Research on Energy Regeneration Characteristics of Multi-Link Energy-Fed Suspension

Xuefeng Zhang, Jianze Liu, Yang Li, Guangzheng Wang, Yu Zou, Jiang LiuEnergies 2025 · DOI

TL;DR

This paper introduces a novel multi-link energy-fed suspension system designed to harvest vibration energy from vehicles. By converting vertical vehicle motion into rotational motion, the system efficiently regenerates energy, demonstrating a maximum output power of 16.84 W under specific excitation conditions, thereby improving both energy efficiency and ride comfort.

What Problem Does This Paper Address?

Traditional vehicle suspensions struggle to balance ride comfort and stability with energy efficiency. Active suspension systems offer improved performance but often increase overall energy consumption. This research addresses the need for an energy-efficient suspension system that can actively manage its characteristics while simultaneously harvesting energy from road vibrations, reducing the reliance on external power sources and potentially lowering the cost of active suspension implementation.

Methods

The core of this research is a novel multi-link shock absorber inspired by a single-blade hyperboloid. This design converts the vehicle's vertical vibrations into rotational motion, which then drives a permanent magnet brushless three-phase motor for energy generation. A mechanical motion filtering mechanism is incorporated to enhance regeneration efficiency. The study employs theoretical derivation to establish an energy regeneration formula, followed by simulation analysis and experimental verification using a 2-DOF quarter vehicle model. The system's dynamics are modeled using state-space equations, and road input is simulated using filtered white noise.

Datasets

Not discussed in the paper. The study relies on theoretical modeling, simulation, and experimental testing with controlled excitations.

Key Insights and Ideas

  • Novel Energy Harvesting Mechanism: The ingenious conversion of linear vehicle vibration into rotational motion for energy generation is a key innovation. This approach bypasses some limitations of purely linear energy harvesting systems.
  • Multi-Link Design for Efficiency: The multi-link parallel mechanism is shown to be compact, lightweight, and capable of efficient motion conversion, contributing to improved energy regeneration.
  • Synergy of Active and Regenerative Suspension: The paper highlights the potential for integrating energy-fed suspension with active suspension systems to achieve both active control and energy harvesting, reducing overall energy consumption.
  • Impact of Excitation Frequency: The study clearly demonstrates that higher excitation frequencies lead to increased energy regeneration, with a notable upward trend in voltage, current, and power output.

Key Results

  • Under an input excitation of 1.82 Hz, the system achieved a maximum instantaneous output voltage of 29 V, a maximum excitation current of 0.58 A, and a maximum power output of 16.84 W.
  • The multi-link active suspension exhibited good energy conversion efficiency, with the maximum growth rate of fed current reaching 65.71% as excitation frequency increased.
  • Experimental results showed that the energy-fed suspension improved ride comfort and stability compared to passive suspension systems, with inhibition ratios of body acceleration reaching up to 51.87% at 40 km/h.

Limitations and Future Work

  • Idealized Assumptions: The modeling relies on several assumptions, such as rigid body components, uniform mass distribution, and linear elastic suspension elements, which may not fully represent real-world complexities.
  • Parameter Variability: While the paper acknowledges that road roughness coefficients can vary, the primary focus is on a simplified model. Future work could explore more dynamic and adaptive control strategies for highly variable road conditions.
  • Energy Storage Optimization: The paper mentions supercapacitors as energy storage units but doesn't delve deeply into optimizing their selection or integration for maximum efficiency. Further research could explore different energy storage solutions and their impact on overall system performance.
  • Long-Term Durability and Wear: While the paper briefly mentions energy dissipation and wear, a more in-depth analysis of the long-term durability and maintenance requirements of the multi-link mechanism and its components would be beneficial.

Summary updated

Abstract

Inspired by the single-blade hyperboloid, a new type of multi-bar shock absorber was designed, which can recover vibration energy. Its principle is to convert the droop reciprocating vibration of the vehicle in the spatial domain into the reciprocating rotational motion in the plane through the trajectory and force characteristics of the single-blade hyperboloid moving along the space. To improve the efficiency of energy regeneration, a mechanical motion filtering mechanism was designed. Through theoretical derivation, the energy regeneration formula of a new type of multi-rod shock absorber was obtained. After simulation analysis and experimental verification, under the input excitation of 1.82 Hz, the maximum instantaneous output voltage can reach 29 V, the maximum excitation current is 0.58 A, and the maximum power is 16.84 W. The efficient recovery and utilization of energy have been achieved, and the ride comfort of the vehicle has been improved.
BibTeX
@inproceedings{zhang2025research,
  author = {Xuefeng Zhang and Jianze Liu and Yang Li and Guangzheng Wang and Yu Zou and Jiang Liu and Jiang Liu and Jiang Liu},
  title = {{Research on Energy Regeneration Characteristics of Multi-Link Energy-Fed Suspension}},
  booktitle = {Energies},
  year = {2025},
  doi = {10.3390/en18112743},
}

Loading related content...

Figure