Research and Simulation Analysis on a Novel U-Tube Type Dual-Chamber Oscillating Water Column Wave Energy Conversion Device

Shaohui Yang, Haijian Li, Yan Huang, Jianyu Fan, Zhichang Du, Yongqiang Tu, Chenglong Li, Beichen LinEnergies 2025 · DOI

TL;DR

This paper introduces a novel U-tube type dual-chamber oscillating water column (OWC) wave energy converter designed to be integrated into a marine vehicle's hull. By leveraging the vessel's motion, this device aims to overcome the corrosion and damage issues of traditional OWC systems, offering a more robust solution for harnessing wave energy. Numerical simulations reveal that device length and width significantly impact power output, while air chamber height and U-tube channel width have less influence.

What Problem Does This Paper Address?

Traditional oscillating water column (OWC) devices, while promising for wave energy conversion, are directly exposed to harsh marine environments. This exposure leads to significant challenges like corrosion and damage, limiting their long-term viability and operational efficiency. The authors propose a novel solution: integrating a U-tube dual-chamber OWC system inside a marine vehicle. This design aims to shield the OWC from direct seawater contact, thereby mitigating corrosion and damage risks. The device utilizes the vessel's natural pitching and rolling motions to drive the water column oscillations, generating airflow to power an air turbine. This approach seeks to enhance the reliability and applicability of OWC technology, particularly for integration into existing marine structures.

Methods

The core of this research relies on Computational Fluid Dynamics (CFD) simulations using the ANSYS Fluent software. The study employs the Volume of Fluid (VOF) model to track the interface between water and air, essential for simulating the oscillating water column. The k-ε turbulence model is used to capture the turbulent airflow within the chambers.

A key aspect of their methodology is a systematic parameter variation study. They investigate the impact of several structural dimensions on the device's aerodynamic power output. This includes:

  • Device Length (L)
  • Device Width (W)
  • Air Chamber Height (H)
  • U-tube Channel Width (T)
  • Bottom Channel Height (D)

To manage computational costs, a grid independence study was performed, settling on a mesh resolution of 0.6 million cells. The air turbine was simplified as an orifice plate for simulation purposes, with its ratio set to 1% of the air chamber cross-section, a value known to be optimal for OWC systems. The simulations were conducted under realistic sea conditions, focusing on low-frequency waves typical of China's coastal areas, with specific parameters for wave periods and significant wave heights. The vessel's motion was simulated by varying the sloshing angle (10° and 5°) and oscillation period (3s to 6s).

Datasets

Not discussed in the paper. The study relies on simulated data generated through CFD modeling based on defined physical parameters and sea conditions.

Key Insights and Ideas

  • Protection through Integration: The most significant conceptual contribution is the idea of integrating the OWC within a marine vehicle's hull. This elegantly addresses the durability and maintenance issues of traditional OWC designs by isolating them from direct seawater exposure.
  • Leveraging Vessel Motion: The design cleverly utilizes the inherent roll and pitch motions of a marine vessel, turning a potential problem (ship instability) into an energy source.
  • Length and Width are King: The simulations strongly suggest that increasing the overall length and width of the U-tube dual-chamber OWC device leads to a substantial increase in aerodynamic power output. This indicates that larger physical dimensions are a primary driver for enhanced energy generation.
  • Minor Impact of Chamber Dimensions: Conversely, variations in air chamber height and U-tube channel width showed a much smaller impact on the overall aerodynamic power. This suggests that while these dimensions are important, they are secondary to the overall device footprint (length and width) for maximizing power.
  • Bottom Channel Height Matters (at lower periods): Reducing the bottom channel height significantly enhanced aerodynamic power, particularly at lower oscillation periods. This highlights a specific design optimization that can boost performance.
  • Sloshing Angle is Crucial: A larger sloshing angle (vessel roll) directly translates to higher aerodynamic power, as it leads to greater water column displacement and faster oscillations.

Key Results

  • Optimal Length: A device length of 1400 mm yielded the highest aerodynamic power (26.8 W).
  • Optimal Width: A device width of 1400 mm also resulted in the highest aerodynamic power (27.6 W).
  • Optimal Air Chamber Height: An air chamber height of 500 mm provided the best performance (27.4 W), with diminishing returns beyond this point.
  • Optimal U-tube Channel Width: A width of 400 mm showed the best performance (32 W), particularly at lower oscillation periods.
  • Optimal Bottom Channel Height: A height of 100 mm was found to be optimal, achieving a peak aerodynamic power of 40 W.
  • Sloshing Angle Impact: A 10° sloshing angle generated significantly higher aerodynamic power (40 W) compared to a 5° angle (13.4 W).

Limitations and Future Work

  • Computational Constraints: The study acknowledges that due to computational limitations, it did not account for potential coupled and varying relationships among multiple parameters. This means the optimization was largely based on single-variable adjustments.
  • Simplified Turbine Model: The air turbine was modeled as a simple orifice plate, which simplifies the complex dynamics of a real turbine.
  • No Experimental Validation: The research is purely simulation-based. The authors explicitly state that future work will focus on manufacturing a physical prototype for semi-physical experimental verification.
  • Future Optimization: The authors plan to use optimization algorithms like Particle Swarm Optimization (PSO) to further refine prototype parameters for better power conversion efficiency.
  • Broader Wave Conditions: Future research will also investigate the influence of ship roll angle under different wave incidence directions and a wider range of sea states.

Summary updated

Abstract

With the development of wave energy, a promising renewable resource, oscillating water column (OWC) devices, has been extensively studied for its potential in harnessing this energy. However, traditional OWC devices face challenges such as corrosion and damage from prolonged exposure to harsh marine environments, limiting their long-term viability and efficiency. To address these limitations, this paper proposes a novel U-tube type dual chamber OWC wave energy conversion device integrated within a marine vehicle. The research involves the design of a U-tube dual-chamber OWC device, which utilizes the pitch motion of a marine vehicle to drive the oscillation of water columns within the U-tube, generating reciprocating airflow that drives an air turbine. Numerical simulations using computational fluid dynamics (CFD) were conducted to analyze the effects of various structural dimensions, including device length, width, air chamber height, U-tube channel width, and bottom channel height, on the aerodynamic power output. The simulations considered real sea conditions, focusing on low-frequency waves prevalent in China’s sea areas. Simulation results reveal that increasing the device’s length and width substantially boosts aerodynamic power, while air chamber height and U-tube channel width have minor effects. These findings provide valuable insights into the optimal design of U-tube dual-chamber OWC devices for efficient wave energy conversion, laying the foundation for future physical prototype development and experimental validation.
BibTeX
@inproceedings{yang2025research,
  author = {Shaohui Yang and Haijian Li and Yan Huang and Jianyu Fan and Zhichang Du and Yongqiang Tu and Chenglong Li and Beichen Lin},
  title = {{Research and Simulation Analysis on a Novel U-Tube Type Dual-Chamber Oscillating Water Column Wave Energy Conversion Device}},
  booktitle = {Energies},
  year = {2025},
  doi = {10.3390/en18154141},
}
Figure