Abstract
Granite ground construction quality is directly related to the quality and grade of a building. This paper addresses common quality problems in granite floor construction by proposing four essential integrated technologies: CAD numerical control pattern slicing, laser theodolite orientation positioning and mapping, granite ground seamless treatment, and granite ground crystallization processing. These methods result in smoother, more reflective surfaces while being more efficient, environmentally friendly, and economical. The paper concludes with an analysis of economic and social benefits based on engineering examples.
Introduction
While granite is a staple in high-end architecture due to its hardness and beauty, traditional manual paving methods often remain the "weakest link" in the industry. These methods frequently lead to "hollowing" (gaps under the stone), uneven seams, poor durability, and surface irregularities. In large-scale public buildings, these defects lead to high maintenance costs and safety issues. The challenge lies in bridging the gap between raw stone materials and a perfectly flat, seamless, high-gloss finish capable of withstanding heavy foot traffic.
Integrated Construction Methodology
The proposed workflow replaces traditional manual methods with an integrated suite of four technologies:
- CAD/CNC Pattern Slicing: Designs are mapped in CAD and executed via CNC water-jet cutters. This ensures "seamless parquet" with assembly errors under 1mm and significantly reduces material waste.
- Laser Theodolite Positioning: To solve alignment problems, laser theodolites establish a high-precision axis control network. This ensures the leveling layer and stone layout are perfectly square and level before installation.
- Seamless Treatment: After paving, "secondary cutting" is performed along the joints, which are then filled with color-matched marble glue. This eliminates height differences and visible cracks typical of standard stone floors.
- Crystallization Processing: This final stage involves a multi-stage grinding process (using 50# to 2000# grit) followed by the application of chemical "hard agents" (k-2 and k-3). Under the heat and pressure of the grinding machine, these agents trigger a physical-chemical reaction that forms a hard, anti-slip, mirror-like crystal layer integral to the stone surface.
Case Study and Technical Results
The methodology was validated through a real-world engineering case study: a 24-story office building project in the Tsingtao Economy & Technology Development Area.
Precision and Quality Standards
The implementation achieved high precision, keeping surface smoothness and flatness errors below 0.5mm. The surface glossiness reached over 80 degrees (a "mirror effect"), compared to the 40-50 degrees achieved after standard fine grinding.
Economic and Environmental Impact
The project saved a total of 117,300 RMB in direct costs. While the initial implementation cost was higher, the savings in labor, material waste, and the elimination of post-construction repairs made the method significantly more profitable.
Beyond economics, the process allows for water recycling and produces significantly less noise than traditional grinding methods.
Conclusion and Limitations
The integrated technology offers a superior alternative to traditional granite paving. However, it requires strict environmental controls: the marble glue requires a 24-hour water-free curing window, and the crystallization process requires a perfectly clean environment to prevent surface contamination. Future research may explore the automation of "secondary cutting" and the effectiveness of these chemical agents on softer stones like marble or limestone.
Summary updated