Regulating effect of biaxial strain on electronic, optical and photocatalytic properties in promising X2PAs (X = Si, Ge and Sn) monolayers

Qiwen He, Yang Wu, Chunhua Yang, Hena Zhang, Dai-Song Tang, Cailong Liu, Xiaochun WangarXiv 2022 · DOI · arXiv

Abstract

Photocatalytic water splitting offers a promising route to renewable hydrogen energy, yet efficiency is often limited by the recombination of photogenerated carriers. This study explores a new class of 2D Janus monolayers—$X_2PAs$ ($X = Si, Ge, Sn$)—using first-principles calculations. These materials possess an intrinsic internal electric field that naturally separates the Hydrogen Evolution Reaction (HER) and Oxygen Evolution Reaction (OER) to opposite surfaces. Furthermore, we demonstrate that biaxial strain can act as a "piezo-photocatalytic switch," allowing these monolayers to be tuned for specific redox reactions or full water splitting, providing a versatile platform for adaptable clean energy production.

The Challenge of Photocatalytic Water Splitting

Using sunlight to split water into hydrogen and oxygen is a cornerstone of the transition to clean energy. However, two major hurdles persist: harvesting a sufficient portion of the solar spectrum and preventing the immediate recombination of produced hydrogen and oxygen. If these gases are produced at the same physical site, they often react back into water, wasting the harvested energy.

This research addresses these challenges by investigating Janus monolayers, which feature different atomic species on their top and bottom surfaces. This inherent asymmetry creates a built-in dipole and an internal electric field, which can be leveraged to drive electrons and holes toward different physical locations.

Structural Design and the Janus Advantage

The researchers modeled $Si_2PAs$, $Ge_2PAs$, and $Sn_2PAs$ monolayers. As shown in the structural models, the top layer consists of Arsenic (As) while the bottom layer is Phosphorus (P), with the group-IV element ($X$) sandwiched in between.

Top and side views of the Janus $X_2PAs$ monolayer structure, highlighting the asymmetric arrangement of As and P atoms.

This structural asymmetry results in a significant electrostatic potential difference (0.26 to 0.31 eV) between the two surfaces. This potential acts as a "slide" for charge carriers: photogenerated electrons migrate toward the Phosphorus side to drive the HER, while holes move toward the Arsenic side to drive the OER. This spatial separation is crucial for preventing product recombination.

Electronic and Photocatalytic Performance

Using high-accuracy HSE06 hybrid functional calculations, the study found that all three strain-free monolayers are semiconductors with indirect band gaps ranging from 1.75 eV ($Ge_2PAs$) to 1.96 eV ($Si_2PAs$). These gaps are ideal for absorbing visible light, with absorption coefficients reaching up to $10^5 \text{ cm}^{-1}$, comparable to high-performance perovskites.

Electronic band structures, density of states (DOS), and spatial distribution of CBM and VBM for $Si_2PAs$, $Ge_2PAs$, and $Sn_2PAs$ monolayers.

As visualized in the charge density plots (Figure 3c, f, i), the Conduction Band Minimum (CBM) and Valence Band Maximum (VBM) are localized on different atomic layers. This confirms that the internal electric field effectively segregates the charge carriers required for the separate halves of the water-splitting reaction.

The Piezo-Photocatalytic Switch

A key finding of this work is the high sensitivity of these materials to mechanical strain. By applying biaxial strain from -4% (compression) to +4% (tension), the band edge positions can be shifted relative to the water redox potentials.

  • At -4% strain: The material becomes specialized for hydrogen production (HER only).
  • At +4% strain: It switches to an oxygen production specialist (OER only).
  • Under low strain (-3% to +1%): It maintains the ability to perform the full water-splitting reaction.

Among the candidates, $Sn_2PAs$ emerged as the most "tunable" due to its lower Young's modulus, making it an ideal candidate for flexible, strain-controlled photocatalytic devices.

Conclusion and Future Outlook

$X_2PAs$ monolayers represent a promising new class of piezo-photocatalysts that solve the product separation problem through intrinsic structural asymmetry. While these theoretical results are encouraging, future work must address kinetic overpotentials and experimental stability in aqueous environments. If successfully synthesized, these materials could provide a highly adaptable platform for solar-to-hydrogen energy conversion.

Summary updated

Abstract

Photocatalytic water splitting is an effective way to obtain renewable clean energy. The challenge is to design tunable photocatalyst to meet the needs in different environments. At the same time, the oxygen and hydrogen evolution reactions (OER and HER) on the photocatalyst should be separated, which will be conducive to the separation of products. The electronic, optical and photocatalytic properties of Janus X2PAs (X = Si, Ge and Sn) monolayers are explored by first-principles calculation. All the strain-free X2PAs monolayers exhibit excellent photocatalytic properties with suitable band edge positions straddling the standard redox potential of water and large visible light absorption coefficients (up to 105 cm-1). Interestingly, the intrinsic internal electric field is favorable for separating photogenerated carriers to different surfaces of the monolayer. It contributes to realize the OER and HER separated on different sides of the monolayer. In particular, the energy band edge positions of X2PAs monolayers can be well adjusted by biaxial strain. Then it can effectively modulate photocatalytic reactions, suggesting X2PAs monolayers can be a piezo-photocatalytic switch between the OER, HER and full-reaction of redox for water splitting. This investigation not only highlights that the photocatalyst X2PAs monolayers with the separated OER and HER can be effectively tuned by the mechanical strain, but also provides a new strategy for designing highly adaptable and tunable piezo-photocatalysts.
BibTeX
@misc{he2022regulating,
  author = {Qiwen He and Yang Wu and Chunhua Yang and Hena Zhang and Dai-Song Tang and Cailong Liu and Xiaochun Wang},
  title = {{Regulating effect of biaxial strain on electronic, optical and photocatalytic properties in promising X2PAs (X = Si, Ge and Sn) monolayers}},
  year = {2022},
  eprint = {2209.04099},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2209.04099},
}
Figure