Real-Time Seismic Intensity Prediction Using Self-Supervised Contrastive GNN for Earthquake Early Warning

Rafid Umayer Murshed, Kazi Noshin, Md. Anu Zakaria, Md. Forkan Uddin, A. F. M. Saiful Amin, Mohammed Eunus AliIEEE TGRS 2023 · DOI · OpenReview

TL;DR

Researchers have developed the Seismic Contrastive Graph Neural Network (SC-GNN), a deep learning model that predicts earthquake intensity with high accuracy using just five seconds of initial seismic data. By combining Graph Neural Networks (GNNs) with self-supervised contrastive learning, the system outperforms existing methods by over 200%, providing critical extra seconds for emergency response.

What Problem Does This Paper Address?

Earthquake Early Warning (EEW) systems are a race against time. Traditional "point-source" models estimate an earthquake's magnitude and location to infer how hard the ground will shake elsewhere. However, these can be slow and inaccurate for complex ruptures. Newer "ground-motion-based" systems like PLUM predict intensity directly from station observations, but they often require long windows of seismic waveforms (10 seconds or more) to make reliable predictions.

The challenge is a classic trade-off: waiting for more data increases accuracy but slashes the "lead time"—the precious seconds people have to take cover before the most destructive waves arrive. This paper tackles the "short-window" problem: how do we get high-precision intensity maps using only the very first few seconds of a seismic signal?

Methods

The authors introduce SC-GNN, which uses two clever architectural choices to bridge the gap between speed and accuracy:

  1. Spatial Intelligence (The GNN): Instead of treating seismic stations as isolated data points, the model treats them as nodes in a graph. It uses Chebyshev Convolutions (ChC) and Graph Skip Convolutions (GCSC) to propagate information across the network. This allows the model to "understand" how seismic waves travel through a specific geographic distribution of sensors.
  2. Temporal Robustness (Contrastive Learning): This is the "secret sauce." During training, the model uses a self-supervised contrastive learning strategy. It is shown both full 30-second waveforms and truncated versions (e.g., 5s). The model is trained to ensure the "embeddings" (mathematical representations) of the short signal match the long signal for the same event.

By the time the model is deployed, it has learned to extract the "essence" of an earthquake from just 5 seconds of data as effectively as if it had seen the whole thing. The contrastive "head" of the network is then discarded, leaving a lean, fast inference model.

Datasets

The model was validated on three real-world datasets:

  • Central Italy (CI) Dataset: 915 events from 39 stations; used as the primary benchmark.
  • Central Western Italy (CW) Dataset: 266 events; used to test performance on smaller datasets.
  • STEAD (Stanford Earthquake Dataset): Specifically a subset of 191 events from California to test the model's resilience in different geological settings.

The researchers used PhaseNet to precisely pick P-wave arrivals and the GMICE equation to convert raw ground acceleration into human-readable seismic intensity (EMS-98 scale).

Key Insights and Ideas

  • Learning Invariance: The core "aha moment" is using contrastive learning to make the model invariant to the time window. Usually, a model trained on 10s of data fails on 5s. By forcing the model to find similarities between different lengths of the same event, it becomes incredibly robust to data scarcity.
  • Spatial Context Matters: Standard CNNs look at waveforms in isolation. The GNN approach captures the "path effects"—how the specific distance and orientation between stations influence the incoming wave.
  • Efficiency for the Edge: The model is surprisingly small (only 2.8 MB). This makes it ideal for deployment on "edge" devices—low-power sensors in the field that need to process data locally and instantly.

Key Results

  • Massive Accuracy Gains: On the primary CI dataset, SC-GNN achieved a 234% improvement in Mean Squared Error (MSE) over the previous state-of-the-art GCN model (TISER-GCN).
  • The 5-Second Milestone: Even when restricted to a 5-second input window, SC-GNN outperformed baseline models that were given twice as much data (10 seconds). Specifically, it showed a 143% improvement over the next best model in this "ultra-fast" category.
  • High Reliability: The model maintained a correlation coefficient of ~84% between predicted and actual intensity, with the lowest standard deviation of error among all tested methods.
  • Warning Lead Time: Simulations showed that approximately 90% of stations would receive an intensity prediction before the primary P-wave even arrived at their location.

Limitations and Future Work

While the results are impressive, the authors note that the model’s generalizability is tied to its training data. A model trained on Italian geology might need transfer learning or retraining to perform optimally in Japan or Chile due to different soil conditions and fault structures.

Future work aims to incorporate meta-learning to allow the system to adapt to new regions even faster with minimal data. There is also interest in expanding the model to predict other parameters, such as peak ground velocity (PGV) or potential structural damage.

Summary updated

Abstract

Seismic intensity prediction from early or initial seismic waves received by a few seismic stations can enhance earthquake early warning systems (EEWSs), particularly in ground motion-based approaches like propagation of local undamped motion (PLUM). While many operational EEWSs currently utilize point-source-based models that estimate the warning area based on magnitude and distance measures, direct intensity prediction offers a potential improvement in accuracy and reliability. In this article, we propose a novel deep learning (DL) approach, seismic contrastive graph neural network (SC-GNN), for highly accurate seismic intensity prediction using a small portion of initial seismic waveforms from a few seismic stations. The SC-GNN consists of two key components: 1) a GNN to propagate spatiotemporal information through a graph-like structure representing seismic station distribution and wave propagation and 2) a self-supervised contrastive learning component to train the network with larger time windows and enable predictions using shorter initial waveforms. The efficacy of our approach is demonstrated through experiments on three real-world seismic datasets, where it shows superior performance over existing techniques, including a significant reduction in mean-squared error (mse) and the lowest standard deviation (SD) of error, indicating its robustness, reliability, and strong positive relationship between predicted and actual values. Notably, the SC-GNN model maintains superior performance even with 5-s input waveforms, making it especially suitable for enhancing EEW applications.
BibTeX
@article{murshed2023real,
  author = {Rafid Umayer Murshed and Kazi Noshin and Md. Anu Zakaria and Md. Forkan Uddin and A. F. M. Saiful Amin and Mohammed Eunus Ali},
  title = {{Real-Time Seismic Intensity Prediction Using Self-Supervised Contrastive GNN for Earthquake Early Warning}},
  journal = {IEEE Trans. Geosci. Remote. Sens.},
  year = {2023},
  doi = {10.48550/arxiv.2306.14336},
}
Figure