Research method and application of source-fault-cap coupling oil and gas migration to overlying reservoir distribution

Xiaomei Li, Liang Yang, Lidong Sun, Jiajun Liu, Guozheng Li, Zhuang Cai, Bo Hu, Ying Du, Bowei Zhang, Fei Jiang, Jiao Zhang, Tian YanResearch Square 2025 · DOI

Introduction

In petroleum exploration, identifying source rocks is only the first step. The critical challenge lies in understanding the "plumbing" system—the pathways through which hydrocarbons migrate from source rocks to overlying reservoirs. This study introduces a comprehensive geological framework that integrates source rocks, faults, and caprocks—termed "source-fault-cap coupling"—to accurately predict oil and gas distribution in complex sedimentary basins.

The Challenge of Migration Modeling

Traditionally, researchers have analyzed source rocks, faults, and caprocks in isolation or as pairs. However, these models often fail to explain why oil accumulates in certain overlying reservoirs while bypassing others under similar conditions. The missing link is the simultaneous interaction between the hydrocarbon supply (source rock), the migration pathway (fault), and the sealing mechanism (caprock). A fault cutting through a caprock can either facilitate rapid migration or act as a slow leak, depending on the "ancient fault thickness" of the mudstone seal.

Methodology: The Source-Fault-Cap Coupling Framework

The proposed method utilizes a three-step superimposition approach to map migration pathways:

  1. Source-Fault Coupling: Researchers identify where faults intersect with oil supply areas. This involves analyzing both internal and external source rock supplies using drilling data and geochemical indicators, such as the $(S_1+S_2)/TOC$ ratio, to determine oil-generation thresholds.
  2. Fault-Cap Coupling: This step calculates the "ancient fault thickness" of the mudstone caprock. By subtracting the fault displacement during the primary migration period from the total caprock thickness, researchers can determine the seal's integrity.
  3. Integration and Classification: By overlaying these maps, migration is categorized into six distinct types based on the source of the supply and the migration speed (rapid vs. slow). Rapid migration occurs when the fault effectively breaches the seal (ancient fault thickness < 0), while slow migration occurs when the seal remains thin but intact.

Case Study: Qikou Sag, Bohai Bay Basin

The model was validated using a comprehensive dataset from the Qikou Sag in China’s Bohai Bay Basin. The study focused on the migration from the $Es_3$ source rock through the Nandagang fault and $Es_1^z$ mudstone caprock into the $Ed_2$ reservoir. Data included 3D seismic mapping for fault structures and geochemical analysis to establish an oil-generation threshold of approximately 3,600 meters.

Key Results and Validation

The application of this method to the Nandagang fault zone identified four of the six theoretical migration types.

  • Rapid Migration: Primarily found at observation points 4–6, 7–8, and 9–11.
  • Slow Migration: Found at points 2, 4, and 14–17.

The model’s predicted "favorable" zones (points 2, 4–11, and 14–17) showed a high degree of correlation with actual oil and gas discoveries in the $Ed_2$ formation, which are concentrated at points 2–3, 8, 11–12, and 17–18. This alignment confirms that the "form" of migration (rapid vs. slow) is a more reliable predictor of reservoir location than the mere presence of a fault.

Conclusion and Future Directions

The source-fault-cap coupling method provides a robust tool for predicting hydrocarbon distribution in sandstone-mudstone petroliferous basins characterized by tensile normal faults. While currently optimized for these environments, future research could adapt the framework for strike-slip or compressional fault systems and different lithologies, such as carbonate reservoirs. By refining the timing of fault activity, dynamic modeling could further enhance the precision of migration pathway evolution over geological time.

Summary updated

Abstract

<title>Abstract</title> Based on the study of the migration mechanism and form distribution of the source-fault-cap coupling oil and gas to the overlying reservoir, the source-fault coupling oil and gas migration parts of different types of sources are determined by using the oil and gas supply parts of different types of sources and the fracture migration parts;Using the relative thickness of ancient fault of mudstone caprock, the distribution position of fault-cap coupling oil and gas migration form is determined. The superposition of the two has established a set of research methods for the distribution of source-fault-cap coupling oil and gas migration to the overlying reservoir. It is used to study the distribution of oil and gas migration from the source rock of the third member of the Shahejie Formation (Es<sub>3</sub>), the Nandagang fault and the mudstone caprock of the middle sub-member of the first member of Shahejie Formation(E<sub>s1</sub><sup>z</sup>) to the third member of the Dongying Formation(Ed<sub>2</sub>) in the Qikou Sag of the Bohai Bay Basin. The results show that there are four types of oil and gas migration from the source rock of Es<sub>3</sub>, the Nandagang fault and the mudstone caprock of E<sub>s1</sub><sup>z</sup> to Ed<sub>2</sub>. The slow migration form of oil and gas, both inside and outside the source, to Ed<sub>2</sub>, is distributed exclusively at observation points 14–17. By contrast, the rapid migration form of oil and gas, outside the source, to Ed<sub>2</sub>, is primarily distributed at observation points 4–6, 7–8 and 9–11. The slow migration form of oil and gas outside the source to Ed<sub>2</sub> is primarily distributed at observation points 2 and 4. The slow migration form of oil and gas inside the source to the Ed<sub>2</sub> is predominantly distributed at observation point 17. The observation points 2, 4–6, 7–8, 9–11 and 14–17 appear to be particularly conducive to the accumulation of oil and gas, both inside and outside the source of the underlying Es<sub>3</sub> in Ed<sub>2</sub>. This observation is consistent with the distribution of oil and gas in Ed<sub>2</sub>, which is primarily concentrated at observation points 2–3, 8, 11–12, and 17–18, and is constrained by the Nandagang fault. It shows that this method is feasible to study the distribution of source-fault-cap coupling oil and gas migration to overlying reservoirs.
BibTeX
@inproceedings{li2025research,
  author = {Xiaomei Li and Liang Yang and Lidong Sun and Jiajun Liu and Guozheng Li and Zhuang Cai and Bo Hu and Ying Du and Bowei Zhang and Fei Jiang and Jiao Zhang and Tian Yan},
  title = {{Research method and application of source-fault-cap coupling oil and gas migration to overlying reservoir distribution}},
  booktitle = {Research Square},
  year = {2025},
  doi = {10.21203/rs.3.rs-7120734/v1},
}
Figure