Resource-Efficient Beam Prediction in mmWave Communications with Multimodal Realistic Simulation Framework

Yu Min Park, Yan Kyaw Tun, Walid Saad, Choong Seon HongarXiv 2025 · DOI · arXiv

Introduction

Millimeter-wave (mmWave) communications are a cornerstone of 5G and 6G networks, providing the high bandwidth necessary for modern applications. However, the high path loss of mmWave frequencies necessitates the use of directional beamforming. Maintaining alignment between a base station and fast-moving vehicles—known as beam prediction—is a significant challenge in dynamic urban environments. Traditional beam sweeping methods are often too slow and resource-intensive for real-time operation.

Problem Statement

While deep learning models using multimodal data (LiDAR, cameras, GPS) have shown promise in predicting optimal beams, they face practical deployment hurdles:

  1. Cost and Privacy: High-resolution sensors are expensive to deploy at every base station and raise significant privacy concerns.
  2. Computational Complexity: Multimodal models, often based on heavy Transformer architectures, are difficult to run in real-time on edge devices.
  3. Data Scarcity: There is a lack of comprehensive datasets that combine diverse sensor modalities with realistic mmWave channel modeling.

Proposed Methodology

1. Realistic Simulation Framework

To address the data gap, the authors developed a "digital twin" simulation framework. By integrating the CARLA autonomous driving simulator with MATLAB’s ray-tracing toolbox, they generated a dataset that reflects both realistic physical traffic environments and accurate wireless propagation physics (including path loss, reflections, and diffractions).

The integrated simulation framework combining CARLA for physical environments and MATLAB for wireless propagation.

The authors used the 'Town 10' map in CARLA to simulate various urban road configurations under diverse weather (rain, fog) and lighting conditions. The resulting dataset comprises approximately 18,800 synchronized samples of LiDAR, Radar, GPS, and RGB data paired with ray-tracing-based channel information.

2. Cross-modal Relational Knowledge Distillation (CRKD)

The core innovation is a Teacher-Student architecture designed to transfer knowledge from a complex multimodal model to a lightweight, radar-only model.

  • Teacher Model: A large Transformer-based network (105M parameters) utilizing LiDAR, Radar, GPS, and RGB camera data.
  • Student Model: A resource-efficient Multi-Layer Perceptron (13M parameters) that operates solely on Radar data.
Overview of the Cross-modal Relational Knowledge Distillation (CRKD) framework.

The CRKD algorithm goes beyond standard distillation by forcing the student to learn the relational structures perceived by the teacher. This includes aligning latent space representations across Euclidean, Spherical, and Hyperbolic manifolds. Additionally, a domain-specific "Beam Steering-Based Relationship" loss is used to teach the student the underlying spatial geometry of the beamspace.

Key Results and Insights

The proposed framework demonstrates that a radar-only model can achieve high performance by inheriting spatial awareness from a multimodal teacher:

  • Accuracy: The student model reached 94.62% of the teacher's accuracy.
  • Efficiency: The student uses only 10% of the parameters (13M vs 105M) and significantly fewer FLOPs (13.6M vs 20.3G).
  • Latency: Inference time is reduced to 0.6ms – 1ms, making it over 30 times faster than standard 5G NR beam sweeping (~20ms).
  • Geometry Matters: The use of hyperbolic manifolds proved effective in capturing the hierarchical nature of sensor data, while beam-aware distillation ensured the model remained grounded in communication physics.

Conclusion and Future Work

This research provides a path toward low-cost, privacy-preserving, and real-time beam prediction for mmWave networks. While the current model shows some sensitivity to environment changes (domain shift), future work will focus on domain adaptation techniques to improve generalization across different urban layouts. The team also intends to expand the simulation framework to include more complex mobility scenarios, such as aerial drones.

Summary updated

Abstract

Beamforming is a key technology in millimeter-wave (mmWave) communications that improves signal transmission by optimizing directionality and intensity. However, conventional channel estimation methods, such as pilot signals or beam sweeping, often fail to adapt to rapidly changing communication environments. To address this limitation, multimodal sensing-aided beam prediction has gained significant attention, using various sensing data from devices such as LiDAR, radar, GPS, and RGB images to predict user locations or network conditions. Despite its promising potential, the adoption of multimodal sensing-aided beam prediction is hindered by high computational complexity, high costs, and limited datasets. Thus, in this paper, a novel resource-efficient learning framework is introduced for beam prediction, which leverages a custom-designed cross-modal relational knowledge distillation (CRKD) algorithm specifically tailored for beam prediction tasks, to transfer knowledge from a multimodal network to a radar-only student model, achieving high accuracy with reduced computational cost. To enable multimodal learning with realistic data, a novel multimodal simulation framework is developed while integrating sensor data generated from the autonomous driving simulator CARLA with MATLAB-based mmWave channel modeling, and reflecting real-world conditions. The proposed CRKD achieves its objective by distilling relational information across different feature spaces, which enhances beam prediction performance without relying on expensive sensor data. Simulation results demonstrate that CRKD efficiently distills multimodal knowledge, allowing a radar-only model to achieve $94.62%$ of the teacher performance. In particular, this is achieved with just $10%$ of the teacher network's parameters, thereby significantly reducing computational complexity and dependence on multimodal sensor data.
BibTeX
@misc{park2025resource,
  author = {Yu Min Park and Yan Kyaw Tun and Walid Saad and Choong Seon Hong},
  title = {{Resource-Efficient Beam Prediction in mmWave Communications with Multimodal Realistic Simulation Framework}},
  year = {2025},
  eprint = {2504.05187},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2504.05187},
}
Figure