TL;DR
This study investigates the reservoir characteristics of organic-rich siliceous shale from the Upper Permian Dalong Formation in western Hubei, revealing that despite high organic matter content, poor physical properties are linked to siliceous cementation and clay mineral-induced compaction. Understanding these factors is crucial for assessing shale gas potential in this region.
What Problem Does This Paper Address?
The exploration and development of shale gas resources are gaining significant traction globally, with China making notable progress. While the Longmaxi Formation in the Sichuan Basin has seen commercial success, other regions like western Hubei, specifically the Upper Permian Dalong Formation, are also targeted for their potential. However, previous research indicated that the Dalong Formation's siliceous shale exhibits low total porosity and poor reservoir properties, contrasting with the high porosity observed in the Longmaxi Formation. This discrepancy, coupled with an unusual correlation between organic matter, clay minerals, and quartz content, highlights a knowledge gap. This paper aims to address this by thoroughly characterizing the reservoir properties of the Dalong Formation's siliceous shale and identifying the key factors controlling its pore structure and overall reservoir quality.
Methods
The researchers employed a multi-faceted approach to analyze drilling cores from Well ED-2. Key techniques included:
- Mineral Composition Analysis: X-ray Diffraction (XRD) was used to determine the abundance of various minerals like quartz, feldspar, calcite, dolomite, clay minerals, pyrite, and hematite.
- Organic Geochemistry: Total Organic Carbon (TOC) content was measured, and vitrinite reflectance (Ro) was used to assess the thermal maturity of the organic matter. Microscopic identification of kerogen macerals was also performed.
- Porosity and Pore Structure Analysis:
- Total Porosity: Measured using a KXD-II porosity and permeability joint tester.
- Pore Structure Characterization: Field Emission Scanning Electron Microscopy (FE-SEM) was utilized for visual observation of pore types and morphology. Low-pressure CO2 and N2 physical adsorption tests were conducted to quantitatively analyze pore structure parameters such as pore volume and specific surface area, employing NLDFT and BJH models.
Datasets
The study utilized drilling core samples from Well ED-2 in the Upper Permian Dalong Formation, western Hubei, China. A total of 26 samples were collected from depths ranging from 1215.9 m to 1252.95 m. These samples formed the basis for all analyses. No new benchmark datasets were introduced.
Key Insights and Ideas
- Siliceous Cementation as a Pore Blocker: The presence of secondary quartz, likely formed from hydrothermal fluids, acts as a significant pore-filling agent, reducing intergranular pore volume and overall porosity. This explains the weak negative correlation between quartz content and porosity.
- Clay Minerals' Dual Role: While clay minerals positively correlate with pore volume and specific surface area, they also contribute to poor reservoir properties by reducing the shale's resistance to compaction.
- Organic Matter Pores Dominate, but Compaction is Key: Organic matter pores, particularly micropores and mesopores formed from solid asphalt after hydrocarbon generation, are well-developed. However, in shales with high clay content and thus lower brittle mineral content, compaction can destroy these larger pores, leaving behind a network of smaller pores.
- Dalong vs. Longmaxi Shale Differences: The Dalong Formation's shale exhibits a distinct pore structure and mineralogical control on reservoir properties compared to the Longmaxi Formation, which has higher porosity and a different correlation between quartz and organic matter.
Key Results
- The Dalong Formation's shale is characterized as organic-rich siliceous shale with an average TOC of 6.66% and high quartz content (average 62.2%).
- Organic matter maturity is high, with Ro ranging from 2.56% to 2.79%, indicating an overmature dry gas stage. The dominant organic matter type is sapropelic.
- Total porosity is low (average 3.13%), with a weak negative correlation with quartz content.
- Micropores and mesopores are the dominant pore types, contributing significantly to pore volume (68.9% and 23.5% respectively) and specific surface area (61.2% and 38.6% respectively). Macropores are scarce.
- Pore volume and specific surface area show positive correlations with clay minerals and organic matter content, but a weak negative correlation with quartz.
- Two main factors contribute to poor reservoir properties: siliceous cementation by hydrothermal fluids and compaction due to low brittle mineral content in clay-rich shales.
Limitations and Future Work
The study focuses on a single well (ED-2) and a specific geological formation. While the findings provide valuable insights, the authors suggest that further research across a broader range of wells and formations within the Dalong Formation would be beneficial to confirm these trends and fully understand the regional variability. Additionally, more detailed investigations into the specific mechanisms of hydrothermal siliceous cementation and the precise impact of compaction on different pore types could further refine reservoir characterization.
Summary updated