Real‐time black‐blood MRI using spatial presaturation

Krishna S. Nayak, Pedro A. Rivas, John M. Pauly, Greig Scott, Adam B. Kerr, Bob S. Hu, Dwight G. NishimuraJournal of Magnetic Resonance Imaging 2001 · DOI

TL;DR

This paper introduces a novel real-time MRI technique that effectively suppresses blood signal, leading to clearer visualization of cardiac and vascular structures. By using "spatial presaturation" pulses before each image acquisition, the system significantly reduces flow artifacts, improving diagnostic capabilities for both cardiac wall-motion studies and intravascular imaging.

What Problem Does This Paper Address?

In real-time MRI, particularly for cardiac and vascular imaging, the signal from flowing blood can obscure important anatomical details and create disruptive artifacts. Traditional "black-blood" techniques, while effective at suppressing blood, often require long preparation times (long TR), making them unsuitable for the rapid frame rates needed for real-time imaging. Existing real-time methods that rely on flow suppression can struggle with slow through-plane flow and can reduce image contrast. The challenge, therefore, is to achieve robust blood suppression in real-time without compromising image quality or speed.

Methods

The core innovation is a real-time MRI pulse sequence that incorporates "spatial presaturation." This technique involves exciting and dephasing blood in slabs outside the intended imaging slice just before each imaging excitation.

Here's a breakdown of the key components:

  • Spatial Presaturation: This is the heart of the method. Two slab-selective radiofrequency (RF) pulses are applied, followed by a dephasing gradient in the slice-select direction. This effectively "nulls" the signal from blood within these presaturation slabs. The goal is to dephase blood before it enters the imaging slice.
  • Sharp-Profiled RF Pulses: The authors emphasize the use of "sharp-profiled" RF saturation pulses. These are designed using advanced RF pulse design tools (Shinnar-Le Roux technique) to create precise saturation bands. Longer pulses (e.g., 4 msec) can produce sharper profiles, allowing the presaturation slabs to be placed closer to the imaging slice, which is crucial for suppressing slow through-plane flow.
  • Real-Time Interactive System: The sequence was integrated into an existing real-time interactive MRI system. This allows for interactive control over parameters like saturation slab thickness, placement, and flip angle, enabling on-the-fly adjustments.
  • Imaging Acquisition: The imaging portion of the sequence uses water-selective spectral-spatial excitation (to suppress lipid signal) and interleaved spiral acquisitions. Spiral imaging is chosen for its efficiency in k-space coverage and its ability to reduce motion artifacts.
  • Steady-State: The presaturation is applied within every TR (repetition time), ensuring a steady-state condition for stationary tissues. This is important for consistent image intensity.

Datasets

Not discussed in the paper. The paper focuses on the development and evaluation of the pulse sequence using phantom, animal, and human volunteer studies.

Key Insights and Ideas

  • Spatial Presaturation as a Real-Time Solution: The paper demonstrates that spatial presaturation, when implemented with sharp RF profiles, is a viable and effective method for achieving black-blood contrast in real-time MRI, overcoming the limitations of traditional double inversion techniques for speed.
  • Importance of RF Pulse Design: The quality of the saturation pulse profile directly impacts the effectiveness of blood suppression, especially for slow through-plane flow. Sharper profiles allow for closer placement of saturation slabs, improving suppression.
  • Trade-offs in Pulse Design: Longer RF pulses create sharper profiles but also introduce a delay that allows for T1 recovery in the first saturated slab. This can be compensated for by slightly increasing the flip angle of the first pulse or by using a single modulated pulse for both slabs (though this reduces independent control).
  • Real-Time Adaptability is Key: Integrating this technique into an interactive system allows clinicians to dynamically adjust parameters, making it more practical for diverse clinical scenarios.
  • Dual Application Potential: The technique shows promise for both improving cardiac wall-motion visualization (by enhancing endocardial border definition) and reducing artifacts in intravascular imaging.

Key Results

  • Improved Endocardial Border Definition: In real-time cardiac wall-motion studies, the black-blood technique significantly improved the definition of the endocardial border during systole, particularly in challenging segments.
  • Enhanced Contrast-to-Noise Ratio (CNR): CNR analysis showed a substantial increase in blood-myocardium contrast (from an average of 1.02 for white-blood to 5.27 for black-blood in specific regions).
  • Flow Artifact Elimination: In phantom studies, the technique nearly eliminated flow artifacts, preserving the signal from static structures.
  • In Vivo Intravascular Imaging: In rabbit aorta experiments, the black-blood sequence significantly reduced pulsatile flow and respiratory motion artifacts, leading to much clearer visualization of the vessel wall.
  • Frame Rates: While presaturation adds a fixed cost (7-11 msec per TR), the overall scan efficiency can be maintained by using longer readouts. Image acquisition rates ranged from 1-12.5 images/second, with reconstruction enabling display rates up to 25 images/second.

Limitations and Future Work

  • Slow Flow Suppression: The authors acknowledge that very slow through-plane flow might not be fully suppressed by spatial presaturation. They suggest that improved saturation pulse design could address this.
  • Noise: Noise is a fundamental limitation in real-time MRI, impacting image quality. The development of newer, more targeted receiver coils or coil arrays is proposed as a solution.
  • Frame Rates: The presaturation step inherently increases the TR, leading to reduced frame rates compared to non-black-blood sequences.
  • Future Applications: The authors suggest that with improved resolution and suppression pulse design, applications like real-time valve imaging could become feasible. They also highlight the benefit of being able to switch to a black-blood mode for specific challenging segments during real-time cardiac evaluation.

Summary updated

Abstract

A real-time interactive black-blood imaging system is described. Rapid blood suppression is achieved by exciting and dephasing slabs outside the imaging slice before each imaging excitation. Sharp-profiled radio frequency saturation pulses placed close to the imaging slice provide good blood suppression, even in views containing slow through-plane flow. In vivo results indicate that this technique improves endocardial border definition during systole in real-time cardiac wall-motion studies. Phantom and animal results indicate that this technique nearly eliminates flow artifacts in real-time intravascular studies. J. Magn. Reson. Imaging 2001;13:807-812.
BibTeX
@article{nayak2001realtime,
  author = {Krishna S. Nayak and Pedro A. Rivas and John M. Pauly and Greig Scott and Adam B. Kerr and Bob S. Hu and Dwight G. Nishimura},
  title = {{Real‐time black‐blood MRI using spatial presaturation}},
  journal = {Journal of Magnetic Resonance Imaging},
  year = {2001},
  doi = {10.1002/jmri.1112},
}
Figure