Research on the design method of the automobile design load of the small span bridge in the heavy traffic volume

Yan Dai, Dengzhou Quan, Hongjie Guan2016 · DOI

Abstract

Current bridge design standards often fail to account for the increasing weight and volume of modern commercial traffic, particularly on small-span bridges. This paper analyzes real-world traffic data from the Luogang Section of National Highway No. 107 to propose a modernized design load model. Using probabilistic modeling and Monte Carlo simulations, the study establishes a "Lane Load + Concentrated Force" model that ensures structural safety over a 100-year design life.

Introduction

Small-span bridges (typically under 60 meters) are highly sensitive to live loads. As commercial transport evolves, the discrepancy between design standards and actual traffic loads grows, leading to premature structural degradation and shortened lifespans. This research aims to bridge this gap by providing a data-driven methodology for calculating automobile design loads in heavy traffic scenarios, ensuring safety without excessive over-engineering.

Methodology and Data Collection

The study utilized high-speed dynamic Weigh-In-Motion (WIM) equipment to collect a week's worth of traffic data on a major Chinese highway. The dataset included an average of 33,470 vehicles per day, capturing parameters such as gross vehicle weight (GVW), axle loads, and vehicle spacing for seven distinct vehicle categories, from passenger cars to six-axle trucks.

Statistical Characterization of Traffic Loads

A critical step in the methodology is the accurate statistical modeling of vehicle weights. The researchers found that different vehicle classes require distinct distribution models to reflect operational realities:

  • Light Vehicles: Passenger cars and light trucks are well-represented by lognormal distributions.
  • Heavy Vehicles: Multi-axle trucks (3–6 axles) exhibit a bimodal or "two-humped" normal distribution. This statistically represents the reality of logistics where trucks are typically either traveling empty/lightly loaded or at maximum capacity.
Figure 1: Probability density of gross weight for passenger cars, showing a lognormal distribution fit.
Figure 5: Probability density of gross weight for six-axle trucks, illustrating the characteristic bimodal distribution.

Load Effect Simulation and Design Recommendations

Using MATLAB, the researchers conducted Monte Carlo simulations of random fleets crossing bridges with spans ranging from 5m to 60m. The resulting load effects (bending moments and shear forces) were found to follow a Gamma distribution. To project these effects over a 100-year design period, extreme value theory was applied.

Based on the equivalent principle of load effects, the study recommends a modernized design load model for heavy traffic areas:

  • Uniform Lane Load ($q_k$): 32 kN/m.
  • Concentrated Force ($P_k$): Varies linearly with span length ($L$), ranging from 536.5 kN for 5m spans to 1030 kN for spans of 40m and above (e.g., $P_k = 14.1L + 466$ for intermediate spans).
  • Shear Enhancement: A coefficient of 1.325 is recommended for concentrated loads when calculating shear effects to ensure bridge supports are sufficiently robust.

Conclusion

This research provides a robust theoretical framework for bridge design in regions with heavy traffic. By moving beyond static standards to a probabilistic, data-driven model, engineers can better ensure the longevity and safety of small-span bridge infrastructure against the stresses of modern heavy vehicle fleets.

Summary updated

Abstract

Based on the vehicle load survey data measured by High speed dynamic weighing equipment in Luogang Section of National Highway No.107 and the basic theory of probability and statistics, the parameters such as gross vehicle weight, axle load, wheelbase, vehicle spacing and so on,are statistically analysed in this paper so as to confirm the probability distribution function of the category vehicle load and the representative values of related parameters.The simulation program of random fleet across the bridge was compiled by MATLAB.According to the calculation analysis of the load effect, the probability distribution type, distribution parameters and the standard value of load effect in the design reference period of medium-small span simply-supported bridges can be comfirmed.And on basis of the equivalent principle of load effect, a design load value of standard vehicle is recommended in the paper.The theoretical method is provided for the design of the automobile design load of small span bridges under heavy traffic load.
BibTeX
@misc{dai2016research,
  author = {Yan Dai and Dengzhou Quan and Hongjie Guan},
  title = {{Research on the design method of the automobile design load of the small span bridge in the heavy traffic volume}},
  year = {2016},
  doi = {10.2991/icseee-15.2016.25},
}

Loading related content...

Figure