Rapid Detection of Aspergillus fumigatus Using Multiple Cross Displacement Amplification Combined With Nanoparticles-Based Lateral Flow

Luxi Jiang, Xiaomeng Li, Rumeng Gu, Deguang MuFrontiers in Cellular and Infection Microbiology 2021 · DOI

Abstract

Aspergillus fumigatus is an opportunistic, ubiquitous, saprophytic mold which can cause infection in the lungs, nose, eyes, brain, and bones in humans, especially in immunocompromised patients. However, it is difficult to diagnose A. fumigatus infection quickly. Here, we introduce a new detection method, namely multiple cross displacement amplification (MCDA) combined with nanoparticle-based lateral flow biosensor (LFB) (MCDA-LFB), which was proved to be fast, reliable, and simple for detecting A. fumigatus. We designed a set of 10 primers targeting the gene annexin ANXC4 of A. fumigatus. The best MCDA condition is 66 °C for 35 min. The minimum concentration that can be detected by this method was 10 fg. In the case of 100 sputum samples, 20 (20%) and 15 (15%) samples were positive by MCDA-LFB and PCR method, respectively. MCDA-LFB and traditional culture method showed the same results. Compared with the culture method, the diagnostic accuracy of MCDA-LFB can reach 100%. It showed that the MCDA-LFB method has better detection ability than the PCR method. We found that the whole process could be controlled within 60 min including the preparation of DNA (20 min), MCDA reaction (35 min) and results reporting (2 min). These results show that this assay is suitable for the rapid, sensitive and specific detection of A. fumigatus in clinical samples.

Introduction

Aspergillus fumigatus is a ubiquitous mold that poses a lethal threat to immunocompromised patients, causing invasive pulmonary aspergillosis with mortality rates as high as 50–60%. Despite the stakes, current diagnostic methods are a bottleneck. Fungal cultures—the "gold standard"—can take up to 10 days and often yield false negatives. Microscopic exams lack sensitivity, and while PCR is faster, it requires expensive thermal cyclers and specialized laboratory infrastructure that isn't always available in resource-limited settings.

The authors sought to bridge this gap by creating a diagnostic that is fast, highly sensitive, and requires only a simple constant-heat source rather than complex machinery.

Methods

The researchers utilized a technique called Multiple Cross Displacement Amplification (MCDA). Unlike PCR, which requires cycling through different temperatures, MCDA is isothermal, meaning it runs at a single, constant temperature (in this case, 66°C).

Primer Design and Target Selection

The team designed a sophisticated set of 10 primers targeting the annexin ANXC4 gene, a specific marker for A. fumigatus. This high number of primers ensures extreme specificity and rapid amplification.

The sequences, positions and modifications of the Aspergillus fumigatus-specific gene annex ANXC4.

Lateral Flow Biosensor (LFB)

To make the results visible to the naked eye, they used a nanoparticle-based "dipstick." The amplified DNA is labeled with biotin and FITC. When the sample flows across the strip, streptavidin-coated nanoparticles bind to the DNA, creating a visible red line if the pathogen is present—similar to a rapid COVID-19 or pregnancy test.

Optimized Workflow

The entire process—from raw DNA extraction (20 min) to amplification (35 min) and visual reporting (2 min)—is completed in under an hour.

Results

The study validated the assay using reference strains and clinical samples.

Sensitivity and Specificity

The assay reached a Limit of Detection (LoD) of 10 fg (femtograms) of genomic DNA. For context, this is significantly more sensitive than many standard PCR protocols, which often struggle with low-copy-number samples. Choosing the annexin ANXC4 gene proved highly effective; the assay showed zero cross-reactivity with 45 "off-target" strains, including other Aspergillus species, Candida species, and common bacteria.

Clinical Performance

In a trial of 100 sputum samples from patients suspected of fungal infections:

  • MCDA-LFB identified 20 positive cases, matching the results of the 10-day culture method perfectly (100% accuracy).
  • Traditional PCR only identified 15 of the 20 positive cases. The five missed cases likely had DNA concentrations below the PCR detection threshold but above the 10 fg threshold of the MCDA-LFB.
  • Speed: The total turnaround time was roughly 57 minutes, compared to several hours for PCR or several days for culture.

Discussion

The MCDA-LFB assay offers a significant "isothermal advantage." By eliminating the need for a thermal cycler, it is much more "field-ready" than PCR. Any stable heat source, like a simple water bath, is sufficient.

However, there are limitations. Colorimetric indicators on the LFB can sometimes be subjective if the line is very faint. Additionally, while the amplification is rapid, the 20-minute DNA extraction step still requires a commercial kit. Future iterations might look into "crude" sample processing to further simplify the workflow for point-of-care use. Finally, while the 100-sample trial is promising, larger multi-center trials are needed to confirm these performance metrics across broader populations.

Conclusion

The MCDA-LFB method represents a fast, reliable, and simple tool for detecting A. fumigatus. Its high sensitivity and 100% diagnostic accuracy relative to culture methods make it a powerful candidate for rapid clinical diagnosis, especially in resource-limited settings.

Summary updated

Abstract

<i>Aspergillus fumigatus</i> is an opportunistic, ubiquitous, saprophytic mold which can cause infection in the lungs, nose, eyes, brain, and bones in humans, especially in immunocompromised patients. However, it is difficult to diagnose <i>A. fumigatus</i> infection quickly. Here, we introduce a new detection method, namely multiple cross displacement amplification (MCDA) combined with nanoparticle-based lateral flow biosensor (LFB) (MCDA-LFB), which was proved to be fast, reliable, and simple for detecting <i>A. fumigatus</i>. We designed a set of 10 primers targeting the gene annexin ANXC4 of <i>A. fumigatus</i>. The best MCDA condition is 66 °C for 35 min. The minimum concentration that can be detected by this method was 10 fg. In the case of 100 sputum samples, 20 (20%) and 15 (15%) samples were positive by MCDA-LFB and PCR method, respectively. MCDA-LFB and traditional culture method showed the same results. Compared with the culture method, the diagnostic accuracy of MCDA-LFB can reach 100%. It showed that the MCDA-LFB method has better detection ability than the PCR method. We found that the whole process could be controlled within 60 min including the preparation of DNA (20 min), MCDA reaction (35 min) and results reporting (2 min). These results show that this assay is suitable for the rapid, sensitive and specific detection of <i>A. fumigatus</i> in clinical samples.
BibTeX
@inproceedings{jiang2021rapid,
  author = {Luxi Jiang and Xiaomeng Li and Rumeng Gu and Deguang Mu},
  title = {{Rapid Detection of Aspergillus fumigatus Using Multiple Cross Displacement Amplification Combined With Nanoparticles-Based Lateral Flow}},
  booktitle = {Frontiers in Cellular and Infection Microbiology},
  year = {2021},
  doi = {10.3389/fcimb.2021.622402},
}
Figure