Research on the Active Suspension Control Strategy of Multi-Axle Emergency Rescue Vehicles Based on the Inverse Position Solution of a Parallel Mechanism

Qinghe Guo, Dingxuan Zhao, Yurong Chen, Shenghuai Wang, Hongxia Wang, Chen Wang, Renjun LiuVehicles 2025 · DOI

TL;DR

This paper introduces a novel active suspension control strategy for multi-axle emergency rescue vehicles that simplifies control complexity by modeling the vehicle as a 3-DOF parallel mechanism. This approach significantly improves vehicle attitude stabilization and vibration suppression compared to traditional hydro-pneumatic suspension, enhancing ride comfort and handling stability, especially on challenging terrains.

What Problem Does This Paper Address?

Multi-axle emergency rescue vehicles operate in demanding, often unstructured environments where maintaining vehicle stability and ride comfort is crucial for both passenger safety and equipment functionality. Existing active suspension control strategies often struggle with the increased complexity of multi-axle systems, leading to high computational demands, model dependence, and implementation difficulties. Specifically, controlling each individual actuator in a multi-axle vehicle becomes computationally intensive and can introduce delays, compromising overall system performance. The paper aims to overcome these challenges by proposing a more efficient and robust control strategy.

Methods

The core innovation lies in treating the multi-axle vehicle's suspension system as a 3-DOF (Degrees of Freedom) parallel mechanism. The six hydraulic suspension actuators of a three-axle vehicle are grouped into three interconnected pairs, effectively creating a virtual three-point support system for the vehicle body. This simplification allows the use of inverse kinematics of a parallel mechanism to calculate the required displacement of each equivalent suspension actuator. The control strategy then drives these actuators based on these calculated displacements to achieve precise control over the vehicle's vertical displacement, pitch, and roll angles. This method decouples the complex multi-axle system into a more manageable parallel mechanism, reducing computational load and improving real-time control capabilities.

Datasets

Not discussed in the paper. The study relies on experimental data collected from a custom-built three-axle vehicle experimental platform.

Key Insights and Ideas

  • Parallel Mechanism Abstraction: The key insight is abstracting the complex multi-axle suspension into a 3-DOF parallel mechanism. This geometric simplification is the foundation for reducing control complexity.
  • Grouped Actuator Control: Interconnecting hydraulic cylinders within groups and controlling them as a unit, rather than individually, drastically reduces the number of control variables and computational burden.
  • Inverse Position Solution for Control: Leveraging the inverse position solution of the parallel mechanism directly translates desired vehicle attitude changes into actuator displacement commands, offering a more direct and potentially faster control loop.
  • Improved Vibration Suppression: The strategy effectively targets and suppresses vibrations in the 0-10 Hz frequency band, which is particularly sensitive to human perception, leading to enhanced ride comfort.

Key Results

Experimental results from pulse road and gravel pavement tests demonstrate the superiority of the proposed Active Suspension Control Strategy Based on Inverse Position Solution of a Parallel Mechanism (ASCS-IPSPM) over conventional Hydro-pneumatic Suspension (HPS).

  • Attitude Stabilization:
    • Under pulse road conditions, peak fluctuations in vertical displacement, pitch angle, and roll angle were reduced by 35.73%, 48.31%, and 51.09%, respectively, compared to HPS.
  • Vibration Suppression:
    • On gravel pavement, RMS values of vertical, pitch, and roll accelerations were reduced by 25.66%, 22.31%, and 21.13%, respectively, compared to HPS.
  • The ASCS-IPSPM effectively suppresses vibrations in the 4-8 Hz range, which is highly sensitive to human perception.

Limitations and Future Work

The authors acknowledge that the current control strategy is primarily validated under low-speed driving conditions. The inherent phase lag of hydraulic actuation systems and vehicle powertrain limitations pose challenges for achieving real-time and precise compensation at high speeds.

Future research directions include:

  • Developing time-delay compensation mechanisms for high-speed driving.
  • Optimizing energy management strategies to overcome power limitations.
  • Enhancing the overall dynamic response performance of the system.
  • Exploring the applicability of this strategy to vehicles with more than three axles and different actuator types.

Summary updated

Abstract

Aiming at the problems of complex control processes, strong model dependence, and difficult engineering application when the existing active suspension control strategy is applied to multi-axle vehicles, an active suspension control strategy based on the inverse position solution of a parallel mechanism is proposed. First, the active suspension of the three-axle emergency rescue vehicle is grouped and interconnected within the group, and it is equivalently constructed into a 3-DOF parallel mechanism. Then, the displacement of each equivalent suspension actuating hydraulic cylinder is calculated by using the method of the inverse position solution of a parallel mechanism, and then the equivalent actuating hydraulic cylinder is reversely driven according to the displacement, thereby realizing the effective control of the attitude of the vehicle body. To verify the effectiveness of the proposed control strategy, a three-axis vehicle experimental platform integrating active suspension and hydro-pneumatic suspension was built, and a pulse road experiment and gravel pavement experiment were carried out and compared with hydro-pneumatic suspension. Both types of road experimental results show that compared to hydro-pneumatic suspension, the active suspension control strategy based on the inverse position solution of a parallel mechanism proposed in this paper exhibits different degrees of advantages in reducing the peak values of the vehicle vertical displacement, pitch angle, and roll angle changes, as well as suppressing various vibration accelerations, significantly improving the vehicle’s driving smoothness and handling stability.
BibTeX
@inproceedings{guo2025research,
  author = {Qinghe Guo and Dingxuan Zhao and Yurong Chen and Shenghuai Wang and Hongxia Wang and Chen Wang and Renjun Liu},
  title = {{Research on the Active Suspension Control Strategy of Multi-Axle Emergency Rescue Vehicles Based on the Inverse Position Solution of a Parallel Mechanism}},
  booktitle = {Vehicles},
  year = {2025},
  doi = {10.3390/vehicles7030069},
}
Figure