Quantum random number generation based on a perovskite light emitting diode

Joakim Argillander, Alvaro Alarcón, Chunxiong Bao, Chaoyang Kuang, G.m.a. Lima, Feng Gao, Guilherme B. XavierarXiv 2022 · DOI · arXiv

TL;DR

Researchers have demonstrated the first high-speed quantum random number generator (QRNG) powered by a perovskite light-emitting diode (PeLED). By leveraging the unique optical properties and low-cost fabrication of perovskites, the team achieved a secure generation rate of over 10 Mbit/s—comparable to commercial devices—while offering a more sustainable, lower-carbon alternative to traditional semiconductor light sources.

What Problem Does This Paper Address?

High-quality randomness is the backbone of modern encryption, secure communication, and complex simulations. While classical "pseudo" random number generators follow deterministic algorithms, Quantum Random Number Generators (QRNGs) exploit the inherent unpredictability of quantum mechanics to provide truly unbiased numbers.

However, current QRNGs face two major hurdles:

  1. Hardware Trust: Most generators are "device-dependent," meaning you must trust that the manufacturer hasn't built in a backdoor or that the hardware isn't leaking information to an eavesdropper.
  2. Scalability and Sustainability: Standard quantum light sources (like traditional III-V semiconductor lasers) require expensive, energy-intensive manufacturing processes like epitaxial growth. As quantum technologies move toward mass production, the environmental footprint and cost of these components become significant barriers.

Methods

The authors developed a QRNG based on a metal-halide PeLED acting as a source of weak coherent states.

  • The Hardware: The PeLED was fabricated using solution-processing (spin-coating), which is significantly cheaper and less energy-intensive than traditional methods. The device emits light at 804 nm.
  • The Protocol: They employed a Measurement-Device-Independent (MDI) scenario. In this setup, the user prepares specific quantum states (horizontal, vertical, or a superposition) and sends them to an "untrusted" measurement device. Because the security is derived from the states prepared rather than the measurement hardware itself, the system is inherently protected against side-channel attacks on the detectors.
  • Randomness Extraction: To ensure the final output was perfectly uniform, the raw bits were processed using a Toeplitz hashing extractor, which distills high-entropy bits from the raw quantum measurements.
  • Verification: The final bitstream was validated using the industry-standard NIST 800-22 statistical test suite.

Datasets

As an experimental physics paper, it does not use external training datasets. Instead, the authors generated and evaluated their own data:

  • Evaluation Data: A sequence of 5 Gbits of generated random numbers was used for the NIST statistical validation.
  • Comparative Benchmark: The authors compiled a meta-dataset of previously published QRNGs (ranging from 2004 to 2022) to compare their PeLED's bitrate and security class against the state-of-the-art (see Figure 1 in the paper).

Key Insights and Ideas

  • PeLEDs are Quantum-Ready: This is the first proof-of-concept showing that perovskites—previously famous for solar cells and displays—are high-quality enough for demanding quantum information tasks.
  • Security Without Trust: By using the MDI protocol, the researchers proved they could certify at least 0.71 bits of private randomness per round, even if an eavesdropper had complete control over the measurement detectors.
  • The Sustainability Argument: The authors emphasize the "Life Cycle Assessment" (LCA). PeLEDs have a much lower "energy payback time" and greenhouse gas emission factor compared to silicon or traditional semiconductor benchmarks, making them the "green" choice for future quantum infrastructure.
  • Decoupling Brightness from Security: A fascinating finding was that even as the PeLED's brightness naturally decayed over 22 days, the success probability of the quantum states remained stable. This means the security certification remains valid even as the hardware ages.

Key Results

  • High Speed: The system achieved a maximum sustained raw bit rate of 10.35 Mbit/s, with an average of 9.01 Mbit/s over the entire run.
  • Statistical Perfection: The generated bits passed all 16 tests in the NIST 800-22 suite, meaning the output is indistinguishable from true noise.
  • Operational Stability: The PeLED remained functional for over three weeks of continuous operation, maintaining more than half of its original brightness after 22 days.
  • Efficiency: The MDI protocol allowed for a high min-entropy ($H_{min} = 0.71 \pm 0.01$), indicating a very high "purity" of randomness.

Limitations and Future Work

  • Long-term Stability: While 22 days is impressive for a research-grade PeLED, commercial applications require years of stability. The authors noted a "slow decay" in performance after the first 8 days due to material degradation.
  • Integration: The current setup uses discrete optical components (lenses, filters, and external detectors). The next logical step is on-chip integration—combining the PeLED, waveplates, and detectors into a single, compact CMOS-compatible package.
  • Scaling: Future work will likely focus on optimizing the PeLED's emission for even higher bitrates to compete with the fastest (though less secure) device-dependent generators.

Summary updated

Abstract

The recent development of perovskite light emitting diodes (PeLEDs) has the potential to revolutionize the fields of optical communication and lighting devices, due to their simplicity of fabrication and outstanding optical properties. Here we demonstrate, for the first time, that PeLEDs can also be used in the field of quantum technologies by demonstrating a highly-secure quantum random number generator (QRNG). Modern QRNGs that certify their privacy are posed to replace widely adopted pseudo and true classical random number generators in applications such as encryption and gambling, and therefore, need to be cheap, fast and with integration capabilities. Using a compact metal-halide PeLED source, we generate random numbers, which are certified to be secure against an eavesdropper, following the quantum measurement-device-independent scenario. The obtained random number generation rate of more than 10 Mbit s$^{-1}$, which is already comparable to actual commercial devices, shows that PeLEDs can work as high-quality light sources for quantum information tasks, thus paving the way for future developments of quantum technologies. Lastly, we argue that the simpler PeLED manufacturing process, when comparing to solid-state devices, may have large environmental impacts when quantum technology systems become more mass produced, due to the possible lower carbon footprint.
BibTeX
@misc{argillander2022quantum,
  author = {Joakim Argillander and Alvaro Alarcón and Chunxiong Bao and Chaoyang Kuang and G.M.A. Lima and Feng Gao and Guilherme B. Xavier},
  title = {{Quantum random number generation based on a perovskite light emitting diode}},
  year = {2022},
  eprint = {2212.09773},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2212.09773},
}

Loading related content...

Figure