Receiver-Resolution APS-PDP Maps for Wireless Channels: Benchmarking and Coarse-to-Fine Modeling

Peilin Zheng, Haozhe Jia, Xiucheng Wang, Wenshuo Chen, Nan ChengarXiv 2026 · arXiv

TL;DR

This paper introduces UrbanADPSMap, a new benchmark that bridges the gap between theoretical ray-tracing and practical wireless receivers by providing fixed-grid spectral targets. To model these complex spectra, the authors propose SpecFlowAR, a generative model that uses multi-scale flow matching to synthesize high-fidelity wireless channel maps from coarse structures to fine, decision-critical details.

What Problem Does This Paper Address?

In modern high-frequency wireless systems (like 5G-Advanced and 6G), performance depends on how signal power is distributed across different angles (Angle Power Spectrum, APS) and time delays (Power Delay Profile, PDP). These spectra are essential for selecting the best antenna beams and equalizing wideband signals.

Traditionally, researchers use ray-tracing to generate "Multipath Component (MPC) lists"—essentially a list of every single bounce a signal takes. However, real-world hardware has limits: antenna arrays have finite apertures (angular resolution), and systems have finite bandwidth (delay resolution).

The authors argue that training AI on raw MPC lists is problematic because it ignores these hardware constraints, leading to ambiguous learning targets and inconsistent evaluations. If two researchers use different methods to "reconstruct" a spectrum from the same MPC list, their results aren't truly comparable.

Methods

The paper proposes a two-part solution:

1. UrbanADPSMap: A Standardized Benchmark

The authors "rasterize" raw ray-tracing data into a format practical receivers can actually "see." They apply explicit response kernels:

  • Delay: A sinc kernel models bandwidth limits.
  • Angle: A normalized Uniform Linear Array (ULA) response models aperture limits. By fixing the grid, kernels, and a "validity mask" (to ignore empty areas), they create a stable, reproducible target for machine learning models.

2. SpecFlowAR: Coarse-to-Fine Generation

To synthesize these maps, the authors developed SpecFlowAR. Instead of predicting the entire high-resolution spectrum at once, it uses a multi-scale autoregressive flow matching approach:

  • The Pyramid: The model first generates a "coarse" version of the spectrum (the general envelope of signal dispersion).
  • The Scaffold: This coarse output acts as a "scaffold" for the next level, where the model adds finer details like sharp peaks (critical for beam alignment) and low-power tails (critical for dispersion statistics).
  • Flow Matching: Unlike standard diffusion models, flow matching learns the direct "velocity" needed to transform noise into the target data, which is often more efficient.
Figure 2: Coarse-to-fine multi-scale generator in SpecFlowAR. The condition encoder transforms I into global context cg and spatial tokens cs. A (K+1)-level autoregressive pyramid samples from coarse envelopes to full-resolution spectra via scale-wise conditional flow matching, where each scale is conditioned on the upsampled scaffold from the previous one.

Datasets

The authors introduce UrbanADPSMap, a massive dataset containing:

  • 50 urban scenes with 2.5 million total Tx-Rx links.
  • Standardized carrier frequency (2.4 GHz), bandwidth (200 MHz), and antenna configurations.
  • Fixed-grid targets for both APS and PDP.

Key Insights and Ideas

  • Pointwise Error is Deceptive: A model might have a low average error (RMSE) but fail to predict the exact location of a sharp peak. In wireless, missing the peak means missing the beam alignment entirely. SpecFlowAR prioritizes these "decision-aligned" features.
  • The Multi-Scale Advantage: By separating the "where is the power?" (coarse) from "how sharp is the peak?" (fine), the model avoids the blurring common in single-shot regression models.
  • Compute Control: The number of function evaluations (NFE) can be adjusted. This allows engineers to trade off between how fast the model runs and how high the spectral quality is.
Figure 3: Representative receiver-resolution targets in UrbanADPSMap. Left: condition tensor I with Tx and queried Rx on the occupancy map. Middle: receiver-resolution PDP. Right: receiver- resolution APS. LoS and NLoS links differ in peak location, angular spread, delay onset, and low-power tail structure.

Key Results

SpecFlowAR was tested against several baselines, including standard U-Nets and Diffusion Transformers (DiT):

  • Beam Utility: It achieved a Beam Power Loss (BPL@5) of 2.03 dB, significantly better than the deterministic geometry baseline (6.32 dB) and other neural models.
  • Dispersion Accuracy: It reduced errors in 3GPP-standard statistics like Azimuth Spread of Arrival (ASA) and Delay Spread (DS), which are vital for network planning.
  • Efficiency: Under a fixed budget of 80 evaluations (NFE=80), SpecFlowAR provided a better balance of spectral fidelity and decision accuracy than single-scale models.

Limitations and Future Work

  • Hardware Specificity: The current benchmark is tied to a specific receiver configuration (bandwidth, array size). While this is necessary for benchmarking, real-world deployment involves diverse hardware.
  • Urban Focus: The dataset is currently limited to urban environments. Extending this to indoor or rural settings would be a logical next step.
  • Calibration: The authors note that future work should involve calibrating these synthetic choices against measured, real-world channel data to further improve "sim-to-real" transfer.

Summary updated

Abstract

Angle Power Spectrum (APS) and Power Delay Profile (PDP) are receiver-facing spectra that govern beam selection and wideband equalization. Most ray-tracing benchmarks provide supervision as variable-size multipath component lists. This format does not match practical receivers, whose angular and delay resolutions are limited by array aperture and system bandwidth. As a result, learning targets are ambiguous and evaluations can change with reconstruction conventions. We introduce UrbanADPSMap, a benchmark that converts ray-traced supervision into fixed-grid APS and PDP targets by explicitly modeling bandwidth-limited and aperture-limited response kernels. By fixing the receiver-domain kernels, discretization, and validity mask, UrbanADPSMap removes reconstruction-induced target ambiguity and stabilizes downstream evaluation across methods. Built on this benchmark, we propose SpecFlowAR, a coarse-to-fine generator based on multi-scale autoregressive flow matching. The model first captures coarse dispersion structure and then refines beam-relevant peaks and low-power tails. The number of function evaluations controls the sampling budget, enabling latency and quality to be adjusted for dense spectrum queries. Experiments on the test set show that SpecFlowAR reduces BPL@5 to 2.03 dB under a unified NFE=80 budget, while improving beam utility and reducing errors of 3GPP dispersion statistics.
BibTeX
@misc{zheng2026receiver,
  author = {Peilin Zheng and Haozhe Jia and Xiucheng Wang and Wenshuo Chen and Nan Cheng},
  title = {{Receiver-Resolution APS-PDP Maps for Wireless Channels: Benchmarking and Coarse-to-Fine Modeling}},
  year = {2026},
  eprint = {2611.10581},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2611.10581},
}
Figure