Research on the Treatment for Cyanide-containing Wastewater by High Voltage Pulsed Corona Discharge

Shengli LiIndustrial 2010

Abstract

Laboratory tests is conducted for the removal of cyanide wastewater from blast furnace by pulsed corona discharge.A new kind of reactor with needle-needle electrode is designed for this research.Tests are conducted under the following conditions: without and with the introduction of SO2,without discharge and discharge,and different initial cyanide content of wastewater from blast furnace.Multiplied experimental results indicates that the introduction of SO2 can greatly enhance the removal ratio of cyanide,no matter whether with discharge or not;meanwhile,the results demonstrates that pulsed corona discharge can enhance the removal ratio of cyanide,and the more residence time of wastewater in the corona area,the higher the removal ratio;in addition,the higher the inlet content of cyanide,the better the removal effect,the removal rate can reach 99.9% with a residence time of 2.1 s in the pulsed corona zone during the desulphurization process when the inlet content is higher,but there the removal effect is not better when the inlet content is lower.
BibTeX
@inproceedings{li2010research,
  author = {Shengli Li},
  title = {{Research on the Treatment for Cyanide-containing Wastewater by High Voltage Pulsed Corona Discharge}},
  booktitle = {Industrial},
  year = {2010},
}

Loading related content...

Figure