Research Progress of Horizontal Cavity Surface-Emitting Laser

Jishun Liu, Yue Song, Yongyi Chen, Li Qin, Lei Liang, Shen Niu, Ye Wang, Peng Jia, Cheng Qiu, Yuxin Lei, Yubing Wang, Yongqiang Ning, Lijun Wang2023 · DOI

TL;DR

This review paper provides a comprehensive overview of the latest advancements in Horizontal Cavity Surface-Emitting Lasers (HCSELs). It highlights how HCSELs overcome the limitations of traditional edge-emitting lasers, offering high power, excellent beam quality, and ease of integration, making them crucial for future applications in various industries.

What Problem Does This Paper Address?

Traditional edge-emitting semiconductor lasers, while widely used, suffer from significant drawbacks such as a large divergence angle, susceptibility to cavity surface damage, and poor monochromaticity. These issues necessitate complex and costly external optics for beam shaping and collimation, limiting their application in scenarios demanding high beam quality. While Vertical Cavity Surface-Emitting Lasers (VCSELs) offer improvements like no cavity surface catastrophe damage and easy 2D integration, their thin active region limits output power. This paper addresses the need for semiconductor lasers that combine high power, excellent beam quality, and efficient integration, a need that Horizontal Cavity Surface-Emitting Lasers (HCSELs) are well-positioned to meet.

Methods

The paper reviews three primary approaches for achieving high-power HCSELs:

  • Grating Diffraction: This method utilizes a distributed feedback (DFB) grating structure to diffract the laser light from a horizontal to a vertical direction, enabling surface emission. Second-order gratings are commonly employed, where one order is used for output coupling and another for optical feedback and mode selection, leading to single longitudinal mode operation.
  • Photonic Crystal Diffraction Structure: This approach leverages the unique properties of photonic crystals, specifically their band-edge modes and periodic dielectric constants, to achieve surface light emission. These structures act as two-dimensional gratings, facilitating stimulated emission amplification and surface emission.
  • Mirror-Type: These HCSELs incorporate a steering mirror onto the photonic chip, often with an etched grating structure above the active layer. A 45° reflector redirects the light path horizontally to achieve surface emission. The quality of this reflector is critical for output power.

The paper also discusses advancements in materials, including perovskites and organic semiconductors, and novel structures like topological cavities and open-Dirac cavities, to further enhance HCSEL performance.

Datasets

Not discussed in the paper.

Key Insights and Ideas

  • HCSELs as a Superior Alternative: HCSELs fundamentally address the divergence angle problem of edge-emitting lasers and offer higher power potential than VCSELs due to their thicker active regions and robust cavity structures.
  • Grating Engineering is Key: The precise design and fabrication of gratings (second-order, curved, or high-order) are crucial for achieving efficient surface emission, mode selection, and high output power in SE-DFB lasers.
  • Photonic Crystals Offer Unique Control: Photonic crystals provide a novel way to control light propagation and achieve surface emission by manipulating band-edge modes and lattice symmetry, enabling large-area, high-quality beams.
  • Material Innovation Drives Progress: The exploration of new materials like perovskites and organic semiconductors, along with advanced fabrication techniques like nanoimprint lithography, is paving the way for lower-threshold and more cost-effective HCSELs.
  • Thermal Management is Critical for High Power: For high-power HCSELs, effective thermal management systems are essential to maintain device performance and longevity.

Key Results

The paper highlights numerous research achievements, including:

  • High Output Powers: Devices have demonstrated continuous wave (CW) output powers reaching up to 29 W (dual-lattice photonic crystal laser) and peak pulsed powers exceeding 300 W (curved second-order grating SE-DFB laser).
  • Excellent Beam Quality: HCSELs consistently achieve narrow divergence angles, often less than 0.4°, and single-lobe beam profiles, significantly outperforming traditional edge-emitters.
  • Improved Efficiency: Slope efficiencies have been reported as high as 993 mW/A for THz QCLs and 0.8 W/A for other HCSEL types.
  • Advanced Structures: Innovations like topological cavities and open-Dirac cavities are enabling single-mode lasing over large areas with tunable mode diameters.

Limitations and Future Work

The paper acknowledges several limitations and suggests future research directions:

  • Manufacturing Complexity: While promising, the fabrication of some HCSEL structures, particularly mirror-type HCSELs and photonic crystal devices, can be complex and costly.
  • Cost Reduction: A significant challenge remains in reducing the manufacturing costs of HCSELs to make them more accessible for widespread adoption.
  • Further Performance Enhancement: Future work should focus on expanding chip areas, improving surface coupling efficiency (e.g., through buried gratings), suppressing higher-order modes, and further increasing output power.
  • Broader Applications: The development of high-power, high-beam-quality HCSELs is crucial for expanding their applications in fields such as material processing, laser medicine, non-linear optics, and optical communication. The authors anticipate the emergence of high-power cavity laser light sources with exceptional beam quality and slope efficiency.

Summary updated

BibTeX
@misc{liu2023research,
  author = {Jishun Liu and Yue Song and Yongyi Chen and Li Qin and Lei Liang and Shen Niu and Ye Wang and Peng Jia and Cheng Qiu and Yuxin Lei and Yubing Wang and Yongqiang Ning and Lijun Wang},
  title = {{Research Progress of Horizontal Cavity Surface-Emitting Laser}},
  year = {2023},
  doi = {10.3390/s23115021},
}

Loading related content...

Figure