RDTS-Based Two-Dimensional Temperature Monitoring with High Positioning Accuracy Using Grid Distribution

Can Zhang, ZhongXie Jin2019 · DOI

TL;DR

This paper introduces a novel 45°-inclined-cross-type (45°-ICT) fiber optic sensing pattern and accompanying algorithms to achieve highly accurate two-dimensional temperature monitoring. By cleverly distributing the sensing fiber and processing the data, they significantly improve positioning accuracy over traditional methods, opening doors for more precise structural health monitoring and leak detection.

What Problem Does This Paper Address?

Traditional Raman Distributed Temperature Sensing (RDTS) systems are excellent at measuring temperature along a single fiber optic cable. However, for applications requiring the precise location of heat sources or anomalies in a 2D space (like monitoring pipelines, tanks, or structural components), RDTS has limitations. Existing 2D methods often struggle with crosstalk, have accuracy dependent on fiber laying direction, or require expensive hardware modifications. The core challenge is to achieve high spatial resolution and accurate 2D positioning without compromising sensing distance or incurring significant costs.

Methods

The paper proposes a new 45°-inclined-cross-type (45°-ICT) routing pattern for the sensing fiber. Instead of simple horizontal or vertical runs, the fiber is laid out in a grid of diagonal segments. This pattern, combined with a matrix-based representation method and a specific algorithm, allows for the determination of temperature at the intersection points of the fiber grid.

Key algorithmic aspects include:

  • Matrix Representation: The 2D space is divided into uniform lattices, with fiber intersections representing points of interest. A matrix stores the temperature values at these intersections, where rows and columns correspond to spatial coordinates.
  • Linear Interpolation: Due to the system's spatial resolution (0.8 m) being coarser than the desired lattice size, linear interpolation is used to estimate temperature values for each fiber segment.
  • Numerical Optimization: To handle potential ambiguities arising from the limited spatial resolution, a method is employed to assign the lower of two temperature values at an intersection, effectively identifying abnormal temperature points.
  • Dense Distribution: To further enhance accuracy, the authors experimented with a "double-dense" distribution, reducing the lattice size and thus improving the potential for precise localization.

Datasets

Not discussed in the paper. The experiments used simulated heat sources (incandescent lamps, radiant heaters, hot water bags) to create controlled temperature anomalies within a laboratory setup.

Key Insights and Ideas

  • The 45°-ICT pattern is key: This diagonal routing cleverly avoids crosstalk and ensures positioning accuracy is consistent in both horizontal and vertical directions, unlike simpler S-type patterns.
  • Algorithm over hardware: The proposed method achieves improved accuracy primarily through clever routing and algorithmic processing, minimizing the need for costly hardware upgrades.
  • Trade-off between density and length: Denser fiber arrangements lead to higher positioning accuracy but can reduce the overall sensing length achievable with a given amount of fiber.
  • Interpolation's subtle impact: While necessary, interpolation can slightly reduce the peak temperature readings, a factor to consider when setting temperature thresholds.
  • Distinguishing heat sources: The matrix representation and prioritization of intersection points help differentiate multiple heat sources, even when they are close together.

Key Results

  • A positioning accuracy of approximately 0.1 m was achieved with a standard RDTS system having a spatial resolution of 0.8 m.
  • This accuracy was obtained without any hardware modification to the RDTS system.
  • The 45°-ICT distribution demonstrated no crosstalk during several months of experiments.
  • The experimental results were consistent with theoretical calculations of positioning accuracy.

Limitations and Future Work

  • Heat source size: The accuracy of temperature measurement can be affected if the heat source is smaller than the system's original spatial resolution (0.8 m).
  • Temperature accuracy vs. resolution: While positioning accuracy is enhanced, the absolute temperature measurement accuracy is primarily determined by the DTS system itself and may be slightly reduced by interpolation.
  • Drawing tool accuracy: The accuracy of the experimental setup was limited by the precision of the drawing tool used to lay out the fiber and represent its geometric length.

The authors suggest that the positioning accuracy could be further improved by increasing the density of the sensing fiber distribution. They also propose that this technology is well-suited for applications like pipeline leak monitoring, leak-before-break detection, and structural health monitoring. The method can also be extended to three-dimensional positioning with a more intricate fiber routing design.

Summary updated

BibTeX
@misc{zhang2019rdts,
  author = {Can Zhang and ZhongXie Jin},
  title = {{RDTS-Based Two-Dimensional Temperature Monitoring with High Positioning Accuracy Using Grid Distribution}},
  year = {2019},
  doi = {10.3390/s19224993},
}

Loading related content...

Figure