Robots that redesign themselves through kinematic self-destruction

Chen Yu, Sam KriegmanarXiv 2026 · DOI · arXiv

TL;DR

Researchers have developed a "universal controller" that allows robots to intentionally break off their own redundant or hindering body parts to improve locomotion. By treating robot control as a sequence modeling task, these robots can "sculpt" themselves from random initial assemblies into efficient movers, successfully generalizing to entirely new shapes in both simulation and the real world.

What Problem Does This Paper Address?

Traditionally, a robot’s "body plan" (its kinematic tree) is fixed at the factory or designed by an engineer before deployment. Even robots that claim to be "adaptive" usually only change their gait or the length of their limbs; they rarely change their fundamental structure.

This creates a rigid limitation: if a robot is deployed in a complex environment with a sub-optimal body, or if it suffers damage, it is stuck with that configuration. The authors address the challenge of self-design: how can a robot actively participate in its own structural design during its lifetime? They explore a biological strategy called autotomy (like a lizard shedding its tail) where the robot uses "kinematic self-destruction" to remove parts of itself that inhibit movement.

Methods

The researchers combined modular robotics with modern machine learning to create a robot that "sculpts" itself.

  • Hardware & Simulation: The robots are built from modular blocks. In the real world, these are joined by hot glue—strong enough to hold during walking, but breakable under high torque. In simulation (MuJoCo), this is modeled using "weld" constraints that snap when a specific torque threshold is reached.
  • The Universal Controller: Instead of a traditional control loop, the authors used a Causal Transformer. They framed robot control as a sequence modeling task (similar to how LLMs predict the next word). The model takes in a sequence of proprioceptive data (joint positions, velocities, and "connection status" of modules) and predicts the next motor action.
  • Self-Destruction Maneuver: The robot doesn't just fall apart; it identifies which modules are dead weight and executes a "thrashing" maneuver—repeatedly slamming the unwanted limb against the ground until the joint breaks.
  • Prompt Reset: To prevent the Transformer from getting stuck in "degenerate loops" (repetitive, frozen behaviors common in out-of-distribution states), the system monitors action variance. If the robot stops "trying" new things, the controller clears its short-term memory to force a fresh approach.
  • Sim-to-Real Grounding: To help the simulation-trained model work on physical hardware, the authors "injected" real-world sensor data from physical robot rollouts into the training dataset.

Datasets

  • Expert Trajectories: The model was initially trained on sensorimotor data from 8 hand-designed robot morphologies in simulation.
  • Out-of-Distribution (OOD) Test Set: To test generalization, the authors generated 100 randomly sampled morphologies that the model had never seen during training.
  • Real-World Validation: The system was tested on physical robots with both "in-distribution" shapes and entirely novel, OOD configurations.

Key Insights and Ideas

  • Reductive Adaptation is Powerful: While most research focuses on robots "growing" or adding parts, this paper proves that removing parts is a highly effective and simpler adaptive strategy. It’s easier to break a bad limb than to evolve a perfect one from scratch.
  • Proprioception is Enough: The robot doesn't need cameras to see its shape. By "feeling" the torque and its own movement, the Transformer can infer which parts of its body are helping and which are hurting.
  • Generalization via Sequence Modeling: By treating the robot's state as a string of tokens, a single "universal" policy can control a vast variety of body shapes. The model doesn't need to know the robot's "map" beforehand; it learns the map through interaction.

Key Results

  • Superior Speed: In simulation, robots allowed to self-destruct achieved a mean speed of 0.168 m/s, compared to only 0.080 m/s for robots with fixed bodies.
  • Generalization: The controller successfully redesigned and moved 100 different unseen robot shapes.
  • Real-World Success: Physical robots successfully identified redundant modules and broke them off within approximately 12 seconds.
  • Statistical Significance: Automatically chosen "self-destructions" led to significantly better locomotion than randomly removing modules ($p = 0.033$), proving the robot was making "smart" design choices.

Limitations and Future Work

  • Irreversibility: Kinematic self-destruction is a one-way street. Once a module is thrashed off, the robot cannot reattach it. This makes the "decision" to destruct high-stakes.
  • Glue Consistency: The authors noted that the manual application of hot glue leads to variations in joint strength, which can make the timing of the "break" unpredictable in reality compared to simulation.
  • Task Complexity: Currently, the reward function is focused solely on forward locomotion. Future work could explore how robots might shed parts to fit through narrow gaps or manipulate objects.
  • Scaling: The experiments were limited to robots with four modules. Scaling this to high-degree-of-freedom "soft" or "super-modular" robots remains an open challenge.

Summary updated

Abstract

Every robot built to date was predesigned by an external process, prior to deployment. Here we show a robot that actively participates in its own design during its lifetime. Starting from a randomly assembled body, and using only proprioceptive feedback, the robot dynamically ``sculpts'' itself into a new design through kinematic self-destruction: identifying redundant links within its body that inhibit its locomotion, and then thrashing those links against the surface until they break at the joint and fall off the body. It does so using a single autoregressive sequence model, a universal controller that learns in simulation when and how to simplify a robot's body through self-destruction and then adaptively controls the reduced morphology. The optimized policy successfully transfers to reality and generalizes to previously unseen kinematic trees, generating forward locomotion that is more effective than otherwise equivalent policies that randomly remove links or cannot remove any. This suggests that self-designing robots may be more successful than predesigned robots in some cases, and that kinematic self-destruction, though reductive and irreversible, could provide a general adaptive strategy for a wide range of robots.
BibTeX
@misc{yu2026robots,
  author = {Chen Yu and Sam Kriegman},
  title = {{Robots that redesign themselves through kinematic self-destruction}},
  year = {2026},
  eprint = {2603.12505},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2603.12505},
}
Figure