Research on the reliability model of the water-entry process of air-launched vehicle under the simulation environment of numerical wave tank

Nuo Zhao, Chen Lü, Huaping Liu2015 · DOI

Abstract

The high cost of reliability testing for the water-entry process of air-launched vehicles has led to the adoption of numerical simulation as a primary development tool. This paper integrates vehicle failure mechanism simulation with mission reliability calculations under complex wave conditions. By establishing a numerical wave tank and utilizing Computational Fluid Dynamics (CFD), the study derives response models for Attitude Angle, Angular Velocity, and Centroid Displacement via least squares fitting. These models serve as critical inputs for reliability analysis, providing a structured framework for evaluating vehicle performance in diverse sea states.

Introduction

Testing the reliability of air-launched vehicles, such as torpedoes or sensor buoys, during the violent transition from air to water is a significant engineering challenge. Physical sea trials are prohibitively expensive, difficult to instrument, and constrained by unpredictable weather conditions. While numerical simulations are standard, many existing models fail to account for the complex coupling of environmental factors, such as moving waves at varying phases and angles. This research bridges the gap between raw fluid dynamics data and mission-level reliability analysis by creating a model that incorporates these real-world variables.

Methodology

The research utilizes a multi-step simulation and mathematical fitting approach to build a high-fidelity reliability model.

Numerical Wave Tank (NWT)

A virtual testing environment measuring 100m x 25m x 35m was established using CFD. To accurately capture the "slamming" effect—the intense pressure spike at the moment of impact—an extremely fine mesh of 2.3 million grid points was implemented around the vehicle.

The refined mesh around the vehicle used in the CFD simulation to capture high-frequency slamming effects.

Simulation Matrix and Environmental Variables

The study executed 10 distinct simulation schemes, varying the sea state (3rd to 5th level), wave phases (0° to 270°), and water-entry angles (30° and 60°). These environmental factors were simplified into dimensionless variables to allow for broader model application without redundant CFD runs.

Least Squares Fitting

The core of the methodology involves using least squares fitting to derive mathematical response models from the CFD data. These equations predict three critical parameters: Attitude Angle (θ), Angular Velocity, and Centroid Displacement. These response models are then integrated into a reliability framework that combines probabilistic and non-probabilistic methods.

Results and Discussion

The simulation results provided deep insights into the vehicle's behavior during water entry.

The Slamming Factor and Attitude Stability

The moment of water entry induces significant fluctuations in attitude and angular velocity due to the slamming force. While the general trajectory remains predictable, these micro-fluctuations are critical for reliability. The fitting curves for Attitude Angle show consistent trends with the raw simulation data, although deviations occur during the peak impact period.

Comparison between CFD simulation results and the derived fitting curve for the attitude angle under 3rd level sea conditions at a 0° wave phase.

Displacement Stability

In contrast to rotational parameters, Centroid Displacement proved remarkably stable. The fitting curves for displacement showed an almost complete overlap with simulation data, validating the model's spatial accuracy across different sea conditions.

Conclusion

This study successfully developed a structured reliability model for air-launched vehicles in complex wave environments. By fitting CFD simulation results into mathematical response models, the authors provided a robust tool for reliability analysis that reduces the need for physical testing. Future work will focus on refining the fitting equations to better capture the high-frequency oscillations caused by initial slamming forces and extending the model to cover the full underwater trajectory phase.

Summary updated

Abstract

The high cost of the reliability test for water-entry process of air-launched vehicle prompts the numerical simulation method which has become a mainstream in the process of equipment development. In this paper, the author integrated the simulation results of vehicle failure mechanism with the calculation of mission reliability of water-entry vehicle through the model research of water-entry process of air-launched vehicle under the condition of complex wave, and structured water-entry vehicle reliability model under complex wave condition, based on failure mechanism simulation environment. Furthermore, based on the basic flow field data obtained from CFD simulation, the author gained the movement parameters models on Attitude Angle, Angular Velocity and Centroid Displacement of the water-entry process of air-launched vehicle through the least squares fitting, which provides the basic input data for the reliability analysis of the vehicle water-entry process. In the end, the author fitted simulation results into the reliability model, and presented the reliability analysis result according to the fitting results of Attitude Angle, Angular Velocity and Centroid Displacement.
BibTeX
@misc{zhao2015research,
  author = {Nuo Zhao and Chen Lü and Huaping Liu},
  title = {{Research on the reliability model of the water-entry process of air-launched vehicle under the simulation environment of numerical wave tank}},
  year = {2015},
  doi = {10.2991/ic3me-15.2015.250},
}

Loading related content...

Figure