Research on the Mechanism of Fabricating Hierarchical Microstructured Hydrophobic Surfaces via Laser Ablation Imprinting

Genyi Li, Pin Li, Rui Zhang, Haoran Sun, Zheng Shi, Zongbao ShenMetals 2026 · DOI

TL;DR

This paper introduces a novel "laser ablation imprinting" technique to create hierarchical microstructures on aluminum foil, leading to superhydrophobic surfaces. By combining laser shock imprinting with material splashing effects, they achieve efficient fabrication. Subsequent aging and fluorination treatments further enhance hydrophobicity by modifying surface chemistry without altering the micro-architecture.

What Problem Does This Paper Address?

Creating superhydrophobic surfaces is crucial for applications like corrosion resistance, oil-water separation, and friction reduction. Existing methods for fabricating the necessary micro- and nano-scale surface structures can be complex, costly, or inefficient. Specifically, achieving hierarchical structures (structures within structures) that amplify hydrophobicity is challenging. This paper tackles the need for a more efficient and cost-effective method to create these complex surfaces, focusing on understanding the underlying mechanisms of a new technique called "laser ablation imprinting."

Methods

The core of this research is the laser ablation imprinting technique. This method combines two laser-based processes:

  1. Laser Shock Imprinting: Laser pulses create plasma shock waves that imprint primary microstructures from a mold onto the workpiece.
  2. Material Splashing Effect: The laser ablation process itself causes material to splash and redeposit, forming secondary microstructures on top of the primary ones, thus creating a hierarchical structure.

The researchers systematically investigated the influence of key process parameters:

  • Number of laser shocks: Varied from 1 to 5.
  • Laser fluence: Tested across a range from 19.1 to 76.39 J/cm².
  • Mold period: Used molds with periods of 80, 120, 160, and 200 µm.

After fabricating the microstructures, two post-processing treatments were applied to enhance hydrophobicity:

  • Aging Treatment: Samples were exposed to ambient air for up to 28 days.
  • Fluorination Treatment: Samples were immersed in a solution containing perfluorodecyltriethoxysilane.

Characterization techniques included:

  • Scanning Electron Microscopy (SEM) and Ultra-Depth Microscopy for surface morphology and 3D topography.
  • Energy-Dispersive X-ray Spectroscopy (EDS) for elemental composition.
  • X-ray Photoelectron Spectroscopy (XPS) for chemical state analysis.
  • Optical Contact Angle Goniometry to measure wettability.

Datasets

Not discussed in the paper. The study relies on experimental fabrication and characterization of aluminum foil samples.

Key Insights and Ideas

  • Synergistic Hierarchical Structure Formation: The "laser ablation imprinting" method ingeniously uses both the direct imprinting force of laser shock waves and the secondary material splashing effect to create complex, hierarchical microstructures in a single process.
  • Mechanism of Secondary Structure Formation: The paper elucidates how material splashing, driven by plasma expansion and condensation, forms the secondary microstructures, contributing to the overall hierarchical architecture.
  • Surface Chemistry is Key for Hydrophobicity: While the microstructures are essential, the research strongly emphasizes that the chemical modification through aging and fluorination is what truly drives the superhydrophobic properties by reducing surface energy.
  • Microstructure Stability: The hierarchical microstructures formed are remarkably stable and are not significantly altered by the aging or fluorination treatments, meaning the post-processing focuses on surface chemistry rather than morphology.
  • Aging as a Viable Hydrophobicity Enhancement: The study demonstrates that a simple aging process can significantly increase contact angles, offering a potentially simpler alternative to chemical treatments in some cases.

Key Results

  • Improved Formability with Process Parameters:
    • Increasing the number of laser shocks (up to 5) generally improved the forming effect of the aluminum foil.
  • Increasing laser fluence (up to 45.2 J/cm²) enhanced formability, though higher fluences (76.39 J/cm²) led to slight damage.
  • Larger mold periods (up to 200 µm) resulted in better formability and replication of mold features.
  • Significant Hydrophobicity Enhancement:
    • Original aluminum foil had a contact angle of ~92°.
  • After aging treatment, contact angles reached up to 139°.
  • After fluorination treatment, contact angles reached 137.9°.
  • Smooth aluminum foil after fluorination showed a contact angle of 107.83°, highlighting the amplifying effect of microstructures.
  • Chemical Changes:
    • Aging treatment led to increased carbon content (from ~4.81% to 11.84%) due to adsorbed organic substances and a decrease in aluminum content.
  • Fluorination treatment introduced significant amounts of fluorine and silicon, with a higher perfluorodecyltriethoxysilane adsorption on microstructured surfaces compared to smooth surfaces.
  • Morphological Stability: SEM and microscopy images showed that the hierarchical microstructures remained largely unchanged after both aging and fluorination treatments.

Limitations and Future Work

  • Randomness of Secondary Microstructures: The paper acknowledges that the secondary microstructures formed by splashing have a degree of randomness, which can lead to fluctuations in contact angle measurements. This inherent characteristic of the laser ablation imprinting process limits precise controllability.
  • Cost-Effectiveness vs. Precision: While laser ablation imprinting offers cost-effectiveness and high efficiency, its precision controllability is noted as relatively low.
  • Future Work: The authors suggest that understanding the mechanism of this process opens avenues for developing scanning strategies or multiparallel processing approaches to enhance efficiency and achieve large-area microstructure fabrication. Further research could focus on optimizing the process for greater control over secondary microstructure morphology.

Summary updated

Abstract

This study aims to reveal the mechanism of a novel method for fabricating hierarchical microstructured hydrophobic surfaces. Specifically, plasma shock waves induced by laser ablation are applied to the workpiece to replicate the microstructures on the mold surface, thus obtaining primary microstructures. Meanwhile, the material splashing effect induced by laser ablation is utilized to form secondary microstructures on the basis of the primary microstructures. Subsequently, fluorination treatment and aging treatment are adopted to alter the chemical composition of the hierarchical microstructures on the workpiece surface, thereby reducing the surface energy and enhancing hydrophobicity. In addition, this study investigates the effects of a different number of laser shocks, laser fluence and mold periods on the forming results. Under a laser fluence of 28.97 J/cm2, within the range of one to five laser shocks, the forming effect of the aluminum foil workpiece improves with the increase in the number of laser shocks. When the number of laser shocks is set to 3, within the laser fluence range of 19.1–76.39 J/cm2, the forming result of the aluminum foil workpiece is enhanced as the laser fluence increases. The larger the mold period, the better the forming effect of the workpiece. An analysis of aging treatment and fluorination treatment reveals their impacts on the workpiece through assessments of wettability, surface chemical composition, and surface morphology. The findings reveal that both aging and fluorination treatments significantly enhance the contact angle of the aluminum foil workpiece, all while preserving its original surface structure. The main changes occur in terms of element content and chemical composition, and a large number of non-polar groups are generated on the workpiece surface after the modification treatments.
BibTeX
@inproceedings{li2026research,
  author = {Genyi Li and Pin Li and Rui Zhang and Haoran Sun and Zheng Shi and Zongbao SHEN},
  title = {{Research on the Mechanism of Fabricating Hierarchical Microstructured Hydrophobic Surfaces via Laser Ablation Imprinting}},
  booktitle = {Metals},
  year = {2026},
  doi = {10.3390/met16030349},
}

Loading related content...

Figure