Real-time homogenous translucent material editing

Kun Xu, Yue Gao, Yong Li, Tao Ju, Shi-Min HuComputer Graphics Forum 2007 · DOI

TL;DR

This paper introduces a novel method for real-time editing of translucent materials by approximating the complex BSSRDF model with piecewise polynomial basis functions. This allows for interactive adjustment of material properties like scattering and absorption, providing instant visual feedback for designers.

What Problem Does This Paper Address?

Rendering translucent materials, which exhibit light scattering beneath the surface (subsurface scattering), is computationally expensive. Traditional BRDF models, which assume light enters and exits at the same point, are insufficient. While Jensen et al.'s analytic BSSRDF model offers a more accurate approximation, it's still too slow for interactive editing. Existing real-time rendering techniques often simplify the BSSRDF model or focus only on specific aspects like multiple scattering, leaving a gap for interactive editing of the complete BSSRDF model with dynamic parameter changes.

Methods

The core of this work lies in approximating the analytic BSSRDF model using Precomputed Radiance Transfer (PRT) techniques. Specifically, the authors:

  • Approximate BSSRDF Components with Basis Functions: They represent the multiple scattering diffuse reflectance function ($R_d$) and the single scattering exponential attenuation function ($E$) as linear combinations of basis functions. This transforms complex integral calculations into simple dot products.
  • Introduce Piecewise Polynomial Basis: Instead of standard bases like spherical harmonics or wavelets, they propose a non-uniform piecewise polynomial basis. This is argued to be more effective at approximating the strongly attenuated functions found in $R_d$ and $E$, leading to better accuracy with fewer coefficients.
  • Precompute Transport Functions: Key components, referred to as "transport functions" ($T_j$ and $S_j$), are precomputed for the scene under fixed lighting. These functions capture the scene's contribution to the outgoing radiance, independent of the material parameters.
  • Real-time Rendering Pipeline: During an editing session, the system efficiently computes the coefficients for the chosen basis functions based on user input. The final outgoing radiance at each vertex is then calculated by a dot product between these coefficients and the precomputed transport functions. Hardware acceleration (GPU) is leveraged for rendering.

Datasets

Not discussed in the paper. The authors use standard 3D models (bunny, buddha, dragon, tweety, Caesar) for demonstration and comparison.

Key Insights and Ideas

  • Piecewise Polynomials for Attenuation: The key insight is that non-uniform piecewise polynomial bases are superior to standard bases for approximating functions with strong attenuation (like $R_d$ and $E$) because they can adapt their intervals to capture rapid changes more effectively.
  • Decoupling Scene and Material: By precomputing scene-specific "transport functions," the system effectively decouples the complex scene lighting and geometry from the material properties. This allows for rapid updates when material parameters change.
  • Interactive Editing of Full BSSRDF: The method enables dynamic editing of all parameters of Jensen's analytic BSSRDF model (scattering coefficient, absorption coefficient, phase function, and index of refraction), offering a comprehensive editing experience.

Key Results

  • Real-time Performance: The system achieves real-time frame rates (e.g., 16-70 FPS depending on scene complexity) for interactive editing.
  • High-Quality Rendering: The approximations using piecewise polynomial bases provide visually comparable results to the ground truth analytic BSSRDF model, even with a relatively small number of coefficients (e.g., 32 for multiple scattering, 16 for single scattering).
  • Improved Approximation: The piecewise linear basis with 32 coefficients achieves similar accuracy to Daubechies 4 wavelets with 128 coefficients for approximating $R_d$.
  • Efficient Precomputation: Precomputation times are reasonable (e.g., 8-120 minutes depending on scene complexity), performed once per editing session.

Limitations and Future Work

  • Homogenous Materials: The current method is limited to homogenous translucent materials.
  • Fixed Lighting: The system assumes fixed environment lighting.
  • Future Work: The authors plan to extend the method to multi-layered and heterogeneous materials, incorporate dynamic lighting, and explore applications in other areas where approximating fast-decaying functions is beneficial.

Summary updated

BibTeX
@article{xu2007real,
  author = {Kun Xu and Yue Gao and Yong Li and Tao Ju and Shi-Min Hu},
  title = {{Real-time homogenous translucent material editing}},
  journal = {Computer Graphics Forum},
  year = {2007},
  doi = {10.1111/j.1467-8659.2007.01077.x},
}
Figure