Research on the Mechanisms and Influencing Factors of Sediment Accumulation in Mountain Tunnel Drainage Trenches

Yichen Peng, Jinhui Jing, Y.b. Yang, Shuai Yang, Hongyu Wu, Yangqi Xiang, Delei Jing, Hongshan YinApplied Sciences 2026 · DOI

TL;DR

This study investigates sediment accumulation in mountain tunnel drainage trenches, a critical issue for operational safety. By combining full-scale experiments and CFD simulations, the research identifies key factors influencing sediment buildup and proposes optimized trench designs and operational strategies to enhance anti-sedimentation capabilities.

What Problem Does This Paper Address?

Mountain tunnel drainage systems are prone to sediment accumulation, which can lead to blockages and jeopardize operational safety. While mineral crystallization clogging is well-studied, the deposition of debris from groundwater erosion and water flow remains a complex challenge. Existing research often focuses on single factors, leaving a gap in understanding how multiple factors interact to influence sedimentation. This paper aims to fill that gap by systematically analyzing the coupled effects of sediment concentration, flow rate, slope, and cross-sectional shape on sediment deposition in drainage trenches.

Methods

The research employs a multi-pronged approach:

  • Full-Scale Experiments: A dedicated simulation platform was constructed to mimic tunnel drainage trench operations. This involved testing various combinations of sediment concentrations (1.0-10.0 kg/m³), water flow rates (0.22, 0.67, 1.33 m³/h), and longitudinal slopes (1%, 2%, 3%). Two primary cross-sectional shapes, rectangular and semi-circular, were initially tested, with subsequent analysis incorporating narrow rectangular and inverted trapezoidal shapes. Sediment accumulation was measured by collecting and weighing dried sediment.
  • Numerical Simulations (CFD): The ANSYS FLUENT software was used to simulate sediment transport using the Eulerian multiphase flow model. This allowed for detailed analysis of flow field characteristics and deposition patterns under different cross-sectional geometries (rectangular, semi-circular, narrow rectangular, and inverted trapezoidal). The Standard k-epsilon turbulence model was selected for its robustness in simulating free-surface multiphase flows.

Datasets

The study utilized data generated from its own experimental setup. No external datasets were used for training or evaluation. The experimental conditions were systematically varied to cover a range of relevant parameters, creating a unique dataset for this research.

Key Insights and Ideas

  • Synergistic Effects: Sediment accumulation isn't driven by a single factor but by the complex interplay of sediment concentration, flow rate, slope, and trench geometry.
  • Flow Rate as a Dominant Factor (Above Threshold): While sediment concentration directly increases accumulation, higher flow rates can significantly mitigate this effect, especially once a critical threshold is reached. This suggests a "flow-driven sediment removal" phenomenon.
  • Slope's Crucial Role: Increasing the longitudinal slope dramatically reduces sediment accumulation, particularly at higher flow rates, potentially leading to a "zero accumulation" state.
  • Geometry Matters: The shape of the drainage trench is critical. Narrower bottoms and more efficient hydraulic radii (like in semi-circular and narrow rectangular designs) enhance flow velocity and anti-sedimentation capacity.
  • Trade-offs in Design: There's a fundamental trade-off between flood discharge capacity (favored by wider trenches) and anti-sedimentation efficiency (favored by narrower trenches and higher velocities).

Key Results

  • Sediment Concentration: Sediment accumulation is linearly positively correlated with sediment concentration (slope of 0.87) and exponentially negatively correlated with flow rate and slope (R² > 0.90).
  • Flow Rate and Slope Impact: At higher flow rates, the influence of sediment concentration diminishes, and slope and flow rate become dominant. A 3% slope and 1.33 m³/h flow rate can achieve near-zero sediment accumulation.
  • Cross-Sectional Performance: Under identical conditions, the anti-sedimentation capacity ranks as: narrow rectangular > semi-circular ≈ inverted trapezoidal > rectangular. This is linked to flow velocity, with narrow rectangular trenches exhibiting the highest maximum flow velocities.
  • CFD Validation: The CFD model successfully reproduced observed deposition patterns ("scouring in the center and deposition near the sidewalls"), validating its accuracy for predicting sediment transport.

Limitations and Future Work

  • Steady-State vs. Episodic Supply: The experiments used a quasi-steady sediment input, which may not fully capture the dynamic behavior of sediment transport during rapid, episodic storm events with fluctuating concentrations. Future work could explore these transient conditions.
  • Bulk Mass vs. Size-Selective Transport: The study focused on the bulk mass of sediment. Future research should investigate size-selective transport and armoring effects, as particle size segregation can significantly influence clogging mechanisms.
  • Numerical Model Simplification: The Eulerian multiphase model treated sediment as a continuous phase, simplifying particle-particle interactions. While effective for macroscopic trends, it may not predict microscopic behaviors like ripple formation. Future work could explore more detailed particle-based models.
  • Operational Strategies: The paper proposes a "periodic concentrated discharge" strategy. While promising, its potential risks (hydraulic overloading, scouring) require thorough assessment.

The study provides valuable insights for optimizing tunnel drainage trench design and maintenance, offering a quantitative basis for selecting appropriate cross-sections and implementing effective anti-sedimentation strategies.

Summary updated

Abstract

Sediment accumulation in the drainage systems of mountain tunnels is a typical issue threatening operational safety. To explore the sedimentation behavior under the coupling of multiple factors, this study systematically analyzes the coupled effects of sediment content, flow rate, slope, and cross-sectional shape on sedimentation through full-scale experiments and numerical simulations. The results indicate that: (1) the sediment accumulation is linearly positively correlated with sediment concentration (fitting slope of 0.87) and exponentially negatively correlated with flow rate and slope (R2 > 0.90); (2) for drainage trenches with different cross-sectional shapes under the same boundary conditions, the maximum flow velocity and anti-sedimentation capacity rank as narrow rectangular > semi-circular ≈ inverted trapezoidal > rectangular; (3) the study proposes engineering anti-sedimentation strategies, such as moderately increasing the slope and adopting a periodic concentrated discharge model to enhance sediment transport capacity using peak flow; (4) under the premise of meeting drainage and flood control standards, the inverted trapezoidal or semi-circular cross-sections are preferred. The bottom waterway width can be reduced to increase flow velocity, thereby achieving a synergistic optimization of drainage efficiency and operational reliability. This provides a quantitative basis for the structural selection and anti-sedimentation design of tunnel drainage systems.
BibTeX
@inproceedings{peng2026research,
  author = {Yichen Peng and Jinhui Jing and Y.B. Yang and Shuai Yang and Hongyu Wu and Yangqi Xiang and Delei Jing and Hongshan Yin},
  title = {{Research on the Mechanisms and Influencing Factors of Sediment Accumulation in Mountain Tunnel Drainage Trenches}},
  booktitle = {Applied Sciences},
  year = {2026},
  doi = {10.3390/app16041758},
}
Figure