combination of advanced computational techniques:

  • Density Functional Theory with Hubbard U correction (DFT+U): This method is used to accurately describe the electronic structure and properties of materials, particularly those with localized electrons, like the oxygen and carbon atoms in Li₂O₂ and Li₂CO₃. The Hubbard U correction is essential for capturing the behavior of these electrons more realistically than standard DFT.
  • Non-Equilibrium Green's Function (NEGF) formalism: This technique is specifically applied to calculate the electronic transport properties of interfaces and nanostructures under an applied bias. It allows for the simulation of current flow across the Li₂O₂@Li₂CO₃ interface, providing insights into its conductivity.
  • Climbing Image Nudged Elastic Band (CI-NEB) method: This is a standard computational tool used to determine the minimum energy pathways and activation barriers for diffusion and hopping processes, such as lithium vacancy migration and polaron hopping.

These methods were used to model the crystal structures of Li₂O₂, Li₂CO₃, and their interface, as well as to investigate the behavior of lithium vacancies and polarons.

Datasets

Not discussed in the paper. The study relies on ab initio calculations based on established theoretical frameworks and material properties, rather than experimental datasets for training or evaluation.

Key Insights and Ideas

  • Lithium vacancies are detrimental to coherent electron transport: The study found that lithium vacancies tend to accumulate at the Li₂O₂ side of the Li₂O₂@Li₂CO₃ interface. These vacancies act as scattering centers, significantly reducing coherent electron transport by 2-3 orders of magnitude compared to pristine Li₂O₂. This is a major contributor to the poor conductivity observed in Li-O₂ batteries.
  • Interfaces can offer alternative charge transport pathways: Despite hindering coherent transport, the Li₂O₂@Li₂CO₃ interface can provide an alternative mechanism for charge transport through electron polaron hopping. Specifically, hopping within the peroxide layers of the interface shows low energy barriers, potentially improving electronic conductivity.
  • Asymmetric polaron transport: The interface exhibits diode-like behavior for polaronic transport. Hole polarons can move more easily from the Li₂CO₃ to the Li₂O₂ side, while electron polaron transport across the interface is significantly hindered.
  • Interface formation is thermodynamically favorable: The formation energies of lithium vacancies are lower at the Li₂O₂@Li₂CO₃ interface compared to the bulk materials, suggesting that vacancies will preferentially accumulate at the interface, further impacting transport.

Key Results

  • Coherent Electron Transport Reduction: The presence of Li vacancies at the Li₂O₂@Li₂CO₃ interface leads to a substantial decrease in coherent electron transport, reducing current densities by a factor of 2 compared to pristine Li₂O₂.
  • Electron Polaron Hopping: Low energy barriers (less than 0.5 eV) for electron polaron hopping are observed within the peroxide layers of the interface, suggesting an improved conduction channel compared to bulk Li₂O₂. The corresponding rates and diffusion coefficients indicate a potential for enhanced conductivity.
  • Hole Polaron Transport: Hole polaron hopping is more limited at the interface compared to bulk Li₂O₂, with barriers being at least twice as large. The interface acts as a diode, allowing hole polaron transport primarily from Li₂CO₃ to Li₂O₂.
  • Band Gaps: Pristine Li₂O₂ and Li₂CO₃ are wide bandgap insulators with calculated band gaps of 5.03 eV and 8.01 eV, respectively. The Li₂O₂@Li₂CO₃ interface shows a band gap of 4.82 eV, similar to pristine Li₂O₂, with no significant mid-gap interface states.

Limitations and Future Work

  • Experimental Verification: The authors acknowledge that creating such specific Li₂O₂@Li₂CO₃ interfaces experimentally can be challenging, and they are currently pursuing experimental work to explore this.
  • Nanostructured Cathodes: The findings suggest that exploiting these interface properties could lead to the design of nanostructured cathodes with improved conductivity. For instance, using carbon nanotubes grown on graphene, where Li₂CO₃ could spontaneously coat the nanotubes and Li₂O₂ fills the spaces during discharge, could create these beneficial interfaces.
  • Focus on Neutral Vacancies: The study primarily focused on neutral lithium vacancies. Further investigation into the role of charged vacancies (positive and negative) could provide a more complete picture.

Summary updated

Abstract

The formation and oxidation of the main discharge product in nonaqueous secondary Li–O2 batteries, that is, Li2O2, has been studied intensively, but less attention has been given to the formation of cathode–electrolyte interfaces, which can significantly influence the performance of the Li–O2 battery. Here we apply density functional theory with the Hubbard U correction (DFT+U) and nonequilibrium Green’s function (NEGF) methods to investigate the role of Li2O2@Li2CO3 interface layers on the ionic and electronic transport properties at the oxygen electrode. We show that, for example, lithium vacancies accumulate at the peroxide part of the interface during charge, reducing the coherent electron transport by two to three orders of magnitude compared with pristine Li2O2. During discharge, Li2O2@Li2CO3 interfaces may, however, provide an alternative in-plane channel for fast electron polaron hopping that could improve the electronic conductivity and ultimately increase the practical capacity in nonaqueous Li–O2 batteries.
BibTeX
@article{mekonnen2015role,
  author = {Yedilfana Setarge Mekonnen and J. M. García‐Lastra and Jens S. Hummelshøj and Chengjun Jin and Tejs Vegge},
  title = {{Role of Li<sub>2</sub>O<sub>2</sub>@Li<sub>2</sub>CO<sub>3</sub> Interfaces on Charge Transport in Nonaqueous Li–Air Batteries}},
  journal = {The Journal of Physical Chemistry C},
  year = {2015},
  doi = {10.1021/acs.jpcc.5b04432},
}
Figure