Rapid melt grown Germanium p-i-n photodiode wrapped around a Silicon waveguide

Ryan Going, Tae Joon Seok, Ming C. Wu2014 · DOI

TL;DR

Researchers have developed a novel Germanium p-i-n photodiode that wraps around a silicon waveguide, enabling efficient optical coupling and a compact design. This approach leverages rapid melt growth to create high-quality Germanium, achieving a responsivity of 0.8 A/W at 1550 nm with a remarkably low capacitance of 626 aF.

What Problem Does This Paper Address?

The demand for low-capacitance, high-responsivity photodiodes is rapidly growing, particularly for optical interconnects in computing. While germanium-on-silicon photodiodes are a promising avenue, traditional epitaxial growth methods often result in defects in the initial germanium layers, limiting device size and performance. This paper addresses the challenge of creating high-quality germanium photodiodes that can be efficiently integrated with silicon photonics platforms, overcoming the limitations of conventional growth techniques.

Methods

The core innovation lies in the fabrication process. A 150 nm thick germanium layer is deposited conformally around a single-mode silicon waveguide. Crucially, this germanium is then subjected to a "rapid melt growth" technique. This involves melting the germanium at 1000°C for a brief period and then cooling it to crystallize, resulting in a defect-free, single-crystal germanium layer. This technique allows for the germanium to wrap around the waveguide, enhancing optical coupling. Electrical isolation between the waveguide and germanium is achieved using a thin layer of thermally grown SiO2. The device is completed with ion implantation for p- and n-junctions, followed by metal contact deposition. Finite Difference Time Domain (FDTD) simulations were used to model optical coupling.

Datasets

Not discussed in the paper.

Key Insights and Ideas

  • Wrapping for Efficiency: The ingenious design of wrapping the germanium photodiode around the silicon waveguide is key to achieving excellent optical coupling and a compact footprint. This maximizes the interaction between the optical mode and the active photodetector material.
  • Rapid Melt Growth for Quality: Utilizing rapid melt growth to obtain defect-free germanium on silicon oxide is a critical enabler. This technique circumvents the issues associated with initial layer defects in direct epitaxy, leading to higher quality material.
  • Minimizing Doping Region Interaction: The FDTD simulations highlight that the optical mode primarily resides in the intrinsic (i-Ge) region of the photodiode. This is advantageous as it minimizes optical losses that would occur if the mode interacted with the heavily doped p+ and n+ regions or the metal contacts.

Key Results

  • A 32 µm long, p-i-n germanium photodiode was fabricated.
  • The device achieved a responsivity of 0.8 A/W at 1550 nm.
  • The measured dark current at -1 V bias was 52 µA.
  • The calculated junction capacitance is 626 aF, demonstrating a highly compact device.
  • An impulse response measurement showed a pulse width of 70 ps FWHM when biased at -2.5 V and illuminated with a 500 fs pulsed laser.

Limitations and Future Work

The authors acknowledge that the measured responsivity (0.8 A/W) was lower than theoretically predicted (1.15 A/W). They attribute this to scattering from the rough germanium surface, a consequence of the LPCVD deposition process. They note that this roughness has since been corrected in subsequent fabrication runs, and devices with smoother germanium films are yet to be completed. The high dark current is believed to be due to incomplete phosphorus activation, which is under investigation. The impulse response (70 ps) was longer than the drift-limited calculation (20 ps), which could be due to incomplete phosphorus activation or saturation effects from the high laser pulse power used in the measurement. Future work will likely focus on optimizing the fabrication process to further improve responsivity and reduce dark current, as well as exploring the performance of devices with the corrected germanium surface.

Summary updated

Abstract

Get PDF Email Share Share with Facebook Tweet This Post on reddit Share with LinkedIn Add to CiteULike Add to Mendeley Add to BibSonomy Get Citation Copy Citation Text R. Going, T. J. Seok, and M. C. Wu, "Rapid melt grown Germanium p-i-n photodiode wrapped around a Silicon waveguide," in CLEO: 2014, OSA Technical Digest (online) (Optica Publishing Group, 2014), paper STu3G.2. Export Citation BibTex Endnote (RIS) HTML Plain Text Citation alert Save article
BibTeX
@misc{going2014rapid,
  author = {Ryan Going and Tae Joon Seok and Ming C. Wu},
  title = {{Rapid melt grown Germanium p-i-n photodiode wrapped around a Silicon waveguide}},
  year = {2014},
  doi = {10.1364/cleo\_si.2014.stu3g.2},
}

Loading related content...

Figure