Research on Speed Control of Permanent Magnet Synchronous Motor Based on Improved Fast Terminal Sliding Mode with Adaptive Control Law

Mingyuan Hu, Lei Zhang, Ran Tao, Ping WangSymmetry 2025 · DOI

TL;DR

This paper introduces a novel control strategy for Permanent Magnet Synchronous Motors (PMSMs) that enhances speed control accuracy and robustness against disturbances. By combining an improved fast terminal sliding mode (IFTSM) surface with a new adaptive reaching law (NARL), the proposed method achieves faster convergence, reduced chattering, and superior performance compared to existing techniques, making it ideal for demanding applications.

What Problem Does This Paper Address?

Permanent Magnet Synchronous Motors (PMSMs) are widely used due to their efficiency and dynamic response. However, their performance can be significantly degraded by internal uncertainties (like parameter variations) and external disturbances (such as load changes). Traditional control methods like PI controllers, while simple, struggle to maintain accuracy under these challenging conditions. Sliding Mode Control (SMC) offers better robustness, but conventional SMC can lead to chattering and slow convergence. Fast Terminal Sliding Mode Control (FTSMC) improves convergence speed but can suffer from singularity issues. This paper aims to address these limitations by developing a robust and precise speed control system for PMSMs that can handle uncertainties and disturbances effectively, ensuring high performance even in complex operating environments.

Methods

The core of this paper lies in the development of a novel control algorithm that integrates two key components:

  • Improved Fast Terminal Sliding Mode (IFTSM) Surface: This sliding surface is designed to achieve finite-time convergence. It incorporates nonlinear terms and an integral feedback mechanism. The nonlinear terms enhance convergence speed, especially for small errors, while the integral term actively eliminates steady-state errors. This design also addresses the singularity problem found in traditional terminal sliding mode control.
  • Novel Adaptive Reaching Law (NARL): This reaching law dynamically adjusts the control input's magnitude based on the system's error. It features a state-dependent gain adjustment function that provides a strong gain for large errors (accelerating convergence) and a weak gain for small errors (suppressing chattering). Additionally, a nonlinear damping term is included to further enhance robustness and smooth the convergence process.

The synergy between the IFTSM surface and the NARL aims to balance fast convergence with minimal chattering, leading to improved overall system performance and robustness.

Datasets

Not discussed in the paper. The evaluation is based on experimental results from a physical PMSM setup.

Key Insights and Ideas

  • Synergistic Control: The combination of IFTSM and NARL is more than just additive; their interaction creates a control system that effectively tackles both fast convergence and chattering suppression, a common trade-off in sliding mode control.
  • Adaptive Gain for Precision: The NARL's ability to dynamically adjust its gain based on the error magnitude is crucial. This allows for aggressive control when needed (e.g., during load changes) and gentle control when precision is paramount (e.g., near the setpoint), leading to both speed and accuracy.
  • Integral Action for Steady-State: The integral term in the IFTSM surface is a simple yet effective way to eliminate persistent steady-state errors, which is vital for applications requiring high precision.
  • Nonlinear Damping for Stability: The nonlinear damping term in NARL acts like a shock absorber, smoothing out rapid changes in the sliding surface and preventing drastic system fluctuations, especially under disturbances.

Key Results

The proposed IFTSMC-NARL controller demonstrated superior performance across various experimental scenarios:

  • Fastest Response: Achieved the fastest response speed during no-load startup compared to other methods.
  • Minimal Speed Fluctuation: Exhibited the smallest speed fluctuation (around 2 rpm) after a 1 N·m load disturbance was applied and removed.
  • Reduced Chattering: Showed the lowest amplitude of chattering during steady-state operation.
  • Improved Current Response: The q-axis current response was smooth and well-regulated, mirroring the speed control performance and indicating excellent torque control.
  • Robustness: The controller effectively handled sudden load changes and parameter variations, showcasing its strong anti-interference capability.

Limitations and Future Work

  • Limitations: While the paper demonstrates excellent performance, the complexity of tuning the parameters for the NARL and IFTSM might be a consideration for practical implementation. The paper focuses on speed control, and extending it to more complex multi-variable control scenarios could be beneficial.
  • Future Work: The authors propose extending the IFTSM framework to fixed-time convergence designs to reduce dependence on initial state information. They also plan to integrate intelligent optimization algorithms (like adaptive particle swarm optimization) for automatic parameter tuning and explore its application in multi-motor coordinated control systems.

Summary updated

BibTeX
@article{hu2025research,
  author = {Mingyuan Hu and Lei Zhang and Ran Tao and Ping Wang},
  title = {{Research on Speed Control of Permanent Magnet Synchronous Motor Based on Improved Fast Terminal Sliding Mode with Adaptive Control Law}},
  journal = {Symmetry},
  year = {2025},
  doi = {10.3390/sym17101586},
}
Figure