Revealing Crack Propagation and Mechanical Behavior of Corroded Aluminum Alloys

Yong Zhang, Andong Wang, Qihong Fang, Wenfei Yang, Weijie Fan, Jia LiSymmetry 2024 · DOI

TL;DR

This paper uses molecular dynamics simulations to investigate how corrosion affects the mechanical properties and crack propagation in aluminum alloys. The study reveals that corrosion depth and width significantly influence yield strength and crack behavior, offering insights for designing more durable aluminum alloys.

What Problem Does This Paper Address?

Corrosion is a major threat to the integrity and lifespan of engineering structures, particularly in harsh environments like marine settings. Aluminum alloys are widely used due to their high strength-to-weight ratio, but their susceptibility to corrosion can lead to stress concentration and premature failure. While previous research has explored macroscopic crack propagation and corrosion prevention, there's a significant gap in understanding the atomic-scale mechanisms by which corroded surfaces influence the mechanical behavior and crack propagation of aluminum alloys. This lack of detailed understanding hinders the development of more robust and corrosion-resistant aluminum alloys.

Methods

The researchers employed molecular dynamics (MD) simulations to investigate the crack propagation and mechanical behavior of aluminum alloys. They created atomic models of aluminum alloys with varying degrees of single-sided corrosion, simulating mode I crack propagation under tensile loading. The simulations utilized the embedded-atom method (EAM) interatomic potentials for Al-Cu interactions. The LAMMPS software was used for the simulations, and OVITO was used for post-processing and visualization. They systematically varied corrosion depth (0.5 nm, 1 nm, 2 nm) and width (0.8 nm, 1.2 nm, 2 nm, 4 nm) to analyze their impact on stress-strain curves, microstructure evolution, strain distribution, and stress distribution.

Datasets

Not discussed in the paper. The study relies on simulated atomic models rather than experimental datasets for training or evaluation.

Key Insights and Ideas

  • Corrosion depth has a complex effect on yield strength: Initially, increasing corrosion depth decreases yield strength, but then it increases again, peaking at a certain depth. This is attributed to the "healing" of surface roughness at deeper corrosion levels, which alters the local microstructure and stress distribution.
  • Corrosion pits are key regulators of microstructure: The presence of corrosion pits significantly influences how the local microstructure evolves, leading to localized stress concentrations and dictating the crack propagation path.
  • Corrosion width impacts strength beyond the elastic limit: While corrosion width has a minimal effect on the elastic modulus, it significantly alters the yield strength and subsequent plastic behavior.
  • Transition from brittle to ductile behavior: The study observed that corrosion can lead to a transition from brittle to ductile fracture behavior, effectively halting further crack propagation and enhancing the material's resistance to cracking. This is linked to the formation of local amorphous zones and plastic deformation.
  • Limitations of macroscopic understanding: The research highlights that macroscopic assumptions about material properties are insufficient to fully understand atomic-scale corrosion crack propagation mechanisms.

Key Results

  • Yield Strength Trend: Yield strength initially decreases with increasing corrosion depth, then increases, peaking at a corrosion depth of 3 nm.
  • Microstructure Evolution: Corrosion leads to the formation of localized plastic regions, distinct dislocation channel regions, amorphous structures, stacking faults, and deformation twins near the crack tip.
  • Strain and Stress Distribution: Larger corrosion depths and widths result in more pronounced high strain areas and higher stress concentrations, particularly in shear bands, indicating a less stable crystal state and increased likelihood of crack propagation.
  • Crack Path Influence: Corrosion width influences the direction of strain-shear band expansion, suggesting a significant role in shaping crack propagation.

Limitations and Future Work

The authors acknowledge that the current study focuses on mode I crack propagation and that mode II and mixed-mode I-II crack propagation will be explored in future work due to their complexity. They also note that the size limitations of atomic simulations necessitate the development of analytical models that combine experimental and simulation results. Future research should further investigate the effect of corrosion environment on mechanical properties and the synergistic microstructure evolution mechanism of polycrystalline aluminum alloys. Additionally, the impact of corrosion-induced material composition changes on mechanical properties should be considered.

Summary updated

BibTeX
@article{zhang2024revealing,
  author = {Yong Zhang and Andong Wang and Qihong Fang and Wenfei Yang and Weijie Fan and Jia Li},
  title = {{Revealing Crack Propagation and Mechanical Behavior of Corroded Aluminum Alloys}},
  journal = {Symmetry},
  year = {2024},
  doi = {10.3390/sym16040422},
}
Figure