TL;DR
This paper presents a novel method for generating low-noise multi-frequency lasers (LNMFLs) using a single laser diode and a homologous heterodyne digital optical phase-locked loop (HHD-OPLL). This technique significantly reduces the relative phase noise between laser frequencies, enabling the development of a high-performance hollow-core photonic-crystal fiber optic gyro (HC-RFOG) with a demonstrated bias stability of 5.8°/h.
What Problem Does This Paper Address?
High-performance optical gyroscopes, particularly those based on resonator fiber optic gyros (RFOGs), require extremely stable and low-noise light sources. Specifically, hollow-core photonic-crystal fiber optic gyros (HC-RFOGs) offer advantages in miniaturization and environmental stability but demand multi-frequency lasers with very low relative phase noise for differential detection schemes. Traditional methods for generating such lasers, like optical sideband modulation (OSBM), often suffer from non-ideal spectral characteristics and intermodulation distortion. Other techniques, such as optical injection locking (OIL) and optical phase-locked loops (OPLLs), have limitations related to injection line, environmental factors, loop delay, laser linewidth, and complexity. This paper aims to address the need for a simpler, more robust, and effective method to generate low-noise multi-frequency lasers suitable for advanced HC-RFOG applications.
Methods
The core innovation of this paper lies in the development of a Homologous Heterodyne Digital Optical Phase-Locked Loop (HHD-OPLL). This system generates multi-frequency lasers from a single laser diode (LD) by employing an acousto-optic modulator (AOM).
Here's a breakdown of the approach:
- Single Laser Source: A single laser diode is used as the fundamental light source.
- Acousto-Optic Modulation (AOM): The laser light is split into two paths. One path remains the "eigenfrequency laser" (EFL), and the other is modulated by an AOM to create an "up-converted laser" (UCL). The frequency difference between these two lasers is determined by the driving signal of the AOM.
- Homologous Heterodyne Digital Optical Phase-Locked Loop (HHD-OPLL): This is the key novel component. It replaces the need for multiple slave lasers and complex injection locking modules found in conventional optical injection phase-locked loop (OIPLL) systems. The HHD-OPLL uses a digital signal processing approach to lock the frequency difference between the EFL and UCL to a reference signal. This involves:
- Mixing the beat signal from the EFL and UCL with a reference signal generated by a Direct Digital Synthesizer (DDS).
- Filtering and processing this mixed signal within a Field-Programmable Gate Array (FPGA).
- Employing a Proportional-Integral (PI) controller to adjust the AOM's driving signal, thereby locking the frequency difference and suppressing phase noise.
This HHD-OPLL approach simplifies the system architecture compared to OIPLLs while inheriting their advantages in phase noise suppression.
Datasets
Not discussed in the paper. The experiments rely on measurements from laboratory instruments and the performance of the developed system.
Key Insights and Ideas
- Single Laser Simplicity: Generating multiple frequencies from a single laser diode drastically simplifies the system's complexity and cost compared to using multiple independent lasers.
- HHD-OPLL Effectiveness: The HHD-OPLL proves highly effective in suppressing relative phase noise between the generated laser frequencies, achieving noise levels significantly lower than previous methods.
- Reduced Requirements: The HHD-OPLL method relaxes the stringent requirements on loop delay and laser linewidth typically associated with optical phase-locked loops, making it more practical.
- HC-RFOG Performance Boost: The low-noise multi-frequency lasers generated by this method directly translate to improved performance in HC-RFOGs, enabling higher bias stability.
- Dominance of Other Noise Sources: Once laser frequency noise is significantly suppressed, other noise sources (polarization noise, backscattering noise, Shupe noise) become dominant in the HC-RFOG's output, highlighting the effectiveness of the LNMFL generation.
Key Results
- Low-Noise Multi-Frequency Lasers (LNMFLs): The HHD-OPLL system generates multi-frequency lasers with a 20 MHz difference, achieving a beat signal noise of 0.036 Hz within a 10 Hz bandwidth. This represents a reduction of approximately 40 dB compared to systems without the HHD-OPLL.
- Tuning Range: The system demonstrates a tuning range of 120 kHz, which is about 0.6% of the carrier frequency and corresponds to a measurement range of approximately 100°/s.
- HC-RFOG Bias Stability: An HC-RFOG realized using these LNMFLs achieved a bias stability of 5.8°/h with a 10-second integration time.
- Beat Signal Linewidth: The beat signal linewidth without OPLL was 500 Hz. With the HHD-OPLL, the linewidth was narrowed to less than 1 Hz (within the SPA's resolution bandwidth limit).
Limitations and Future Work
- Environmental Sensitivity: The authors acknowledge that fluctuations in environmental parameters (temperature, stress) related to the optical path can affect the beat frequency noise, causing it to be slightly higher than theoretical simulations.
- Optimization Potential: Further optimization of impedance matching and reducing environmental sensitivity are suggested to achieve even lower frequency noise (close to 0.006 Hz) if the initial beat linewidth can be reduced below 70 Hz.
- Addressing Other Noise Sources: Future work will focus on combining the LNMFL technology with research on polarization noise, backscattering noise, and Shupe noise to implement an HC-RFOG system with navigation-level accuracy.
- Miniaturization: The authors mention plans to design signal processing circuits as exclusive and integrated components and realize lightpaths using optical microstructures and integrated optical waveguides for modularization and miniaturization.
Summary updated