Rock and Fluid Property Changes and Environmental Risks in Heavy Oil In-Situ Combustion

Shibao Yuan, Zihan Ren, Yaoli Shi, Fengxiang Yang, Haiyan Jiang, Zhibing Shen, Jianbin Liu, Tianyue Li, Adilai Kuerban, Lehong LiEnergy 2025 · DOI

Abstract

During the in-situ combustion process for heavy oil recovery, reservoirs, minerals, and fluids are subjected to high temperatures, making it crucial to investigate the resulting secondary changes and potential environmental risks. This study focuses on thermally induced effects during in-situ combustion, analyzing the evolution of rock porosity, permeability, mineral composition, and particularly variations in produced fluid composition. A thermal-hydraulic-mechanical coupled numerical model was established to quantitatively evaluate the effects of high temperature and thermal stress on reservoir properties and fluid flow at the field scale. Additionally, risk points at different stages of the combustion process are identified, and corresponding mitigation measures are proposed. The results demonstrate that thermal stress induces pore-throat expansion and the generation of secondary cracks, especially above 450 °C. Furthermore, it triggers multiple mineral metamorphic processes at 550 °C, including the dissolution, breakage, dehydration, and transformation of feldspar. These combined effects enhance permeability by up to 9 times after in-situ combustion. Analysis of the produced fluids reveals a significant decrease by 2.5% in the content of resins and asphaltenes in the oil, accompanied by a reduction in the molecular weight of the crude oil. Conversely, the salinity and impurity contents in the produced water increase by approximately 1.73 times. The numerical model shows that thermal stress induces cracks in the rocks, increasing the average permeability by a factor of 3.7. However, high temperatures also cause feldspar and kaolinite to release a large amount of Al3+ into the formation water. When this Al3+-rich water mixes with suspended solids and total petroleum hydrocarbons from the oil phase, it may form a potentially hazardous fluid. Once these fluids migrate into groundwater through such cracks, they may cause significant environmental hazards. This study provides a theoretical foundation for the sustainable and environmentally responsible development of an in-situ combustion technology.
BibTeX
@inproceedings{yuan2025rock,
  author = {Shibao Yuan and Zihan Ren and Yaoli Shi and Fengxiang Yang and Haiyan Jiang and Zhibing Shen and Jianbin Liu and Tianyue Li and Adilai Kuerban and Lehong Li},
  title = {{Rock and Fluid Property Changes and Environmental Risks in Heavy Oil In-Situ Combustion}},
  booktitle = {Energy},
  year = {2025},
  doi = {10.1021/acs.energyfuels.5c05428},
}

Loading related content...

Figure