Recent Progress in the Development of Graphene Detector for Terahertz Detection

Jianlong Liu, Xin Li, Ruirui Jiang, Kaiqiang Yang, Jing Zhao, Sayed Ali Khan, Jiancheng He, Peizhong Liu, Jinfeng Zhu, Baoqing ZengSensors 2021 · DOI · OpenReview

TL;DR

Graphene's unique electronic properties make it a promising material for terahertz (THz) detectors. This review summarizes recent advancements in graphene-based THz detectors, exploring various detection mechanisms like photovoltaic, photothermoelectric, and plasma wave resonance, and highlighting progress in fabrication methods.

What Problem Does This Paper Address?

The terahertz (THz) frequency range (0.1-10 THz) is a fascinating region between electronics and photonics, offering unique capabilities for communication, imaging, and sensing due to its ability to penetrate many non-polar materials and its low photon energy. However, developing efficient and sensitive THz detectors has been a significant challenge. Traditional detectors like bolometers, pyroelectric detectors, and Schottky diodes have limitations in terms of response speed, sensitivity, or operating conditions. Graphene, with its exceptional electron mobility, zero bandgap, and broadband absorption, presents a compelling alternative material for overcoming these limitations and enabling next-generation THz applications. This paper aims to provide a comprehensive overview of the recent progress in developing graphene-based THz detectors, categorizing them by their underlying detection mechanisms and fabrication methods.

Methods

This review focuses on the detection mechanisms employed by graphene THz detectors. The primary mechanisms discussed are:

  • Photovoltaic (PV) Effect: Exploits the generation of electron-hole pairs upon THz absorption, which are then separated by a built-in electric field to create a photocurrent.
  • Photothermoelectric (PTE) Effect: Relies on the temperature gradient created by THz absorption, leading to a thermoelectric voltage due to differences in carrier concentration.
  • Bolometric Effect: Detects THz radiation by measuring the change in resistance of a material as its temperature increases due to absorbed energy.
  • Plasma Wave Resonance: Utilizes the excitation of plasmonic waves in the graphene channel of field-effect transistors (FETs), where resonance leads to a detectable voltage or current.

The paper also discusses various graphene preparation methods, including:

  • Mechanical Exfoliation: The original method, yielding high-quality graphene but difficult to scale.
  • Chemical Vapor Deposition (CVD): Allows for large-area, cost-effective graphene production, though transfer processes can introduce defects.
  • SiC Epitaxial Growth: Directly grows graphene on SiC substrates, offering good quality and integration potential.

Datasets

Not discussed in the paper.

Key Insights and Ideas

  • Graphene's Versatility: Graphene's unique properties (high mobility, zero bandgap, tunable conductivity) make it adaptable to multiple THz detection mechanisms, offering flexibility in detector design.
  • Beyond Traditional Detectors: Graphene-based detectors are pushing the boundaries of sensitivity and response speed, potentially surpassing conventional technologies in specific applications.
  • Mechanism Synergy: Combining different detection mechanisms (e.g., PV and PTE) can lead to enhanced detector performance.
  • Antenna Integration is Crucial: Coupling graphene detectors with antennas (e.g., bow-tie, log-periodic) is vital for efficient THz wave coupling, absorption, and improved responsivity.
  • Fabrication Matters: The method of graphene preparation and device fabrication significantly impacts detector performance, with challenges in achieving high mobility, low contact resistance, and defect-free integration.

Key Results

The paper highlights a range of performance metrics for graphene THz detectors:

  • Responsivity: Detectors have demonstrated responsivities from tens to thousands of V/W, with some achieving up to 764 V/W [112] and even theoretical potentials for 100 kV/W.
  • Noise-Equivalent Power (NEP): NEP values have reached as low as 10 pW/Hz¹/² [70] and even down to 0.2 pW/Hz¹/² [67] and 0.1 pW/Hz¹/² [126] in some cases, indicating high sensitivity.
  • Response Time: Detectors can achieve response times in the picosecond range, enabling real-time detection.
  • Working Frequency: While many detectors operate in the low-frequency THz range (0.1-10 THz), there's ongoing research to extend this to higher frequencies.
  • Room Temperature Operation: A significant focus is on achieving high performance at room temperature, reducing the need for cryogenic cooling.

Limitations and Future Work

The authors acknowledge several challenges and suggest future research directions:

  • Graphene Preparation Limitations: Mechanical exfoliation is difficult to scale, CVD requires transfer processes that can introduce defects, and SiC epitaxy has high substrate costs and growth challenges. Future work should focus on scalable, high-quality graphene synthesis.
  • Device Fabrication Challenges: Parasitic capacitance and access resistance from antenna coupling and electrode interfaces need to be minimized. Improving impedance matching and reducing contact resistance are critical.
  • Working Range Extension: While progress has been made, achieving high-frequency THz detection remains a challenge.
  • Room Temperature Performance: While many detectors operate at room temperature, further improvements in sensitivity and response speed are needed to match cryogenic performance.
  • Substrate Influence: The choice of substrate material (e.g., SiC, diamond) and its properties can significantly impact detector performance. Research into optimized substrates and encapsulation (e.g., hBN) is ongoing.
  • Antenna Optimization: Further development of antenna designs is crucial for efficient THz coupling, spectral range extension, and improved detector efficiency.

Summary updated

Abstract

Terahertz waves are expected to be used in next-generation communications, detection, and other fields due to their unique characteristics. As a basic part of the terahertz application system, the terahertz detector plays a key role in terahertz technology. Due to the two-dimensional structure, graphene has unique characteristics features, such as exceptionally high electron mobility, zero band-gap, and frequency-independent spectral absorption, particularly in the terahertz region, making it a suitable material for terahertz detectors. In this review, the recent progress of graphene terahertz detectors related to photovoltaic effect (PV), photothermoelectric effect (PTE), bolometric effect, and plasma wave resonance are introduced and discussed.
BibTeX
@article{liu2021recent,
  author = {Jianlong Liu and Xin Li and Ruirui Jiang and Kaiqiang Yang and Jing Zhao and Sayed Ali Khan and Jiancheng He and Peizhong Liu and Jinfeng Zhu and Baoqing Zeng},
  title = {{Recent Progress in the Development of Graphene Detector for Terahertz Detection}},
  journal = {Sensors},
  year = {2021},
  doi = {10.3390/s21154987},
}
Figure