Reproducible Thermo-Fluid–Solid-Coupled Modeling of Wet Milling of Al6061: Parametric Influence and Surface Integrity Assessment

Yanping Xiao, X.r. Wu, Xin Tong, Enqing Chen, Cheng ZhangMetals 2025 · DOI

TL;DR

This paper presents a novel 3D thermo-fluid-solid coupled simulation framework using the Coupled Eulerian-Lagrangian (CEL) method to accurately model the wet milling of Al6061. The study quantifies the impact of various machining parameters on cutting temperature, equivalent stress, and surface roughness, revealing coolant coverage as the most critical factor for surface integrity.

What Problem Does This Paper Address?

Machining aluminum alloys like Al6061 is crucial for industries such as aerospace and automotive due to their excellent strength-to-weight ratio. However, the presence of intermetallic compounds in these alloys can negatively affect surface quality and lead to defects. Wet milling, while common, involves complex interactions between thermal, fluid, and mechanical fields, making it challenging to predict and control cutting temperature, stress distribution, and ultimately, surface integrity. Existing simulation models often simplify these interactions, leading to inaccuracies, particularly concerning the dynamic behavior of coolant. This paper aims to bridge this gap by developing a more comprehensive and reproducible simulation framework that can accurately capture these coupled phenomena.

Methods

The core of this research is a three-dimensional Coupled Eulerian–Lagrangian (CEL) framework implemented in ABAQUS. In this approach:

  • Coolant is modeled using the Eulerian method, allowing it to flow freely and interact with the cutting zone.
  • The cutting tool and workpiece are modeled using the Lagrangian method, enabling them to undergo large deformations and material failure.

This CEL approach allows for the simulation of complex fluid-structure interactions, including the dynamic behavior of the coolant jet impinging on the workpiece and tool. The model incorporates the Johnson-Cook constitutive model to describe the material behavior of Al6061 under high strain rates and temperatures, including thermal softening and strain hardening. The simulation accounts for heat transfer at the fluid-solid interface using pressure-dependent thermal conduction properties. The study also designs a systematic experimental plan to investigate the influence of key parameters and uses optical profilometry to measure surface roughness (Ra and Sa) for trend validation.

Datasets

The paper does not introduce new datasets for training machine learning models. Instead, it relies on:

  • Material properties for Al6061 and the tungsten carbide tool, compiled and adapted from existing literature (Tables 1, 2, and 3).
  • Experimental data generated specifically for this study on Al6061 workpieces under various machining conditions, used for surface roughness measurement and trend validation against simulation results.

Key Insights and Ideas

  • Coolant Coverage is King: The most striking insight is that the coverage of the cutting zone by the coolant, rather than just the nominal flow rate, is the dominant factor influencing surface integrity. This highlights the importance of nozzle design and placement.
  • Interplay of Parameters: The study reveals complex, sometimes counterintuitive, interactions between machining parameters. For instance, while higher feed rates increase cutting temperature, they can paradoxically reduce equivalent stress due to thermal softening.
  • Reproducibility Matters: The authors emphasize the development of a "reproducible methodology," detailing the modeling assumptions and workflow, which is crucial for future experimental-numerical verification and broader adoption.
  • CEL for Dynamic Coolant: The application of the CEL method is a key innovation, enabling a more realistic simulation of coolant dynamics compared to simpler convective heat transfer boundary conditions.

Key Results

The study systematically analyzed the impact of four key parameters:

  • Feed Rate: Higher feed rates significantly increase peak cutting temperature ($T_{peak}$) (+12.9%) but reduce equivalent stress ($\sigma_{eq}$) (-22.7%), while deteriorating surface quality (Ra +104.2%, Sa +29.9%).
  • Spindle Speed: Increasing spindle speed lowers both $T_{peak}$ (-2.2%) and $\sigma_{eq}$ (-8.5%), and improves surface finish (Ra -39.3%, Sa -16.6%).
  • Axial Cutting Depth: A greater depth of cut amplifies mechanical and thermal loads, increasing $T_{peak}$ (+10.3%) and $\sigma_{eq}$ (+17%).
  • Coolant Flow Rate: Enhanced coolant flow significantly reduces $T_{peak}$ (-23.5%) and $\sigma_{eq}$ (-6.1%), and markedly improves surface quality (Ra -88.8%, Sa -51.3%). Specifically, turbulent flow (high velocity) was found to be most effective.

The study also found that axial cutting depth is the primary driver for equivalent stress, while coolant coverage is paramount for surface roughness.

Limitations and Future Work

  • Lack of Direct Experimental Validation: The authors explicitly state that experimental data for $T_{peak}$ and $\sigma_{eq}$ were not directly validated in this study. This is a significant limitation.
  • Coolant Coverage Measurement: The quantitative measurement of coolant coverage in experiments was not performed.
  • J-C Model Limitations: The Johnson-Cook constitutive model, while effective, is empirical and does not capture phenomena like precipitation evolution or dynamic recrystallization.
  • Future Work Suggestions:
    • Employ high-speed visualization and image processing to quantify wetted area fraction experimentally.
  • Conduct point-to-point verification and parameter calibration using advanced thermal strain measurement systems.
  • Investigate the influence of nozzle angle, nozzle-to-cutting-head distance, and their interaction with spindle speed.
  • Correlate simulation results with experimental XRD residual stress profiling.
  • Explore more advanced material models that can capture precipitation evolution.

Summary updated

Abstract

Wet milling of aluminum alloys involves complex interactions among thermal, fluid, and mechanical fields that strongly affect cutting temperature, stress distribution, and surface integrity. To achieve reproducible and physics-based predictions of these coupled phenomena, this study develops a three-dimensional thermo–fluid–solid-coupled Eulerian–Lagrangian (CEL) framework for the wet milling of Al6061. The model system in this study evaluated the effects of milling cutter feed rate and spindle speed, feed per tooth of the milling cutter, axial cutting depth, and coolant flow rate on equivalent stress and peak milling temperature., as well as their correlation with surface roughness metrics (Ra, Sa). Simulation results reveal that higher feed rates significantly raise Tpeak (+12.9%) while reducing σeq (−22.7%) and deteriorating surface quality (Ra +104.2%, Sa +29.9%). Increasing spindle speed lowers both Tpeak (−2.2%) and σeq (−8.5%) and improves surface finish (Ra −39.3%, Sa −16.6%). A greater depth of cut amplifies mechanical and thermal loads, increasing Tpeak (+10.3%) and σeq (+17%). Enhanced coolant flow reduces Tpeak (−23.5%) and σeq (−6.1%) and markedly improves surface quality (Ra −88.8%, Sa −51.3%). Research findings indicate that coolant coverage is the dominant factor determining surface integrity. Although experimental data for Tpeak and σeq were not directly validated, this framework clearly articulates modeling assumptions, quantifies parameter sensitivities, and provides a reproducible methodology for future experimental-numerical verification.
BibTeX
@inproceedings{xiao2025reproducible,
  author = {Yanping Xiao and X.R. Wu and Xin Tong and Enqing Chen and Cheng Zhang},
  title = {{Reproducible Thermo-Fluid–Solid-Coupled Modeling of Wet Milling of Al6061: Parametric Influence and Surface Integrity Assessment}},
  booktitle = {Metals},
  year = {2025},
  doi = {10.3390/met15111256},
}
Figure