Research on Multi-mode Swimming Control Modeling of Bionic Underwater Propeller with Double-Tail Fins

Ou Xie, Boquan Li, Qin YanAdvances 2015 · DOI

Abstract

A novel type of bionic underwater hybrid propeller is proposed, which combines undulation propulsion and jet propulsion through the use of cooperative double tail fins. This system is capable of achieving a series of motions: cruise, acceleration, turning, and braking. Targeting approximate smooth tail contours using rigid tail linkages, a bionic propeller control modeling method is discussed based on a digital approximation method. The resulting control model successfully achieves both undulation and jet propulsion modes.

Introduction

In the natural world, aquatic animals have evolved specialized swimming patterns: fish typically use undulation propulsion (waving their bodies/tails) for high efficiency and stealth, while creatures like jellyfish and squid use jet propulsion for rapid acceleration.

Engineers designing underwater robots often struggle to combine these traits. Single-tail bionic designs frequently suffer from "head-shaking" instability, and most propellers are optimized for only one mode of travel. This research addresses two main challenges:

  1. Multi-mode capability: Creating a mechanical strategy that allows a single robot to cruise, accelerate, turn, and brake using different biological inspirations.
  2. The "Smoothness" Gap: Biological tails move in continuous, smooth curves, but robots are built from discrete, rigid linkages. A mathematical method is needed to approximate these smooth waves using a limited number of mechanical joints without losing propulsive efficiency.

Methodology

The proposed bionic propeller consists of a "fish head" and two symmetrical, multi-joint tail fins. The core of the control strategy relies on several key modeling techniques:

  • Propulsion Modeling: Traveling wave equations define the ideal movement of the tails. To prevent the robot's head from shaking during swimming, these equations were modified to ensure the "base" of the tail remained stable relative to the body.
  • Digital Approximation Method: This is the paper's core technical contribution. Since a robot cannot perfectly replicate a continuous curve, the authors discretized the theoretical wave into $M$ specific postures.
  • Optimization via "Added-Mass": To ensure effective water displacement, the "added-mass method" was used. This equates the mass of water pushed by the rigid linkages to the mass pushed by a theoretical "perfect" biological tail.
  • Crossing Ratio ($R_c$): A geometric parameter was introduced to find the optimal "crossing points" where the rigid mechanical segments should intersect the theoretical smooth curve to minimize error.

Key Insights

  • Cooperative Driving: Using two tail fins instead of one allows for "cooperative driving." When the tails move in sync (undulation), they provide stable cruising. When they flap toward each other (reverse flap), they create a jet of water, mimicking a jellyfish.
  • Complexity vs. Accuracy: The study compared models using three linkages versus four linkages per fin. While four linkages provided a slightly more accurate approximation, three linkages offered the best balance between control simplicity and mechanical efficiency.
  • Mathematical Translation: The study successfully translated abstract biological wave functions into concrete "joint angle" commands (slope angles $\phi$ and control angles $\theta$) that standard motor-driven robotic systems can execute.

Results and Discussion

The control model successfully demonstrated four distinct movement states, enabling a highly versatile underwater platform.

Figure 1: The four swimming modes of the double-tail bionic propeller: (a) undulation propulsion for cruising, (b) jet propulsion for acceleration, (c) turning via asymmetrical movement, and (d) braking through drag creation.
  1. Undulation: For efficient cruising.
  2. Jet Propulsion: For rapid acceleration.
  3. Turning: Achieved by asymmetrical fin movement.
  4. Braking: Achieved by specific fin positioning to create drag.

The digital approximation method proved highly effective, keeping the deviation from the ideal biological curve extremely low (in the range of $10^{-5}$ meters). Detailed joint-angle-over-time profiles were generated, providing a blueprint for programming physical robotic actuators.

Conclusion and Future Work

While this study establishes a robust mathematical and modeling framework, it remains primarily simulation-based. The "added-mass" method provides a useful approximation but does not account for complex turbulence or vortex shedding present in real-world fluid environments.

Future research will focus on building a physical double-tail prototype to validate these models in a water tank, measuring actual propulsive force, energy efficiency, and real-world speed compared to traditional single-tail bionic designs.

Summary updated

Abstract

A novel type of bionic underwater hybrid propeller is proposed, which combines the undulation propulsion and jet propulsion by the use of the double tail fins cooperative driving, and is capable of achieving a serial of motions: cruise, acceleration, turning and braking. Targeting at approximate smooth tail contours by using rigid tail linkage, a bionic propeller control modeling method is discussed based on digital approximation method, and the control model is established to achieve the undulation propulsion and jet propulsion.
BibTeX
@inproceedings{xie2015research,
  author = {Ou Xie and Boquan Li and Qin Yan},
  title = {{Research on Multi-mode Swimming Control Modeling of Bionic Underwater Propeller with Double-Tail Fins}},
  booktitle = {Advances},
  year = {2015},
  doi = {10.2991/icmra-15.2015.58},
}
Figure