Rational Metabolic Engineering Combined with Biosensor-Mediated Adaptive Laboratory Evolution for l-Cysteine Overproduction from Glycerol in Escherichia coli

Xiaomei Zhang, Zhenhang Sun, Jinyu Bian, Yujie Gao, Dong Zhang, Guoqiang Xu, Xiaojuan Zhang, Hui Li, Jin‐Song Shi, Zhenghong XuFermentation 2022 · DOI

TL;DR

This paper presents a novel strategy for producing L-cysteine from glycerol in E. coli by combining rational metabolic engineering with a biosensor-guided adaptive laboratory evolution (ALE) approach. The developed strain achieved a significant L-cysteine titer of 313.4 mg/L, paving the way for more sustainable and cost-effective production of this valuable amino acid.

What Problem Does This Paper Address?

L-cysteine is a crucial amino acid with widespread applications in pharmaceuticals and cosmetics. While microbial production is desirable, achieving high yields has been challenging due to L-cysteine's toxicity and complex biosynthesis regulation. Previous efforts primarily focused on glucose as a carbon source. This study tackles the challenge of producing L-cysteine from glycerol, a readily available and sustainable byproduct of biodiesel production. The key hurdles addressed are: 1) enhancing the precursor L-serine supply, 2) improving the strain's tolerance to L-serine and L-cysteine, and 3) developing an efficient screening method for high-producing mutants.

Methods

The researchers employed a multi-pronged approach:

  • Rational Metabolic Engineering: They began by genetically modifying E. coli strain 4W. First, they deleted genes involved in L-serine degradation (specifically glyA, encoding serine hydroxymethyl transferase) to boost L-serine accumulation, creating strain 4WG.
  • Biosensor Construction and Validation: A novel serine-biosensor was engineered in E. coli. This biosensor, based on a transcriptional regulator from C. glutamicum, translates intracellular L-serine levels into a measurable fluorescence signal. Its validity and sensitivity were confirmed in E. coli.
  • Biosensor-Mediated Adaptive Laboratory Evolution (ALE): Strain 4WG was subjected to ALE, where it was repeatedly cultured under increasing L-serine concentrations. The biosensor was crucial here, allowing for high-throughput screening of evolved populations to identify strains with improved L-serine tolerance and production, leading to strain 4WGX.
  • Genome Sequencing and Analysis: The genome of the evolved strain 4WGX was sequenced to identify genetic mutations responsible for the improved phenotype.
  • Further Metabolic Engineering: Strain 4WGX was further engineered by deleting the L-cysteine degradation gene (tnaA) and overexpressing genes involved in L-cysteine synthesis (cysE) and transport (ydeD).

Datasets

Not discussed in the paper. The study focuses on strain development and experimental fermentation data rather than large-scale datasets for training or evaluation.

Key Insights and Ideas

  • Glycerol as a Viable Carbon Source: This work demonstrates the feasibility of using glycerol, a biodiesel byproduct, for L-cysteine production, offering a more sustainable alternative to glucose.
  • The Power of Biosensor-Driven Evolution: Integrating a biosensor with ALE significantly accelerates the discovery of high-performing strains by enabling efficient screening for non-selectable phenotypes like L-serine tolerance.
  • L-Serine Toxicity is a Major Bottleneck: The study highlights that L-serine itself can be toxic to E. coli, and improving tolerance to this precursor is as critical as increasing its production for L-cysteine overproduction.
  • Membrane Proteins Play a Key Role in Tolerance: Genome sequencing revealed mutations in genes encoding membrane proteins in the evolved strain 4WGX, suggesting that alterations in membrane function are crucial for coping with high L-serine concentrations.

Key Results

  • Improved L-Serine Production: Deleting glyA in strain 4W led to strain 4WG, increasing L-serine titer from 1.1 g/L to 2.01 g/L.
  • Enhanced L-Serine Tolerance and Production via ALE: The biosensor-guided ALE process yielded strain 4WGX, which produced 4.13 g/L of L-serine, a significant improvement over its parent strain.
  • Successful L-Cysteine Production from Glycerol: The final engineered strain, 4WGX-∆tnaA-cysE-ydeD, achieved an L-cysteine titer of 313.4 mg/L using glycerol as the carbon source. This is the first report of L-cysteine production from glycerol.
  • Identification of Key Mutations: Genome sequencing identified eleven single base mutations in 4WGX compared to 4W, with ten being non-synonymous, many of which were in genes encoding membrane proteins.

Limitations and Future Work

  • L-Cysteine Toxicity: The study notes that the final L-cysteine producing strain showed lower cell growth and glycerol consumption, suggesting that L-cysteine itself might be toxic. Future work should focus on improving the strain's tolerance to L-cysteine.
  • Further Optimization: While glycerol is a promising substrate, the L-cysteine titer achieved is lower than that reported for glucose-based production. Further metabolic engineering and optimization are needed to make glycerol-based production fully competitive.
  • Understanding Mutation Effects: The exact roles of the identified mutations, particularly those in membrane proteins, require further investigation to fully elucidate their contribution to L-serine tolerance and production.
  • Sulfur Source Uptake: The authors suggest focusing on genes involved in the uptake of sulfur sources for future L-cysteine production improvements.

Summary updated

Abstract

l-Cysteine is an important sulfur-containing amino acid with numerous applications in the pharmaceutical and cosmetic industries. The microbial production of l-cysteine has received substantial attention, and the supply of the precursor l-serine is important in l-cysteine biosynthesis. In this study, to achieve l-cysteine overproduction, we first increased l-serine production by deleting genes involved in the pathway of l-serine degradation to glycine (serine hydroxymethyl transferase, SHMT, encoded by glyA genes) in strain 4W (with l-serine titer of 1.1 g/L), thus resulting in strain 4WG with l-serine titer of 2.01 g/L. Second, the serine-biosensor based on the transcriptional regulator NCgl0581 of C. glutamicum was constructed in E. coli, and the validity and sensitivity of the biosensor were demonstrated in E. coli. Then 4WG was further evolved through adaptive laboratory evolution (ALE) combined with serine-biosensor, thus yielding the strain 4WGX with 4.13 g/L l-serine production. Moreover, the whole genome of the evolved strain 4WGX was sequenced, and ten non-synonymous mutations were found in the genome of strain 4WGX compared with strain 4W. Finally, 4WGX was used as the starting strain, and deletion of the l-cysteine desulfhydrases (encoded by tnaA), overexpression of serine acetyltransferase (encoded by cysE) and the key enzyme of transport pathway (encoded by ydeD) were performed in strain 4WGX. The recombinant strain 4WGX-∆tnaA-cysE-ydeD can produce 313.4 mg/L of l-cysteine using glycerol as the carbon source. This work provides an efficient method for the biosynthesis of value-added commodity products associated with glycerol conversion.
BibTeX
@inproceedings{zhang2022rational,
  author = {Xiaomei Zhang and Zhenhang Sun and Jinyu Bian and Yujie Gao and Dong Zhang and Guoqiang Xu and Xiaojuan Zhang and Hui Li and Jin‐Song Shi and Zhenghong Xu},
  title = {{Rational Metabolic Engineering Combined with Biosensor-Mediated Adaptive Laboratory Evolution for l-Cysteine Overproduction from Glycerol in Escherichia coli}},
  booktitle = {Fermentation},
  year = {2022},
  doi = {10.3390/fermentation8070299},
}
Figure