TL;DR
This paper introduces a novel method for quantitatively identifying and alarming blade crack faults (BCFs) in centrifugal booster fans using sensor-dependent vibration data. By combining advanced signal processing techniques with a new compound index, the approach offers a more robust and reliable way to detect incipient cracks and schedule maintenance, preventing costly breakdowns and accidents.
What Problem Does This Paper Address?
Centrifugal booster fans are critical for efficiently utilizing blast furnace gas (BFG) in iron and steel production, enabling electricity generation. However, these fans are prone to blade crack faults (BCFs), which can lead to unscheduled downtime, severe equipment damage, and potentially dangerous accidents. While vibration analysis is a common technique for fault diagnosis, existing methods often struggle with accurately quantifying the severity of BCFs and providing timely, actionable alarms. This paper aims to bridge this gap by developing a quantitative identification and abnormality alarm strategy that can reliably detect and assess the degree of blade cracks, facilitating condition-based maintenance.
Methods
The authors propose a multi-stage approach:
- Data Acquisition: Vibration data is collected from multiple sensors strategically placed on the fan bearings and motor.
- Signal Pre-processing:
- Discrete Spectrum Interpolation: This method is used to accurately estimate the amplitude and phase of the rotating frequency and its harmonics, overcoming the energy leakage issues associated with traditional FFT analysis.
- Short-Time Fourier Transform (STFT): STFT is employed to analyze the non-stationary characteristics of the vibration signals, effectively capturing time-varying frequency components that indicate crack presence.
- Quantitative Identification and Alarm Strategy: A novel compound index is developed, combining two key indicators:
- Largest Lyapunov Exponent (LLE): This measures the exponential rate of divergence of nearby trajectories in the system's state space. A positive LLE suggests chaotic behavior, indicating a deviation from normal operating conditions, potentially due to mechanical faults like cracks.
- Relative Energy Ratio at the Second Harmonic Frequency Component (K₂f): This index quantifies the energy contribution of the second harmonic frequency component relative to the total energy of the first six harmonics. As cracks open and close during rotation, they introduce a twice-per-revolution stiffness variation, leading to an increased amplitude in the second harmonic. K₂f captures this change, providing a measure of crack severity.
- Abnormality Alarm: Thresholds are defined for both LLE and K₂f to categorize the fan's condition into normal, incipient fault, and serious fault states, triggering appropriate maintenance actions.
Datasets
The study utilizes historical sensor-dependent vibration data collected from the centrifugal booster fans of Unit 4 in a steel-making plant. Data was acquired over a period of nearly a year (August 2010 to July 2011) before a catastrophic blade failure occurred. This dataset includes measurements from low speed (744 r/min) and high speed (993 r/min) operations. The paper also references experimental data and mathematical modeling to support their findings.
Key Insights and Ideas
- The "breathing crack" phenomenon: The paper highlights how a breathing crack in a fan blade causes a cyclical change in rotor stiffness, which manifests as a significant increase in the second harmonic component of the vibration signal. This is a crucial insight for developing sensitive crack detection methods.
- Limitations of traditional FFT: The authors clearly articulate the problem of energy leakage in FFT, motivating the use of discrete spectrum interpolation for more accurate amplitude and phase estimation.
- Synergy of LLE and K₂f: The combination of LLE and K₂f provides a more comprehensive diagnostic capability. LLE acts as an initial indicator of non-linear system behavior, while K₂f offers a quantitative measure of crack severity, allowing for a tiered alarm system.
- Practical applicability: The study demonstrates the effectiveness of their method on real-world data from an industrial setting, including a case study of a fan that experienced a catastrophic failure, validating the predictive power of their approach.
Key Results
- The proposed quantitative identification and abnormality alarm strategy successfully identified incipient blade crack faults in the centrifugal booster fans.
- The method was able to distinguish between normal operation, incipient faults, and serious faults based on the calculated LLE and K₂f values.
- The study successfully predicted the abnormal warning stage for a fan that later failed, indicating the potential for preventing such events through timely maintenance.
- The authors validated their approach by applying it to other fans (No. B and C) in the same unit, correctly identifying incipient and serious fault states that were later confirmed by physical inspection.
Limitations and Future Work
- Parameter Selection: The authors acknowledge that the thresholds 'a' and 'b' for the K₂f index were determined based on limited data and suggest that more extensive datasets are needed for more robust parameter selection.
- Signal Processing: While the proposed methods are effective, the authors suggest that future work could explore more advanced signal processing techniques for even better extraction of blade crack fault characteristics.
- Dynamic Modeling: The paper mentions the need for more effective dynamic modeling and analysis of cracked rotor blades to better understand crack initiation and propagation.
- Quantitative Diagnosis and Fault Location: The paper points out that while the method provides quantitative identification, further development is needed for precise quantitative diagnosis and fault location techniques to establish more refined maintenance plans.
Summary updated