Research on Home Healthcare Management System Based on the Improved Internet of Things Architecture

Benzhen Guo, Beibei Dong, Xiao Zhang, Jingjing Yang, Zhihui WangInternational Journal of Smart Home 2015 · DOI

Abstract

This paper designs an improved Internet of Things (IoT) architecture that redefines the traditional model into three distinct domains: node, network, and application. Based on this architecture, a home healthcare management system was implemented. The system utilizes Zigbee-enabled medical nodes (blood pressure, blood oxygen, and ECG) connected to the internet via a custom Zigbee-Wifi gateway. This allows for remote data storage, analysis, and user monitoring through intelligent terminals like smartphones. Experimental results, specifically for blood pressure measurement, demonstrate the system's feasibility and reliability.

Introduction

As global populations age, the prevalence of chronic diseases such as hypertension continues to rise. In China alone, over 200 million people suffer from high blood pressure, necessitating continuous, long-term monitoring. Traditional healthcare models often rely on "passive treatment," whereas modern requirements shift towards an "early warning" model. While consumer-grade wearables exist, many rely on Bluetooth, which requires a smartphone to be constantly within range. This paper addresses these limitations by proposing a robust, independent IoT infrastructure for home health management.

The Improved IoT Architecture

Traditional IoT models often define the "sensing domain" as a passive layer for one-way data collection. The authors propose an "Improved IoT Architecture" that redefines this as the Node Device Domain. This shift emphasizes bidirectional communication, allowing devices to not only send vital signs but also receive control commands from a central server.

System architecture of the home healthcare management system based on the improved IoT model.

The architecture is structured into three tiers:

  1. Node Device Domain: Comprises medical sensors and actuators capable of remote control and reverse data transmission.
  2. Network Domain: Facilitates connectivity through a hybrid Zigbee-Wifi gateway, balancing low-power local networking with high-speed internet backhaul.
  3. Application Domain: Includes the backend server (Tomcat, MySQL) and mobile applications for data visualization and device management.

System Implementation

A key innovation of this system is the Zigbee-Wifi Gateway, which acts as an independent bridge between local medical sensors and the cloud. This independence is crucial for elderly users who may not always have a smartphone nearby or the technical skill to manage complex device pairings.

Hardware block diagram of the Zigbee-Wifi gateway showing the integration of Wifi and Zigbee modules.

Hardware Design

The prototype blood pressure node was developed using an STM32F103 master controller and a CC2530 Zigbee module. Signal processing involves an AD620 instrumentation amplifier and active filters to isolate the pulse wave signal from static cuff pressure. The gateway itself integrates an XLW002S Wifi module and a CC2530 Zigbee module, communicating via UART.

Software and Communication

The system uses a custom message format comprising a message head (length, command type, sequence ID) and a message body (device/node IDs, data type, and payload). Data is transmitted via HTTP to a JSP/Servlet-based backend, where it is stored in a MySQL database.

Experimental Results

To validate the system, measurements were taken from three human subjects and compared against a medical-grade Omron HEM-7052 electronic sphygmomanometer.

Subject Prototype (mmHg) Omron Reference (mmHg)
Subject A 118 / 74 122 / 76
Subject B 131 / 85 136 / 89
Subject C 113 / 63 120 / 69

The prototype demonstrated high data consistency and stability. While the readings were slightly lower than the reference device, the authors attribute this to the specific amplitude coefficients used in the oscillometric calculation, which can be further calibrated.

Conclusion

The proposed home healthcare management system successfully demonstrates a reliable end-to-end pipeline for remote health monitoring. By moving from a passive sensing domain to an active node domain and utilizing an independent gateway, the system provides a more robust solution for chronic disease management. Future work will focus on refining calibration algorithms and expanding the Zigbee network to include broader smart home functionalities.

Summary updated

Abstract

This paper designs an improved internet of things architecture to redefine the internet of things architecture into the node domain, the network domain and the application domain so as to design and implement a home healthcare management system based on this improved internet of things architecture. In this way, all of the equipments characterized with Zigbee communication function in the blood pressure measuring node, the blood oxygen measuring node and the ECG measuring node can be connected to the internet through the Zigbee-Wifi gateway. Meanwhile data uploaded by the users can be stored and analyzed on the backend server of the internet of things so that the users can review their health data and control the node devices through the intelligent terminals such as cell phone etc. Taking the blood pressure measurement as an instance, the experiment has proved the feasibility and reliability of this system.
BibTeX
@article{guo2015research,
  author = {Benzhen Guo and Beibei Dong and Xiao Zhang and Jingjing Yang and Zhihui Wang},
  title = {{Research on Home Healthcare Management System Based on the Improved Internet of Things Architecture}},
  journal = {International Journal of Smart Home},
  year = {2015},
  doi = {10.14257/ijsh.2015.9.9.06},
}
Figure