Abstract
With the rapid development of the economy, the scale of transmission networks has been expanding, bringing higher demands and challenges on transmission line operation and maintenance. In this paper, the multi-rotor unmanned aerial vehicles (UAVs) safety inspection rules and automatic detailed inspection methods for transmission towers are studied. The theoretical model of multi-rotor UAVs of transmission lines inspection is established. The imaging calculation range of multi-rotor UAV-equipped cameras is determined. According to the inspection theory model, the flight safety judgment standard is designed, and the key parts of the transmission lines that need to be inspected are determined according to the accurate model of the transmission tower. Then the inspection waypoints are manually operated, and the photographing position and angle of each waypoint from the flight control are recorded through the waypoint planning function. Finally, the waypoints are connected in order, and the inspection route is automatically generated to achieve automatic detailed inspection. The inspection efficiency, error analysis and position accuracy comparing the proposed method with some state-of-the-art methods have been evaluated. The results show that the position error of UAVs automatic detailed inspection is less than 10 cm. The error of height is between 1.26 and 1.76 meter. Compared with the traditional manual inspection, the efficiency of multi-rotor UAVs automatic detailed inspection can be increased by 57.98%~62.88% and can be applied to large-scale inspection of transmission lines.
Introduction
As power grids expand to meet growing energy demands, maintaining thousands of miles of transmission lines becomes a monumental task. Traditional manual inspections are slow, labor-intensive, and carry inherent safety risks for personnel. While drones (UAVs) have been used for "overview" inspections, "detailed" inspections—which require close-up photos of specific components like insulators, fittings, and tower foundations—remain difficult to automate. The primary challenges are safety (avoiding collisions or high-voltage arcs) and precision (ensuring the camera is perfectly angled to capture small defects).
Methodology
The proposed autonomous inspection system integrates several key technologies to ensure safety and efficiency.
Safety Distance Modeling
A mathematical model was developed to calculate the minimum safe distance between the UAV and power lines. This formula accounts for the UAV’s physical dimensions, GPS positioning errors, wind-induced drift, and communication latency.
The Electronic Fence
Using 3D LiDAR data, the system generates a virtual cuboid "fence" around the transmission tower. If the UAV’s flight path accidentally encroaches on this zone, the flight controller automatically adjusts the attitude to prevent a crash.
Route Planning (Teach-and-Repeat)
The system uses a "teach-and-repeat" approach. First, LiDAR is used to create a high-fidelity 3D point cloud of the tower. A pilot then performs an initial manual flight to identify the best waypoints and camera angles for each critical component. The system records these coordinates and connects them into an optimized, repeatable flight path for future autonomous missions.
Camera Optimization
To ensure high-quality data capture, researchers derived formulas to calculate the "effective monitoring range" of various cameras (like the Zenmuse Z30 or X5S). This geometric approach ensures that automated waypoints result in perfectly framed, high-resolution images.
Results and Discussion
The study was validated using real-world infrastructure in Guangdong Province, China, specifically the "110kV Baonan" line.
- Efficiency Gains: The autonomous method increased inspection efficiency by 57.98% to 62.88% compared to traditional manual drone operation.
- High Precision: The average position error for the UAV was just 9.814 cm, significantly better than several other state-of-the-art methods compared in the study.
- Reliability: The height error remained between 1.26 and 1.76 meters, which is well within the acceptable range for capturing clear images of tower components.
Conclusion
This framework provides a robust solution for automating detailed inspections of high-voltage transmission lines. By combining 3D LiDAR point clouds with a "teach-and-repeat" route planning method and virtual "electronic fences," the researchers achieved significant efficiency gains and high-precision positioning. While the initial "teaching" phase still requires a skilled pilot, future iterations could involve fully autonomous waypoint identification using AI to recognize tower components from the point cloud.
Summary updated