Abstract
Downward migration of knee exoskeletons under external forces is one major concern against their normal operations. It may be reduced by increasing the friction between exoskeletons and the human thigh. However, the effectiveness of friction control remains questionable, as the natural inverted-cone shape of the human thigh will aggravate downward migration, and the overwhelming strapping intensity will degrade the activation level of muscles. In this paper, we propose a new suspension system called the Dynamic Waist Strap. Theoretical analysis and experimental validations on multiple subjects are conducted to show its advantages over the three mainstream suspension systems commonly used for knee exoskeletons in terms of the reduction of migration, interaction torque, and maximum dip angle. This study highlights the importance of the suspension system when attaching a knee exoskeleton to the human and introduces a new dynamic interaction interface to improve the coupling from a knee exoskeleton to an individual.
Introduction
Knee exoskeletons, whether rigid or soft, are designed to assist human movement by applying torque across the joint. However, they face a persistent mechanical challenge: downward migration. Due to the inverted-cone shape of the human thigh and the forces of gravity and mechanical assistance, these devices naturally slide toward the knee during use.
To counteract this, users often resort to over-tightening thigh straps. This "brute force" approach is problematic, as it restricts muscle expansion, causes discomfort, and can lead to pain. Existing suspension systems—such as static webbing straps anchored to a waist belt—often fail because they go slack or become excessively tight as the hip rotates during a gait cycle. This paper introduces a "Dynamic Waist Strap" designed to provide consistent upward tension without hindering natural movement.
The Dynamic Waist Strap (C4)
The proposed Dynamic Waist Strap (C4) addresses the limitations of static systems through a "constant perimeter" principle. While the individual distances between the waist and thigh change during hip flexion and extension, the sum of the anterior and posterior distances remains relatively constant if the interface can slide.
The C4 system utilizes a continuous wire loop that passes through low-friction sheaths on a robust rock-climbing waist belt. As the wearer flexes their hip, the wire loop slides through the sheaths, transferring "slack" from the front to the back (and vice versa during extension). This dynamic length compensation maintains a constant upward pulling force throughout the entire gait cycle. The prototype also incorporates "BOA" dial units, allowing users to fine-tune initial tension for optimal comfort and stability.
Experimental Evaluation
The researchers compared the Dynamic Waist Strap (C4) against three mainstream suspension methods: a single lateral strap (C1), a frontal zonary structure (C2), and separate anterior/posterior static straps (C3).
The evaluation involved five healthy subjects (mean age 22.6). Data was collected using a 12-camera motion capture system, an instrumented treadmill, and load cells. Trials included level-ground walking at various speeds (0.7 to 1.1 m/s) and assistance forces (60N to 100N), as well as static posture tests at specific hip angles.
Key Results
The experimental results demonstrated significant improvements with the C4 system across all primary metrics:
- Migration Reduction: C4 reduced downward sliding by 62.0% to 82.2% compared to the other systems during walking.
- Lower Interaction Torque: The resistance felt by the wearer was reduced by 39.9% to 53.0%, indicating a more "transparent" and comfortable user experience.
- Enhanced Stability: The maximum dip angle (tilting) of the thigh cuff was significantly lower in C4 than in the lateral-only C1 system, ensuring the exoskeleton remained properly aligned with the leg's axis.
- Consistency: Statistical analysis confirmed that the C4 system's performance was robust across different walking speeds and subject body shapes.
Conclusion and Future Work
The Dynamic Waist Strap represents a significant advancement in exoskeleton suspension, prioritizing "transparency" and stability. By allowing the interface to adapt dynamically to hip kinematics, it avoids the pitfalls of static over-tightening.
While the results are promising, future research should expand the sample size and test the system on more complex terrains, such as stairs or slopes. Additionally, long-term wearability studies are needed to assess mechanical durability and skin comfort over extended periods. Quantifying the ideal pre-tension for the wire loop also remains an area for further refinement.
Summary updated