Research on Control Strategy of Electro-Hydraulic Lifting System Based on AMESim and MATLAB

Wei Zhang, Qinghao Yuan, Yifan Xu, Xuguang Wang, Shuzhan Bai, Lei Zhao, Yang Hua, Xiaoxu MaSymmetry 2023 · DOI

TL;DR

This paper tackles the challenge of achieving high-precision position control in electro-hydraulic lifting systems, which are prone to flow instability and parameter uncertainties. They propose an observer-sliding mode control strategy, validated through AMESim-MATLAB co-simulations and semi-physical tests, demonstrating superior performance in terms of tracking accuracy and robustness compared to traditional PID and sliding mode controllers.

What Problem Does This Paper Address?

Electro-hydraulic lifting systems are crucial in agricultural machinery, enabling tasks like plowing. However, achieving precise control of these systems is difficult due to inherent issues like flow instability, parameter variations (e.g., due to changing soil conditions), and unpredictable external disturbances. Existing control methods, particularly PID control, often struggle to meet the increasing demands for intelligence and precision in modern agricultural equipment. While sliding mode control offers robustness, it can suffer from jitter and vibration. This paper aims to develop a control strategy that combines the benefits of robustness and high precision while mitigating the drawbacks of existing methods.

Methods

The core of this research is the development and validation of an observer-sliding mode control (OSMC) strategy. The approach involves:

  • System Modeling: A mathematical model of the electro-hydraulic lifting system is established using AMESim, capturing the dynamics of the servo motor, hydraulic pump, and cylinder.
  • Model Reduction: A higher-order mathematical model is reduced to a simpler form to facilitate controller design. This involves decomposing the system into two-time scale properties and a boundary layer model.
  • Observer Design: An observer is designed to estimate unmeasured states, specifically the velocity of the hydraulic cylinder, and to estimate system disturbances. This is crucial for compensating for uncertainties and external forces.
  • Sliding Mode Control (SMC) Design: A sliding mode controller is designed to ensure the system state converges to a desired sliding surface.
  • Observer-Sliding Mode Control (OSMC) Integration: The observer's estimates of disturbances are integrated into the sliding mode control law to enhance robustness and improve tracking performance.
  • Co-simulation and Validation: The proposed OSMC strategy is compared against conventional PID control and a standard sliding mode control through joint simulations using MATLAB/Simulink and AMESim. Furthermore, semi-physical tests are conducted on a custom-built test rig to validate the simulation results.

Datasets

Not discussed in the paper. The study relies on simulation models and experimental data collected from a test rig.

Key Insights and Ideas

  • The Synergy of Observer and Sliding Mode Control: The paper highlights that combining an observer to estimate disturbances with a sliding mode controller effectively addresses both the robustness requirements and the need for precise tracking in electro-hydraulic systems.
  • Mitigating SMC Jitter: A significant insight is that the proposed OSMC strategy successfully overcomes the jitter and vibration issues often associated with traditional sliding mode control, leading to smoother system operation.
  • Improved Robustness: The observer's ability to estimate and compensate for system uncertainties and external disturbances significantly enhances the overall robustness of the control system, making it more reliable under varying conditions.
  • The Value of Co-simulation and Semi-Physical Testing: The use of AMESim and MATLAB for co-simulation, followed by validation on a semi-physical test rig, provides a comprehensive approach to verify the effectiveness of the proposed control strategy.

Key Results

The study demonstrates that the proposed observer-sliding mode control strategy outperforms both PID control and standard sliding mode control in several key areas:

  • Displacement Tracking: Under constant load conditions, OSMC achieved a response speed of 1.25s, faster than PID (1.89s) and SMC (1.32s), with significantly reduced steady-state error (within 0.03mm).
  • Pressure Control: OSMC showed improved steady-state accuracy in pressure control compared to PID and SMC, with a significantly reduced average pressure error under variable load conditions (0.7 kPa).
  • Robustness: The OSMC method exhibited better performance under variable load conditions, showing improved tracking and reduced jitter compared to PID and SMC.
  • Response Time: In experimental tests, OSMC consistently achieved faster response times for both displacement and pressure control compared to PID and SMC. For instance, in displacement control under fixed tillage depth, OSMC achieved a response time of 1.30s, faster than PID (2s) and SMC (1.4s).

Limitations and Future Work

  • Limitations:
    • The paper acknowledges that while the OSMC strategy improves upon PID and SMC, achieving perfect control accuracy remains a challenge due to the inherent complexities of electro-hydraulic systems.
  • The study focuses on specific tractor lifting applications; broader applicability to other electro-hydraulic systems might require further investigation.
  • Future Work:
    • The authors suggest that future research could focus on improving energy efficiency in electro-hydraulic lifting systems, potentially through advanced pump control strategies.
  • Enhancing the durability and safety of hydraulic components through intelligent monitoring and fault diagnosis is also proposed.
  • Exploring the use of high-performance servo motors and advanced sensor technologies could further improve control precision.
  • Investigating dual-displacement designs (large for fast movement, small for precision control) is also mentioned as a future direction.

Summary updated

BibTeX
@article{zhang2023research,
  author = {Wei Zhang and Qinghao Yuan and Yifan Xu and Xuguang Wang and Shuzhan Bai and Lei Zhao and Yang Hua and Xiaoxu Ma},
  title = {{Research on Control Strategy of Electro-Hydraulic Lifting System Based on AMESim and MATLAB}},
  journal = {Symmetry},
  year = {2023},
  doi = {10.3390/sym15020435},
}
Figure