Research on a novel Dual-Base Transistor (DUBAT) in 0.5 m Standard Si-base CMOS Process

Yan Chen, Changlong Liu, Weilian Guo2015 · DOI

Abstract

A novel Dual-Base Transistor (DUBAT) exhibiting negative-resistance characteristics is presented. Fabricated using a standard 0.5 μm silicon-based CMOS process, this device integrates a lateral p-n-p Bipolar Junction Transistor (BJT) and a Hybrid-Mode Transistor. Unlike traditional DUBATs requiring specialized processes, this design is fully compatible with standard CMOS technology. The custom-designed structure achieves significant current enhancement without relying on standard component models. Experimental results show an average negative resistance of -1.04 kΩ, a high peak current of 1.2576 mA, and a low valley current of 20.5970 μA, resulting in a peak-to-valley current ratio (PVCR) of 61.06.

Introduction

Negative Differential Resistance (NDR) is a phenomenon where current decreases as voltage increases, serving as a fundamental building block for high-speed oscillators, compact logic gates, and low-power memory. While the Dual-Base Transistor (DUBAT) is a known architecture for achieving NDR, its implementation has typically required expensive, non-standard processes like BiCMOS or III-V compound semiconductors. This research addresses the challenge of creating a high-performance DUBAT using a standard, low-cost 0.5 μm Si-base CMOS process.

Device Architecture and Fabrication

The researchers departed from standard foundry library components to hand-engineer a unique three-terminal structure. The traditional n-p-n BJT in a DUBAT was replaced with a "Hybrid-Mode Transistor." This hybrid device is essentially a MOSFET where the source and drain function as the emitter and collector of a bipolar device, while the gate-controlled region acts as the base. By shorting the gate to the emitter or collector, the device leverages both MOS and bipolar effects for enhanced performance.

Figure 1: (a) Circuit diagram of the DUBAT and (b) cross-sectional view of the integrated device structure.

The total device footprint is a compact 20.55 μm × 6.72 μm. The custom layout of the lateral p-n-p BJT and the Hybrid-Mode Transistor was optimized for maximum current enhancement and area efficiency.

Experimental Results

Electrical characterization was performed using a Keithley 4200 semiconductor characterization system at room temperature. The device successfully demonstrated strong NDR characteristics.

Figure 5: Measured I-V characteristics of the DUBAT showing the negative differential resistance region across various base-emitter voltages.

Key performance metrics include:

  • Peak Current ($I_P$): 1.2576 mA at $V_{BE} = 3V$.
  • Valley Current ($I_V$): 20.5970 μA.
  • Peak-to-Valley Current Ratio (PVCR): 61.06.
  • Average Negative Resistance ($R_N$): -1.04 kΩ.

Discussion and Insights

The NDR effect is driven by a "starvation" mechanism. As the collector-emitter voltage ($V_{CE}$) increases, the effective gate-source voltage of the Hybrid-Mode Transistor (defined as $V_{BE} - V_{CE}$) decreases. This pinches off the MOSFET channel, starving the p-n-p transistor of its base current and causing the total collector current to drop sharply.

This approach proves that bipolar-like NDR performance can be achieved in standard CMOS without the complexity of BiCMOS. However, some discrepancies in reported valley current data (ranging from nA to μA levels in different sections of the source) suggest a need for further characterization. Additionally, while static performance is excellent, future work must evaluate dynamic switching speeds and thermal stability for practical application in memory and logic circuits.

Conclusion

The successful fabrication of a DUBAT in a standard 0.5 μm CMOS process with a high PVCR of 61.06 marks a significant step toward low-cost, high-density NDR integration. By utilizing a Hybrid-Mode Transistor, the design achieves high performance and area efficiency, making it a promising candidate for next-generation integrated circuits.

Summary updated

Abstract

A novel Dual-Base Transistor (DUBAT) having a negative-resistance characteristic is presented. This device contains a lateral p-n-p Bipolar-Junction-Transistor (BJT) and a Hybrid-Mode Transistor, and is fabricated on silicon based 0.5m CMOS process, compatible with the standard CMOS technology as distinct from the traditional DUBAT. The structure of BJT and the Hybrid-Mode Transistor is self-designed to have better current enhancement, didn't use the standard component models provided by the process. The total size of the device is 20.55 m6.72 m. The experimental results demonstrates that the average value of the negative resistance is about -1.04 k, the DUBAT has a low valley current of 20.5970 A, a high peak current of 1.2576 mA and a peak-to-valley current ratio of 61.06. The I-V characteristic of the device is also discussed in the paper.
BibTeX
@misc{chen2015research,
  author = {Yan Chen and Changlong Liu and Weilian Guo},
  title = {{Research on a novel Dual-Base Transistor (DUBAT) in 0.5 m Standard Si-base CMOS Process}},
  year = {2015},
  doi = {10.2991/icmmcce-15.2015.583},
}

Loading related content...

Figure