Reconfigured-Wafer-to-Wafer 3-D Integration Using Parallel Self-Assembly of Chips With Cu–SnAg Microbumps and a Nonconductive Film

Takafumi Fukushima, J. C. Bea, Hisashi Kino, C. Nagai, M. Murugesan, H. Hashiguchi, Kangwook Lee, Tetsu Tanaka, Mitsumasa KoyanagiIEEE Transactions on Electron Devices 2014 · DOI

Abstract

A new 3-D integration concept based on reconfigured wafer-to-wafer stacking is proposed. Using reconfigured wafer-to-wafer 3-D integration, many known-good dies (KGDs) can be simultaneously and precisely self-assembled by water surface tension onto a carrier wafer, which is called a reconfigured wafer. In addition, the KGDs on the reconfigured wafer can be transferred and bonded to another target wafer at the wafer level. The alignment accuracy is within 1 μm when 3 × 3-, 5 × 5-, 4 × 9,- or 10 × 10- mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> chips are employed. To 3-D stack many KGDs in a batch process, we developed and employed a self-assembly multichip bonder. KGDs with 20- μm-pitch Cu-SnAg microbumps covered with a nonconductive film as a preapplied underfill material on their top surface were self-assembled right-side up, and then transferred to the corresponding target interposer wafer upside down. The resulting daisy chain with 500 Cu-SnAg microbumps exhibited ohmic contacts, and the resistance of ~ 40 mΩ/bump was sufficiently low for 3-D large-scale integration application.
BibTeX
@article{fukushima2014reconfigured,
  author = {Takafumi Fukushima and J. C. Bea and Hisashi Kino and C. Nagai and M. Murugesan and H. Hashiguchi and Kangwook Lee and Tetsu Tanaka and Mitsumasa Koyanagi},
  title = {{Reconfigured-Wafer-to-Wafer 3-D Integration Using Parallel Self-Assembly of Chips With Cu–SnAg Microbumps and a Nonconductive Film}},
  journal = {IEEE Transactions on Electron Devices},
  year = {2014},
  doi = {10.1109/ted.2013.2294831},
}

Loading related content...

Figure