R-Phase Transformation Evolution in NiTi SMA Wires Studied via the Internal Friction Technique

Yuhao Xu, Junlan Chen, Xinggang Wang, Meng Sun, Xianping Wang, Weibin JiangCrystals 2024 · DOI

TL;DR

This study investigates the R-phase transformation in NiTi shape memory alloy wires using internal friction (IF) and electron microscopy. They found that mid-temperature aging can induce distinct R-phase variants (R1 and R2) without the typical Ni4Ti3 precipitates, leading to enhanced damping capacity. This work sheds light on alternative pathways for R-phase formation and its impact on material properties.

What Problem Does This Paper Address?

Nickel-Titanium (NiTi) shape memory alloys (SMAs) are crucial for applications like medical implants and damping systems due to their unique pseudoelastic and shape memory effects. The R-phase is a critical intermediate phase in the transformation pathway from the parent B2 phase to the martensitic B19' phase. Traditionally, the formation of the R-phase, especially for enhanced damping, has been linked to the presence of Ni4Ti3 nanoprecipitates formed during low- or intermediate-temperature aging. However, there's a question about whether the R-phase can form and influence material properties through other mechanisms, particularly in cold-worked NiTi wires subjected to mid-temperature aging, and how this transformation impacts damping characteristics. This paper aims to explore this by investigating the R-phase evolution and its correlation with damping in cold-drawn NiTi wires treated at mid-temperatures (400-500 °C).

Methods

The researchers employed a multi-technique approach to thoroughly characterize the NiTi wires:

  • Heat Treatment: Commercial 80% area reduction cold-drawn NiTi wires were subjected to various heat treatments at 400 °C, 450 °C, and 500 °C for durations of 10, 20, 40, and 60 minutes, followed by water quenching.
  • Tensile Testing: An Instron 9657 machine was used to measure tensile properties and hysteresis loops to assess pseudoelastic behavior and energy dissipation.
  • X-ray Diffraction (XRD): A Bruker D8 Advance diffractometer was used to determine the phase composition and analyze lattice distortions.
  • Transmission Electron Microscopy (TEM): FEI Tecnai G2 F20 TEM was utilized for high-resolution imaging and selected area electron diffraction (SAED) to study microstructural features and phase identification.
  • Internal Friction (IF) Technique: An automatic inverted torsion pendulum apparatus was used to measure the internal friction (Q⁻¹) as a function of temperature during cooling. This technique is highly sensitive to phase transformations.

Datasets

Not discussed in the paper. The study relies on experimental data generated from the treated NiTi samples.

Key Insights and Ideas

  • R-Phase Without Ni4Ti3 Precipitates: A significant finding is the observation of R-phase formation and its variants (R1 and R2) in cold-drawn NiTi wires aged at mid-temperatures (400-450 °C) without the presence of the commonly cited Ni4Ti3 nanoprecipitates. This suggests alternative nucleation pathways for the R-phase.
  • Stress-Induced R-Phase Variants: The splitting of the internal friction peak, particularly at 450 °C with longer aging times, indicates the dynamic transformation into distinct R-phase variants (R1 and R2). This splitting is attributed to non-uniformly distributed stress fields and short-range segregation of Ni atoms within the B2 matrix.
  • Enhanced Damping Capacity: The presence of these distinct R-phase variants is directly linked to an increased specific damping capacity (SDC). The sample exhibiting significant dynamic phase transition splitting reached an SDC of 0.60, highlighting the potential for tailoring damping properties through controlled aging.
  • Microstructural Role of Dislocations: High-resolution TEM (HRTEM) revealed a high density of edge dislocations in the R-phase structure, particularly in the 400 °C treated samples. This suggests that dislocations play a crucial role in nucleating and stabilizing the R-phase, especially in the absence of precipitates.
  • Aging Time and Temperature Sensitivity: The study demonstrates that both aging temperature and time significantly influence the R-phase evolution. Higher temperatures (450 °C) and longer aging times promote the splitting of the R-phase transformation peaks, leading to more complex R-phase structures.

Key Results

  • Tensile Properties: Heat-treated samples exhibited distinct pseudoelastic stress plateaus, unlike the as-received cold-worked samples. The ultimate tensile strength generally decreased with heat treatment, but total elongation significantly increased.
  • XRD: XRD patterns primarily showed the B2 austenite phase for heat-treated samples. The narrowing of diffraction peaks with aging indicated a release of strain and grain lattice recovery.
  • TEM: TEM images revealed fine nanometric grains. SAED patterns confirmed the B2 phase, but direct evidence of R-phase or Ni4Ti3 precipitates was not always clear, necessitating further analysis. HRTEM and FFT analysis confirmed the presence of R-phase variants (R1 and R2) and a high density of edge dislocations in the R-phase structure.
  • Internal Friction: Temperature-dependent IF curves showed two distinct peaks (P1 and P2) during cooling. P1 was attributed to the B2 → R phase transformation, and its splitting into P1 and P1' was observed with increasing aging time at 450 °C, indicating the formation of two R-phase variants. The P1 peak temperature shifted to lower temperatures with prolonged aging.
  • Specific Damping Capacity (SDC): SDC generally increased with prolonged annealing time. A notable jump in SDC was observed for samples treated at 450 °C for 20 and 40 minutes, correlating with the emergence of distinct R-phase variants.

Limitations and Future Work

  • TEM Resolution: While HRTEM provided detailed insights, the SAED analysis in some cases was limited by the relatively large probing area, making it challenging to definitively identify all phases, especially at the nanoscale.
  • R-Phase Variants Identification: The precise crystallographic relationship and distinction between the R1 and R2 variants could benefit from more advanced diffraction analysis.
  • Mechanism of Ni Segregation: The paper suggests Ni segregation leading to microregions with varying Ni contents. Further investigation using atom probe tomography or advanced elemental mapping techniques could provide direct evidence and quantify this segregation.
  • Future Work: The authors suggest that further experimental characterization of phase composition is warranted. Investigating the influence of different aging parameters and exploring the precise mechanism of Ni segregation and its role in R-phase variant formation would be valuable. Understanding the impact of these R-phase variants on other functional properties beyond damping is also a promising avenue.

Summary updated

Abstract

The specific damping capacity variation of heat-treated NiTi was observed during a pseudoelasticity test. The detailed B2 → R-phase transformation process in cold-drawn NiTi wires undergoing middle-temperature aging was studied via X-ray diffraction, transmission electron microscope, and internal friction technique. Results show that, as aging time increased at 450 °C, the dynamic phase transition splitting from B2 → R to B2 → R1 and B2 → R2 became evident. However, such a splitting process was not observed for the sample after aging at 400 °C. The reason for R-phase generation is attributed to non-uniformly distributed stress fields. The splitting of the internal friction peak, in conjunction with high-resolution transmission electron microscope and mechanic results, suggests a substantial occurrence of short-range segregation of Ni atoms in the B2-NiTi matrix. Furthermore, the specific damping capacity (SDC) exhibits a gradual increase with prolonged annealing time. Specifically, the sample with significant dynamic phase transition splitting reaches an SDC value of 0.60.
BibTeX
@inproceedings{xu2024r,
  author = {Yuhao Xu and Junlan Chen and Xinggang Wang and Meng Sun and Xianping Wang and Weibin Jiang},
  title = {{R-Phase Transformation Evolution in NiTi SMA Wires Studied via the Internal Friction Technique}},
  booktitle = {Crystals},
  year = {2024},
  doi = {10.3390/cryst14050476},
}

Loading related content...

Figure